• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3851-3863
• /
• 2024

The speed of offsite consequence analysis is highly important due to the extensive calculations required to handle all the scenarios for a single-unit or multi-unit Level 3 PSA (probabilistic safety assessment). To perform an offsite consequence analysis as part of Level 3 PSA, various input parameters are considered, amongst which certain parameters, such as plume segments, spatial grids, and particle size distributions, have flexible input formats. This study describes the development of an effective optimization method to reduce the analysis time as much as possible while maintaining the accuracy of the offsite consequence analysis results. The effect of plume segmentation on offsite consequence analysis was investigated by observing deviations in analysis results and changes in the required analysis times following changes in plume release. Then a plume segmentation optimization method based on the cumulative release fraction slope was developed to intensively analyze the sections with rapid release and to simplify the analysis for the sections with nonsignificant release. As a result of applying this method, the analysis time was reduced by about 54.5 % compared to the base case, while the resulting health effects showed very small deviations of 0.03 % and 1.77 % for early fatality risk and cancer fatality risk, respectively.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.247-255
• /
• 2011

Currently, there is database for per unit requirements of major construction materials in terms of energy consumption and $CO_2$ emission based on the input-output table published by the Bank of Korea in 2000, but no database for per unit requirements based on input-output tables was published in 2005 and 2007. The purpose of this study was to calculate the unit requirement values of major construction materials in terms of energy consumption and $CO_2$ emission generated by using the input-output tables published in 2005 and 2007. To estimate the unit requirement values, a database building method with the input-output tables was adopted by selecting 16 types of construction materials in wide use on construction sites. When the study results were compared with existing unit requirement values based on the input-output table of 2000, there were small discrepancies, from which it can be interpreted that the method used in the study is reasonable. Unit requirement values estimated based on input-output tables of 2005 and 2007 tended to decrease, and the highest value of energy consumption and $CO_2$ emission were found in the materials using cement and rebar.

• Journal of Korean Academy of Nursing Administration
• /
• v.5 no.2
• /
• pp.389-400
• /
• 1999

The purpose of this study is to examine a possibility of applying the ABC system to analyze the cost of nursing service on one obstetrics and gynecology (OB/GYN) unit in a major medical center. The activities of nurses on an OB/GYN unit were analyzed for 4 days for 96 hours. 2 week days and 2 days on weekend. Total cases included in the study were activities of 12 charge nurses and 12 staff nurses. Activities were categorized into direct and indirect activities in order to calculate the cost of activities. Nursing activities were defined multidimesionally in order to utilize the ABC system. The 60 nursing activities were classified into the direct nursing activities and the indirect nursing activities based on a literature review, interview, and survey results. The direct activities were further categorized into the single nursing activities and the multiple nursing activities. The indirect activities were classified into the indirect nursing service activities and the general management activities. The major findings of this study were as follows : 1. There were differences in activities according to the positions and duties of the nurses. The charge nurses mostly performed the indirect nursing service activities and the general management activities. Almost all of their indirect nursing activities spent on each patient were similar. The staff nurses performed the single nursing activities and the multiple nursing activities. 2. The activities of staff nurses included medication, patient assessment, rounding and organizing the unit. patient education, nursing treatment, admission and discharging of patients. There was no differences in types and amount of time spent between the nurses on day-time duty and evening-time duty, but the patient assessment activity increased during the night-time. 3. The cost of post partum nursing services for women who had a normal vaginal delivery using the ABC system included the cost incurred by direct nursing activities provided by the staff nurses (85.9%), indirect nursing activities incurred by the staff nurses(19.0%) and the nursing activities by the charge nurses and the head nurse(14.1%). The ABC system is a relatively new method of cost analysis. The results of this study can provide the nursing and hospital managers with useful information on cost control. It is suggested that more studies should be done using the ABC system and extend the scope of studies to include value analysis to aid the Activity-Based Management(ABM) and/or the reengineering of hospital process.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.2
• /
• pp.114-119
• /
• 2013

The present study tested 5 concrete mixes to develop reliable mixing proportions for the sustainable alkali-activated(AA) foamed concrete as a thermal insulation material for the floor heating system of buildings. The AA binder used was composed of 73.5% ground granulated blast-furnace slag, 15% fly ash, 5% calcium hydroxide, and 6.5% sodium silicate. As a main variable, the unit binder content varied from $325kg/m^3$ to $425kg/m^3$ at a space of $25kg/m^3$. The test results revealed that AA foamed concrete has considerable potential for practical applications when the unit binder content is close to $375kg/m^3$, which achieves the minimum quality requirements specified in KS F 4039 and ensures economic efficiency. In addition, lifecycle assessment demonstrated the reduction in the environmental impact profiles of all specimens relative to typical ordinary portland cement foamed concrete as follows: 99% for photochemical oxidation potential, 87~89% for global warming potential, 78~82% for abiotic depletion, and 70~75% for both acidification potential and human toxicity.

