• 제목/요약/키워드: Asymmetric Jet

검색결과 21건 처리시간 0.023초

2次元 亂流 Stepped Wall Jet 의 流動特性 (Flow Characteristics of Two-Dimensional Turbulent Stepped Wall Jet)

  • 부정숙;김경천;박진호;강창수
    • 대한기계학회논문집
    • /
    • 제9권6호
    • /
    • pp.732-742
    • /
    • 1985
  • 본 논문에서는 이 2차원 재부착분류(본문에서는 stepped wall jet라 명명함) 유동장을 재부착상류 부분, 재부착점 근방, 재부착 이후의 재발전 벽면분류 지역의 세 영역으로 구분하여 재부착 길이, 평균속도, 벽면정압을 측정하고 on-line에 의한 디지 틀 데이터 처리기법을 이용하여 난류강도, 레이놀즈 전단응력, 속도의 3승적(triple velocity product), integral length scale, Taylor's microscale 등을 실험적으로 구 하여 재부착 상류 부분에서는 자유분류와 비교하고, 재부착 이후에서는 2차원 벽면분 류와 비교하기로 한다.그리하여 초기 교란을 받는 분류가 벽면에 재부착하여 2차원 벽면분류로 재발전되어 가는 과정에 있어서의 평균 유동장과 급격한 변화를 갖는 난류 특성을 상세히 조사하여, 보다 일반적으로 적용될 수 있는 난류모델을 개발함에 있어 서 실험적인 자료를 제공하고자 한다. Fig. 1은 본 실험의 유동장에 대한 개약도를 보여주고 있다.

비행시험을 통한 비대칭 무장 형상의 조종성 개선에 관한 연구 (A Study on Improvement of Aircraft Handling Quality for Asymmetric Loading Configuration from Flight Test)

  • 김종섭;황병문;김성준
    • 제어로봇시스템학회논문지
    • /
    • 제12권7호
    • /
    • pp.713-718
    • /
    • 2006
  • Supersonic jet fighter aircraft have several different weapon loading configuration to support air-to-air combat and air-to-ground delivery of weapon modes. Especially, asymmetric loading configurations could result in decreased handling qualities for the pilot maneuvering of the aircraft. The design of the T-50 lateral-directional roll axis control laws change from beta-betadot feedback structure to simple roll rate feedback structure and gains such as F-16 in order to improve roll-off phenomena during pitch maneuver in asymmetric loading configuration. Consequently, it is found that the improved control law decreases the roll-off phenomenon in lateral axes during pitch maneuver, but initial roll response is very fast and wing pitching moment is increased. In this paper, we propose the lateral control law blending between beta-betadot and simple roll rate feedback system in order to decreases the roll-off phenomenon in lateral axes during pitch maneuver without degrading of roll performance.

A coupled vibration model of double-rod in cross flow for grid-to-rod fretting wear analysis

  • H. Huang;T. Liu;P. Li;Y.R. Yang
    • Nuclear Engineering and Technology
    • /
    • 제56권4호
    • /
    • pp.1407-1424
    • /
    • 2024
  • In Pressurized Water Reactors, most of the failed fuel rods are often observed at the periphery of the fuel assembly, especially near the core baffle. The rod vibration-induced fretting wear is a significant failure mechanism strongly correlated with the coolant and support conditions. This paper presents a coupled vibration model of double-rod to predict the grid-to-rod fretting (GTRF) wear. A motion-dependent fluid force model is used to simulate the coolant cross flow, the gap constraints with asymmetric stiffness between spring and dimple on the vibration form, and the fretting wear are discussed. The results show the effect of the coupled vibration on the deterioration of wear, providing a sound theoretical explanation of some failure phenomena observed in the previous experiment. Exploratively, we analyze the impact of the baffle jet on the GTRF wear, which indicates that the high-velocity cross-flow will significantly affect the vibration forms while sharply changing the wear behavior.

사각 노즐이 적용된 가변 추력용 측추력기의 유동특성에 관한 수치해석 (Numerical study on flow characteristics of a variable thrust side jet thruster with a rectangular nozzle)

  • 김리나;성홍계;전영진;조승환
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2012년도 제38회 춘계학술대회논문집
    • /
    • pp.110-116
    • /
    • 2012
  • 사각노즐을 갖는 측추력기의 유동 특성 분석과 성능 예측을 위해 3차원 수치해석을 수행하였다. RANS 기법을 이용하였으며 측추력기의 유량 조절 셔터가 회전하는 각도가 세 가지 경우에 대해 계산을 수행하였다. 셔터의 형상적인 특성으로 인한 내부의 재순환영역을 관찰하였고, 사각 노즐에서의 유동의 비대칭성을 확인하였다. 또한 셔터의 개폐 정도에 따라 노즐 내 유동의 비대칭성이 심화되어 추력이 편향되는 것을 관찰하였다. 셔터가 회전함에 따라 추력이 편향되는 정도와 추력 성능을 예측하고 이론적으로 계산한 추력 값과 비교하였다.

