• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.2
• /
• pp.134-139
• /
• 2000

Ternary system of 40PMN-30PT-30PMW was prepared by using different reaction process. The PMN-PT was synthesized firstly, then it reacted to $PbWO_4$ as PbO and $WO_3$ sources. The dielectric constants were dependent on the density of sintered body and decreased with sintering temperature above $950^{\circ}C$. The highest dielectric constant was 24,000 in a sample sintered at $950^{\circ}C$ with the dielectric loss of 3 %. The temperature dependence of the dielectric constant were decreased with the increase of sintering temperature due to the appearance of double peak maxima. The lowest change in dielectric constant was -37-0 % from -55 to $125^{\circ}C$in a sample sintered at $1150^{\circ}C$ with dielectric constant of 9,900 at room temperature.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.292-298
• /
• 2002

Densified cordierite matrixes added alumina platelets were studied as a ceramic substrate material having a low thermal expansion coefficient, low dielectric constant and proper strength. Amorphous-type cordierite powders were filled with four kinds of alumina platelet powders in various compositions. All samples were sintered at $1300^{\circ}C$ for 2 h in an air atmosphere. Improved flexural strength of about 80 MPa, low dielectric constant of 5.0 at 1 MHz and low thermal expansion coefficient of $3.5 \times 10^{-6}/^{\circ}C$ were obtained by the control of the microstructure. Isolated micropores were formed in the matrix and the porosity was dependent on the platelet content and size. In the 10 vol% of alumina platelet content, the isolated micropores were 3~8 $\mu \textrm{m}$ in size, and an increase in dielectric constant by adding alumina platelet filler was inhibited by the micropores.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.3
• /
• pp.183-191
• /
• 2013

Prestress losses assumed for bridge girder design and deflection analyses are dependent on the concrete modulus of elasticity (MOE). Most design specifications, such as the American Association of State Highways and Transportation Officials (AASHTO) bridge specifications, contain a constant value for the MOE based on the unit weight of concrete and the concrete compressive strength at 28 days. It has been shown in the past that that the concrete MOE varies with the age of concrete. The purpose of this study was to evaluate the effect of a time-dependent and variable MOE on the prestress losses assumed for bridge girder design. For this purpose, three different variable MOE models from the literature were investigated: Dischinger (Der Bauingenieur 47/48(20):563-572, 1939a; Der Bauingenieur 5/6(20):53-63, 1939b; Der Bauingenieur, 21/22(20):286-437, 1939c), American Concrete Institute (ACI) 209 (Tech. Rep. ACI 209R-92, 1992) and CEB-FIP (CEB-FIP Model Code, 2010). A typical bridge layout for the Dallas, Texas, USA, area was assumed herein. A prestressed concrete beam design and analysis program from the Texas Department of Transportation (TxDOT) was utilized to determine the prestress losses. The values of the time dependent MOE and also specific prestress losses from each model were compared. The MOE predictions based on the ACI and the CEB-FIP models were close to each other; in long-term, they approach the constant AASHTO value. Dischinger's model provides for higher MOE values. The elastic shortening and the long term losses from the variable MOE models are lower than that using a constant MOE up to deck casting time. In long term, the variable MOE-based losses approach that from the constant MOE predictions. The Dischinger model would result in more conservative girder design while the ACI and the CEB-FIP models would result in designs more consistent with the AASHTO approach.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.2
• /
• pp.88-92
• /
• 2003

The correlationship between heat treatment condition and electrical properties of the Mn-Co-Ni oxide NTC thermistor for fuel level sensor was investigated by the X-ray diffractometry, density measurement, and electrical properties measurement such as resistivity, B constant, and thermal dissipation constant. It was shown that the heat treatment of NTC thermistor was responsible for sinterability of Mn-Co-Ni oxide. The highest density of 5.10 g/㎤ was obtained at $1250^{\circ}C$, 2 hours, at which the densification was almost completed. This is also manifested from the microstructural observation. It is found that the electrical resistivity and B constant are increased at the elevated sintering temperatures. The NTC specimens prepared in this study showed the conventional decrease of resistance with the measured temperature and the linear behavior of output voltage with fuel levels. Therefore, the electrical properties of thermistor were closely correlated with sintering condition. and the Mn-Co-Ni oxide thermistor prepared in this study has a great possibility enough to apply for an automobile fuel level sensor.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.1
• /
• pp.23-28
• /
• 2015

This study was conducted to evaluate the biodegradation characteristics of food waste on various collection systems using anaerobic batch test. The ultimate methane production from food waste in standard plastic garbage bags (sample A) was $285.6mL\;CH_4/g$ volatile solids (VS) which is the lowest, and reaction constant was $0.215d^{-1}$. The ultimate methane production from food waste in waste vessel based on RFID (sample D) was $493.4mL\;CH_4/g$ VS which is the highest, and reaction constant was $0.162d^{-1}$. The determinants of rate limiting step on all samples showed positive numbers, and the methane production step was found a rate limiting step.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.3
• /
• pp.113-120
• /
• 2007