• Journal of Wetlands Research
• /
• v.10 no.1
• /
• pp.59-68
• /
• 2008

Three phases of development in construction projects (i.e. pre-development, construction and post construction) diversely effect the environment, hydraulics and ecosystem. Currently, the domestic environmental policy is in control of the various environmental hazards produced after completion of development operations. Nevertheless, with the enforcement of water pollution total amount management system, improving the water quality; also the water and ecosystem preservation law recommends enforcing the sediment management for development operations in order to lessen the negative impacts to the environment. Recently, the country is experiencing difficulties in various development project locations due to insufficiency of interpreting the fundamental data for sediment loss and miscalculation of soil loss unit loads of sediment. This research utilizes data from 2000 to 2005 discussing a total of 1,036 environment impact assessment projects gathered from various ministries and offices namely Ministry of Environment (MOE), Ministry of Agriculture, the Office of Forestry, and Ministry of Construction and Transportation. Moreover, quantity of sediment from high land agriculture reports involving contaminant discharge characteristic investigation previously did concerning old land agriculture and So-Yang lake non-point pollution source management area as well as management measured data from MOE. The findings of this study reveal that the highest soil loss rate occurred from mountain district for pre-development and post construction and sports facility during construction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3911-3916
• /
• 2010

In this paper we describe contents and results on running test for ATP on-board equipment, which has propelled as one of the research projects, so called, "Reliability assessment and operation technology development for Korean-type tilting trains" in order to ensure the safety and operation efficiency of tilting trains. We developed tilting trains for the speed-up of conventional lines and for the passenger service improvement where the KTX is not available. And we made progress the operation trial test in the 120,000 km distance with the use of ATS equipment, used in existing lines, for the purpose of the reliability assessment of the developed tilting trains. We decided to accelerate the speed for more than 200km/h with respect to the 6 existing lines including Jungang-line and Chungbuk-line where KTX has not operated. According to this decision, Train control system is to be changed from ATS to ATP. We should have installed an ATP on-board unit in tilting trains and verified the operational suitability, therefore we installed the same ATP on-board unit on tilting trains as that used in the ATP construction project on Gyeongbu-line and Honam-line, and verified that the function and performance of the installed ATP on-board unit conformed to the tilting trains operation.

• Journal of Environmental Impact Assessment
• /
• v.14 no.5
• /
• pp.305-315
• /
• 2005

The scheme to classify pollution sources in Korean TMDL planning has been pointed out too much complex to implement practically because of requiring a wide range of items to be collected from a field. Within a deficient situation to collect field data, the mathematical scheme that focuses only on counting an uniform area ratio of the different land uses to estimate of pollutant loads from individual sub-catchments has been used without taking into account of the spatial characteristics of major land uses as well as the locations of pollution sources in each sub-catchment. It would cause to significant level of errors to estimate the pollution loads. Therefore, this study proposes a renovated scheme that can be adopted more easily to classify pollution sources in the watershed and reduce the estimation errors in the spatial distribution of pollution sources by introducing a spatial analysis based on digital land cover maps. In order to estimate a unit area to calculate the uniform pollution load, the pollution response unit area that is locating spatially at the same place and having same land use is identified through the application of GIS overlay technique. Unlikely existing conventional method to calculate the pollution load based on equal distribution of pollutants for each administrative boundary, it is assumed that the pollution load from household and livestock sources are generated and washed off from only residential areas. While, pollution from business population comes from commercial area and industrial load from wastewater discharge facilities are from industrial areas. From comparison of the calculated results from the existing the method and the proposed one, it is found that although the estimation of pollution load from sub-catchment in the case of the existing conventional method application results in negligible difference in total pollution amounts from the whole area of Wangsook watershed as a study area, significant difference of pollution load among sub-catchment in which pollution response unit areas are diverse, however, appears in the case of the application of the renovated scheme.