  • PDF

사각 노즐이 적용된 가변 추력용 측추력기의 유동특성에 관한 수치해석 (Numerical Study on the Flow Characteristics of a Side Jet Thruster Having Variable Thrust with a Rectangular Nozzle)

  • 김리나;성홍계;전영진;조승환
    • 한국추진공학회지
    • /
    • 제17권2호
    • /
    • pp.63-70
    • /
    • 2013
  • 사각 노즐을 갖는 측추력기의 유동 특성 분석을 위해 3차원 수치해석을 수행하였다. RANS 기법을 이용하였으며 측추력기의 유량 조절 셔터가 회전하는 각도는 두 가지의 경우에 대해 계산을 수행하였다. 셔터의 형상적인 특성으로 인한 내부의 재순환 영역을 관찰하였고, 사각 노즐에서의 유동의 비대칭성을 확인하였다. 또한 셔터의 개폐 정도에 따라 노즐 내 유동의 비대칭성이 심화되어 추력이 편향되는 것을 관찰하였다. 셔터가 회전함에 따라 추력이 편향되는 정도와 추력 성능을 예측하고 이론적으로 계산한 추력 값과 비교하였다.

비대칭 무장 형상의 조종성 개선에 관한 연구 (A Study on Improvement of Aircraft Handling Quality for Asymmetric Loading Configuration)

  • 김종섭;배명환;황병문
    • 한국항공우주학회지
    • /
    • 제33권2호
    • /
    • pp.106-112
    • /
    • 2005
  • 현대의 고성능 전투기는 공대공 및 공대지 전투 임무를 수행하기 위해 여러 가지 무장 형상을 하고 있고, 무장투하 시 비대칭 형상(Asymmetric Configuration)으로 임무를 수행하는 경우가 많다. 현재, 개발이 진행 중인 T-50 훈련기의 비대칭 무장형상 비행시험에서 세로축 기동 시 가로축 방향으로 조종사가 원하지 않는 운동이 발생하는데, 이는 항공기 안정성 및 조종성에 영향을 미칠 수 있다. 본 연구에서는 이러한 현상을 개선하기 위하여 기존의 가로축 제어법칙인 미끄럼각-미끄럼각속도 귀환 구조를 F-16과 같이 단순 롤각속도 귀환구조로 적용하였다. 연구결과, 단순 롤각속도 귀환구조로 가로축 제어법칙을 변경하였을 때 비대칭 무장형상에서 세로축 기동 시 가로축 운동의 발생이 줄어들었으며, 시스템의 안정도 여유는 설계기준에 만족한다는 것을 알 수 있었다.

Development of Flight Control Laws for the T-50 Advanced Supersonic Jet Trainer

  • Kim, Chong-Sup;Hur, Gi-Bong;Hwang, Byung-Moon;Cho, In-Je;Kim, Seung-Jun
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제8권1호
    • /
    • pp.32-45
    • /
    • 2007
  • The T-50 advanced supersonic jet trainer employs the Relaxed Static Stability (RSS) concept to improve the aerodynamic performance while the flight control system stabilizes the unstable aircraft and provides adequate handling qualities. The T-50 flight control laws employ a proportional-plus-integral type controller based on a dynamic inversion method in longitudinal axis and a proportional type controller based on a blended roll system with simple roll rate feedback and beta-betadot feedback system. These control laws are verified by flight tests with various maneuver set flight envelopes and the control laws are updated to resolve flight test issues. This paper describes several concepts of flight control laws used in T-50 to resolve those flight test issues. Control laws for solving the roll-off problem during pitch maneuver in asymmetric loading configurations, improving the departure resistance in negative angle of attack conditions and enhancing the fine tracking performance in air-to-air tracking maneuvers are described with flight test data.

