• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.1
• /
• pp.61-69
• /
• 2001

Polycarbonate(PC) membranes for oxygen enrichment from air were prepared by the wet phase inversion method. In order to improve oxygen separation performances of the PC membrane, the effect of the added ethanol(nonsolvent) and $CuCl_2$(metal salt) concentration in the casting solution on morphology, oxygen permeability ami $O_2/N_2$ separation factor of the membrane was studied. In addition, tensile strength and elongation at break of the membrane were investigated. An asymmetric membrane with a dense top layer and a porous sublayer was obtained. The thickness of the dense top layer decreased with increasing amount of nonsolvent additive. Compared with pure PC membrane without additive(metal salt), the oxygen permeability and $O_2/N_2$ separation factor of the $PC/CuCl_2$ membrane are significantly improved. The oxygen permeability and $O_2/N_2$ separation factor is $5.25{\times}10^{-9}cm^3(STP){\cdot}cm/cm^2{\cdot}sec{\cdot}cmHg$ and 4.5, respectively. This improvement might be due to good interaction between metal salt and oxygen.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.156.1-156.1
• /
• 2016

Nickel sulfide (NiS) is one of the most promising candidates as an electrode material for supercapacitors due to its good capacitive properties, high electrical conductivity and low cost. In addition to the development of the new electrode materials, nanostructuring the electrode surface is one of the main issues in enhancing the capacitive performance of the supercapacitors because the increased surface area can improve the charge transfer and energy storage processes occurring at the electrode surface. However, most nanofabrication techniques require complicated and delicate nanoprocesses, and hence are not suitable for practical use. In this work, we developed a simple method to fabricate nanostructured NiS electrodes by depositing NiS onto $TiO_2$ nanoparticles. First, $TiO_2$ nanoparticles were spin-coated on a fluorine-doped tin oxide (FTO) substrate, and then NiS layers were deposited onto the $TiO_2$ nanoparticles by consecutive dip-coatings in the solutions containing nickel and sulfur precursors. This nanostructured NiS electrode showed significantly improved capacitive properties compared to the electrode of NiS films deposited without $TiO_2$ nanoparticles. The asymmetric full-cell supercapacitor with this nanostructured NiS electrode and activated carbon electrode was also fabricated and investigated.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.3
• /
• pp.414-426
• /
• 1997

Numerical computations were conducted to characterize the three-dimensional laminar flow through an injector orifice having an inclined angle of 30 .deg.. For this study, the incompressible Navier-Stokes equations in generalized curvilinear coordinates, using a pseudocompressibility approach for continuity equation, were solved. The computations were performed using the finite difference implicit, approximately factored scheme of Beam and Warming and multi-block grids of complete continuity at block interfaces. The multi-block computations were validated for the steady state using direct comparison of multi-block solutions with equivalent single-block ones, including 2-D 180.deg. TAD and 3-D 90.deg. pipe bend. The comparisons between the numerical solutions and the flow field measurements for a tube with sudden contraction were presented in this work for solution validation. Computational results showed the nature of complex flow fields within the inclined injector orifice, including strong pressure-driven secondary flows in the cross stream induced by the effect of streamline curvature. In addition, asymmetric secondary flows were induced in the Reynolds number range above assumed laminar flow regime considered. However, turbulence calculations and grid dependency studies are needed for more accurate computations.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.286-292
• /
• 2014

This paper presents a compact structure composed of an upper high-impedance transmission line, a middle extended parallel coupled line, and a pair of inter-coupled symmetrical stepped impedance stubs. Detailed investigation into this structure based on an equivalent circuit analysis reveals that this proposed structure exhibits a quasi-elliptic low-pass filtering response with three transmission zeros. Moreover, the positions of the three transmission zeros can be tuned and reallocated flexibly by choosing the proper circuit parameters. Finally, the design concept is validated through the design, fabrication, and measurement of two exemplary low-pass filters (LPFs) with one single unit and two cascaded asymmetric units. The measured results agree well with the simulated results. In addition, in the range of $1.42f_c$ to $7.03f_c$, the fabricated quasi-elliptic LPFs experimentally demonstrate a very wide upper-stopband of 20 dB using a compact size of only $0.0089{\lambda}_g{^2}$, where ${\lambda}_g$ is the guided wavelength of a $50{\Omega}$ transmission line at the central frequency.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.4
• /
• pp.289-296
• /
• 2005

This study aims to measure maximum holding times(MHTs) of symmetric and asymmetric whole body postures, and to compare three representative observational methods including OWAS, RULA, REBA, based on the MHTs. An experiment was conducted for obtaining the MHTs, in which hand position was used as experimental variable, and the MHT and subjective discomfort rating as dependent variables. The hand position was defined by the percentage of the shoulder height(%SH), the percentage of the arm reach(%AR) and rotation angle(R). The results showed that three independent variables of %SH, %AR and R significantly affected on the MHTs at ${\alpha}$=0.01, and that the MHTs were negatively linearly related to the discomfort scores of Borg CR10. It was also revealed that OWAS and REBA were less sensitive to postural stress than RULA. In addition, OWAS and REBA underestimated postural load of given postures compared to RULA. Therefore, it is recommended that among the three observational methods investigated in this study, RULA be used for a more precise evaluation of postural load.