• Korean Journal of Organic Agriculture
• /
• v.20 no.3
• /
• pp.297-311
• /
• 2012

Since 1997, Korean Ministry of Knowledge Economy and Ministry of Environment have established data on some 400 basic raw and subsidiary materials and process like energy, petro-chemical, steel, cement, glass, paper, construction materials, transportation, recycling and disposal etc by initiating establishment of LCI database. Regarding agriculture, Rural Development Administration has conducted establishment of LCI database for major farm products like rice, barley, beans, cabbage and radish etc from 2009, and released that they would establish LCI database for 50 items until 2020 later on. The domestic LCI database for seeds, seedling, agrochemical, inorganic fertilizer and organic fertilizer etc is only at initial stage of establishment, so overseas LCI databases are brought and being used. However, since the domestic and overseas natural environments differ, they fall behind in reliability. Therefore, this study has the purpose to select organic farming materials, survey the production process for various types of organic farming materials and establish LCI database for the effects of greenhouse gas emitted during the process in order to select carbon basic units for agricultural production system compliant in domestic situation instead of relying on overseas data and apply life cycle assessment of greenhouse gas emitted by each crop during the process. As for selecting methods, in this study organic farming materials were selected in the method of direct observation of material and bottom-up method a survey method with focus on the organic farming materials admitted into rice production. For the basic unit of carbon emission amount by the production of 1kg of organic farming material, the software PASS 4.1.1 developed by Korea Accreditation Board under Ministry of Knowledge Economy was used. The study had the goal to ultimately provide basic unit to calculate carbon emission amount in executing many institutions like goal management system and carbon performance display system etc in agricultural sector to be conducted later on. As a result, emission basic units per 1kg of production were calculated to be 0.0088kg-$CO_2$ for charcoal, 0.1319kg-$CO_2$ for grass liquid, and 0.2804kg-$CO_2$ for microbial agent.

• Journal of Korean Academy of Nursing Administration
• /
• v.3 no.2
• /
• pp.123-136
• /
• 1997

The purpose of this study was to confirm the classification of nursing activity and to analyze the time of nursing workload in a new open hospital. The data were collected from 20 nurses working in 6 general nursing units by 4 trained observers. The tools used for this study were an observation recording sheet and a classification sheet of nursing activity. The classification sheet was constructed to be adaptable to each hospital system based on the instrument described in the literature. The results of the study are as follows : The direct nursing activities consisted of 6 sections, 33 subsections and the indirect nursing activities consisted of 14 sections, 53 subsections. The direct nursing activities included medication, measuring and observation, care of therapies, care of physical comfort, laboratory and treatment. The indirect nursing activities included preparation of medical utensils, collection of information and assessment, recording, phone communication, professional interaction related to patients, personal time, assigning work to staff, patient eaucation and training, interaction with lab, transfer of administration of utensils, checking physician's order, dietary service, management of pollution and contagion, guide direction. Nurses spent 127.6min for direct nursing activity during day duty. It was 24.5% of total nursing activity. Within that activity medication had the highest percentage of time(40.09%), followed by communication and education with patient(24.76%), measuring and observation (16.93%), laboratory and treatment (12.85%), care of therapies(3.21%) and care of physical comfort (2.16%). The time breakdown for indirect nursing activities is as follows ; the preparation of medical utensils 22.3%, collection of information and assessment 20.29%, recording 20.27%, phone communication 8.14%, professional interaction related to patients 7.33%, personal time 7.24%, with the remaining timeshared by staffing, patient education and training, interaction with lab, transfer of administration of utensils, checking physician's order, dietary service, management of pollution and contagion, guide direction. In the analysis of the relationships between the working time and the work allocation characters of the nurses(including nurse's experiences. nurse-patients ratio, nurse-rooms ratio, and character of nursing unit) ; There were no significant differences in direct-indirect nursing times between nurse's career years. There was significant difference in direct nursing time between assigned patient numbers. The nurses assigned larger number of patients spent significantly more time in direct nursing care than that of the smaller. On the other hand, there was no significant difference in indirect nursing workload between the assigned patient numbers. There were no significant differences in direct-indirect nursing time between an allocated patient's room numbers. There was significant difference in working time between working places. The nurse in the medical unit spent more time in direct nursing care than her counterpart in the surgical unit. However there was no difference in direct nursing time between two groups. The study results indicate that nurses spent less time in the direct nursing care than in the previous studies even though the hospital system has been modernized. On the other hand they spent much more time for the coordinating role within the interdisciplinary team and for the overlapping paperwork. Therefore it is recommended that patient oriented job description and more efficient usage of modernized utilities be made.

• Journal of The Korean Association For Science Education
• /
• v.30 no.6
• /
• pp.681-692
• /
• 2010

The purpose of this study is to analyze the teaching-learning effect of using self-regulated learning strategy on experimental classes for the 'kinetics' unit of 10th grade science textbook. Six classes were chosen and classified into two groups: the first group, the control group, was taught with the regular laboratory activity and the other group, the experimental group, was taught with the teaching-learning method using self-regulated learning program. After the laboratory activity for the unit using self-regulated learning program, the mean values of the scientific inquiry, scientific attitudes, and performance assessment of the experimental group were larger than those of the control group. There were significant differences between the two groups in the post-test. With the results of the post-test for the experimental group, the self-regulated learning program has significant relationships on scientific inquiry, scientific attitudes, and scientific achievements.