IMAGING THE CIRCUMSTELLAR ENVELOPES AROUND EVOLVED STARS WITH THE SMA

  • HIRANO NAOMI;CHIU PO-JIAN;MULLER SEBASTIEN;TRUNG DINH-V
    • 천문학회지
    • /
    • 제38권2호
    • /
    • pp.219-222
    • /
    • 2005
  • We present the high-resolution (2"-4") images of the molecular envelopes surrounding the evolved stars, V Hya, VY CMa, and ${\pi}^1$ Gru observed with the Submillimeter Array. The CO J=2-1 and 3-2 images of the carbon star V Hya show that the circumstellar structure of this star consists of three kinematic components; there is a flattened disk-like envelope that is expanding with a velocity of ${\~}16 km\;s^{-1}$, the second component is the medium-velocity wind having a deprojected velocity of 40-120 km $s^{-l}$ moving along the disk plane, and the third one is the bipolar molecular jet having an extreme velocity of 70-185 km $s^{-l}$. The axis of this high velocity jet is perpendicular to the plane of the disk-like envelope. We found that the circumstellar structure of the S-star ${\pi}^1$ Gru traced by the CO J =2-1 resembles that of V Hya quite closely; the star is surrounded by the expanding disk-like envelope and is driving the medium-velocity wind along the disk plane. We also obtained the excellent images of VY CMa with the CO and $^{13}CO$ J=2-1 and $SO\;6_5-5_4$ lines. The maps of three molecular lines show that the envelope has a significant velocity gradient in the east-west direction, suggesting that the envelope surrounding VY CMa is also flattened and expanding along its radial direction. The high-resolution images obtained with the SMA show that some AGB stars are associated with the asymmetric mass loss including the equatorial wind and bipolar jet.

No asymmetric outflows from Sagittarius A* during the pericenter passage of the gas cloud G2

  • Park, Jong-Ho;Trippe, Sascha;Krichbaum, Thomas;Kim, Jae-Young;Kino, Motoki;Bertarini, Alessandra;Bremer, Michael;de Vicente, Pablo
    • 천문학회보
    • /
    • 제40권1호
    • /
    • pp.73.2-74
    • /
    • 2015
  • The gas cloud G2 falling toward Sagittarius A* (Sgr A*), the supermassive black hole at the center of the Milky Way, is supposed to provide valuable information on the physics of accretion flows and the environment of the black hole. We observed Sgr A* with four European stations of the Global Millimeter Very Long Baseline Interferometry Array (GMVA) at 86 GHz on 1 October 2013 when parts of G2 had already passed the pericenter. We searched for possible transient asymmetric structure - such as jets or winds from hot accretion flows - around Sgr A* caused by accretion of material from G2. The interferometric closure phases (which are zero if the spatial brightness distribution of the target is symmetric, and deviate from zero otherwise) remained zero within errors during the observation time. We thus conclude that Sgr A* did not show significant asymmetric (in the observer frame) outflows in late 2013. Using simulations, we constrain the size of the outflows that we could have missed to ${\approx}2.5$ mas along the major axis, ${\approx}0.4$ mas along the minor axis of the beam, corresponding to approximately 232 and 35 Schwarzschild radii, respectively; we thus probe spatial scales on which the jets of radio galaxies are suspected to convert magnetic into kinetic energy. As probably less than 0.2 Jy of the flux from Sgr A* can be attributed to accretion from G2, one finds an effective accretion rate ${\eta}M{\leq}1.5{\times}10^9kg/s{\approx}7.7{\times}10^{-9}M_{earth}/yr$ for material from G2. Exploiting the kinetic jet power-accretion power relation of radio galaxies, one finds that the rate of accretion of matter that ends up in jets is limited to $M{\leq}10^{17}kg/s{\approx}0.5M_{Earth}/yr$ less than about 20% of the mass of G2. Accordingly, G2 appears to be largely stable against loss of angular momentum and subsequent (partial) accretion at least on time scales ${\leq}1$ year.

  • PDF

PVDF 중공사막 제조 및 벤치규모 기-액 접촉기를 이용한 SO2 흡수특성 (Preparation of PVDF Hollow Fiber Membrane and Absorption of SO2 from Flue Gas Using Bench Scale Gas-Liquid Contactor)

  • 박현희;조항대;김인원;이형근
    • Korean Chemical Engineering Research
    • /
    • 제46권3호
    • /
    • pp.521-528
    • /
    • 2008
  • 중공사막 접촉기에 적절한 PVDF 중공사막을 상전이 공정에 의하여 제조하였으며, SEM 과 기체투과도에 의하여 그 특성을 분석하였다. 벤치규모 중공사막 접촉기에서 $SO_2$ 제거를 위한 흡수제는 수산화나트륨 수용액을 사용하였다. 기체는 shell side, 액체는 lumen side로 흐르는 counter-current로 실험하였으며, 흡수제의 농도, 기체의 유속, 액가스비, 유입 $SO_2$ 농도에 따른 영향을 알아보았으며, 수학적 모델링에 의해 막 물질전달계수($k_m$)를 측정하였다. 흡수제의 농도와 액기비가 증가함에 따라 기-액 계면에서 충분한 알칼리도가 제공되므로, 액체막 저항이 감소하며, 총괄물질전달 용량계수는 증가하였다. 기체유속이 증가함에 따라 기체막저항은 감소하게 되므로 총괄물질전달 용량계수는 증가하였다.