• Pediatric Infection and Vaccine
• /
• v.22 no.2
• /
• pp.113-116
• /
• 2015

Posterior reversible leukoencephalopathy syndrome is a clinical radiographic syndrome of many causative factors. Sudden onset headache, vomiting, altered mental status, blurred vision and seizures are main symptoms shown in posterior reversible leukoencephalopathy syndrome. In addition, it typically shows radiological findings of edema in the white matter of posterior cerebrum, being in commonly bilateral but asymmetric. We report a case of poststreptococcal glomerulonephritis (PSGN) presenting as posterior reversible leukoencephalopathy syndrome. Immediate control of hypertension resulted in rapid and complete neurological recovery.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.375-384
• /
• 1994

Depending upon the eye and head movement, the visual field is often classified into three categories; stationary field, eye field and head field. To investigate the effect of background condition on the size of stationary field, an experiment was conducted, in which the subject was instructed to search a target with distinct orientations. In each trial, a single target was presented on the rear-view screen projected by the two-field tachistoscope, with the visual angle subtended 4.3.deg. vertically and horizontally. Density, meridian and subject showed a significant effect on stationary field at .alpha.=0.01, where density was inversely proportional to the size of stationary field. The size of the stationary field on horizontal axis was larger than that on vertical axis, and that on right and below meridian also larger than on left and lower meridian. The shape was found to be horizontally oriented oval and statistically asymmetric with respect to horizontal and vertical axes. The regression equation to predict stationary field on the given background condition was suggested. These results were expected to be used as a designing guideline when arranging displays and controls on panels such as automobile display panels, cockpits, etc. In addition, it can be inferred from the results that eye field and head field are also subjected to the influence of background condition.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.2
• /
• pp.75-82
• /
• 2013

Haploids are plants with a gametophytic number of chromosomes in their sporophytes. Androgenesis occurs from asymmetric division of pollen grains into generative cells and vegetative cells, followed by re-entry of the vegetative cell during S-phase, which causes microspores progress into G2/M transition in culture. One of the most interesting features of haploids is the possibility to produce doubled haploid (DH) individuals. Doubled haploidy is extremely useful to plant breeders because it enables shortened breeding periods and efficiency in selection of useful recessive agronomic traits. Doubled-haploid technology is not only applicable to breeding, but also to transformation programs of desired genes. In addition to practical breeding programs, DH lines provide useful materials of fundamental genetics including exploitation of QTLs and genes conferred with various agronomic traits by establishing DH populations. This paper provides historical overviews on androgenesis and describes several mechanisms associated with pollen embryogenesis, including mode of actions in pollen embryogenesis, mechanisms of chromosome doubling and factors affecting androgenesis. We also discuss recent progress in application of haploids to breeding, genes associated with in vitro response and drawbacks to anther culture for application of doubled haploids in crop breeding.

• Journal of Astronomy and Space Sciences
• /
• v.31 no.4
• /
• pp.285-294
• /
• 2014

The uneven mass distribution of the Moon highly perturbs the lunar spacecrafts. This uneven mass distribution leads to peculiar dynamical features of the lunar orbiters. The critical inclination is the value of inclination which keeps the deviation of the argument of pericentre from the initial values to be zero. Considerable investigations have been performed for critical inclination when the gravity field is assumed to be symmetric around the equator, namely for oblate gravity field to which Earth's satellites are most likely to be subjected. But in the case of a lunar orbiter, the gravity field of mass distribution is rather asymmetric, that is, sectorial, and tesseral, harmonic coefficients are big enough so they can't be neglected. In the present work, the effects of the first sectorial and tesseral harmonic coefficients in addition to the first zonal harmonic coefficients on the critical inclination of a lunar artificial satellite are investigated. The study is carried out using the Hamiltonian framework. The Hamiltonian of the problem is cconstructed and the short periodic terms are eliminated using Delaunay canonical variables. Considering the above perturbations, numerical simulations for a hypothetical lunar orbiter are presented. Finally, this study reveals that the critical inclination is quite different from the critical inclination of traditional sense and/or even has multiple solutions. Consequently, different families of critical inclination are obtained and analyzed.

• Journal of KIISE:Information Networking
• /
• v.37 no.4
• /
• pp.312-316
• /
• 2010

In this paper, we propose a game theoretic channel sharing model that allocates resources of a base station between MNO(Mobile Network Operator) and MVNO(Mobile Virtual Network Operator) in a fair and efficient manner. Considering the input traffic loads of MNO and MVNO, the proposed model uses the bargaining game theory to allocate channel resources between MNO and MNVO. When the input loads of the carriers are asymmetric, the proposed model increases the resource utilization by allocating more channel resources to the operator with high input load. In addition, the proposed model prevents the quality of service of an operator from degrading even if the input load of the other operators increases excessively.