Anaerobic batch tests were performed to evaluate the characteristics of methane production from piggery manure such as the ultimate methane yield (UMY), the kinetic constant and the maximum methane production rate. The kinetic behavior of anaerobic degradation of piggery manure was assumed as a first order reaction. The UMY, the first order kinetic constant and the maximum methane production rate were 0.27~0.44L $CH_4/gVS$, $0.161{\sim}0.280d^{-1}$ and 0.043~0.120L $CH_4/d$, respectively. Reactor of piggery manure as the self-seed source of anaerobic digestion resulted in longer acclimation time than reactors seeded with anaerobic digested sludge (ADS). But there was no little difference in the UMY between the two seed materials. The anaerobic digestion can be effective for the treatment of piggery manure containing high concentration of solids, the two-stage anaerobic digestion is, however, thought to be more effective than the traditional single one.

• The Journal of the Korea Contents Association
• /
• v.5 no.1
• /
• pp.179-187
• /
• 2005

Linear order Concentrators and Superconcentrators have been studied extensively for their ability to interconnect large numbers of devices in parallel, whether in communication systems or in parallel computers. One major limitation on the efficiency of parallel computer designs has been the prohibitively high cost of parallel communication between processors and memories. Linear order concentrators, O(n), can be used to construct theoretically optimal interconnection network schemes. Existing explicitly the defined constructions are based on expanders, which have large constant factors, thereby rendering them impractical lot reasonable sized networks. It demands the construction of concentrator which uses the expander with the smaller expansion constant. This paper introduces an improvement on the method of constructing concentrators using expanders, which reduce the size of resulting concentrator built from any given expander by a constant factor.

• Journal of Korea Port Economic Association
• /
• v.29 no.2
• /
• pp.239-253
• /
• 2013

Changes of a port's market share in the exports of domestic ports result from many interrelated factors. Therefore, the analysis of the export performance of a port should be put in perspective by analysing long periods to identify trends. This paper aims to show the development of competitiveness, product and geographical structure of the Busan Port's merchandise exports from 1995 to 2012 using constant-market shares (CMS) analysis. This article is relevant for Busan port because its export market shares have been showing disappointing path. The dynamic consideration of the CMS analysis, which the static indicators have been replaced by time series, helps to track all changes in the export structure and competitiveness of the Busan port over time. The long-term trend of the indicators suggests that it may be very hard for the Busan port to maintain its market share in the global environment. The advantage in competitiveness of the Busan port has vanished and the product and geographical structure effects show negative trends after 1995, pointing to vulnerability in the Busan port's exports.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.252-252
• /
• 2011

Rainfall-runoff models are calibrated and validated by using a same data set such as observations. The past climate change effects the present rainfall pattern and also will effect on the future. To predict rainfall-runoff more preciously we have to consider the climate change pattern in the past, present and the future time. Thus, in this study, the climate change represents changes in mean precipitation and standard deviation in different patterns. In some river basins, there is no enough length of data for the analysis. Therefore, we have to generate the synthetic data using proper distribution for calculation of precipitation based on the observed data. In this study, Kajiyama model is used to analyze the runoff in the dry and the wet period, separately. Mean and standard deviation are used for generating precipitation from the gamma distribution. Twenty hypothetical scenarios are considered to show the climate change conditions. The mean precipitation are changed by -20%, -10%, 0%, +10% and +20% for the data generation with keeping the standard deviation constant in the wet and the dry period respectively. Similarly, the standard deviations of precipitation are changed by -20%, -10%, 0%, +10% and +20% keeping the mean value of precipitation constant for the wet and the dry period sequentially. In the wet period, when the standard deviation value varies then the mean NSE ratio is more fluctuate rather than the dry period. On the other hand, the mean NSE ratio in some extent is more fluctuate in the wet period and sometimes in the dry period, if the mean value of precipitation varies while keeping the standard deviation constant.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.76-83
• /
• 2007

In the sequentially rotated array antennas, the characteristics of antenna gain, axial ratio and cross polarization have been analyzed with a varying of sequential array constant(number of array element, figure of rotation) respectively. Where the antenna element of array is a probe feeding, LHCP truncated microstrip antenna whose resonant frequency is in 11.85GHz. The simulation results of 23 SRA antennas((M=2, 3, 4, 6, 8), $(1\leqP\leqM)$) has shown as follows. The widest 3dB bandwidth of axial ratio appears at P=2 which is in-dependant of M, the highest antenna gain appears when a sequential array constant has a pair of (2, 1), (3, 2), (4, 1), (6, 3), (8, 1) respectively. Specially, all of the SRA antenna appear very poor characteristics in case of M=P. Therefore the SRA antenna has to be designed as selecting a optimal sequential array constant among a lot of simulation data.