• 제목/요약/키워드: Assembly bow

검색결과 7건 처리시간 0.016초

Measurement of nuclear fuel assembly's bow from visual inspection's video record

  • Dusan Plasienka;Jaroslav Knotek;Marcin Kopec;Martina Mala;Jan Blazek
    • Nuclear Engineering and Technology
    • /
    • 제55권4호
    • /
    • pp.1485-1494
    • /
    • 2023
  • The bow of the nuclear fuel assembly is a well-known phenomenon. One of the vital criteria during the history of nuclear fuel development has been fuel assembly's mechanical stability. Once present, the fuel assembly bow can lead to safety issues like excessive water gap and power redistribution or even incomplete rod insertion (IRI). The extensive bow can result in assembly handling and loading problems. This is why the fuel assembly's bow is one of the most often controlled geometrical factors during periodic fuel inspections for VVER when compared e.g. to on-site fuel rod gap measurements or other instrumental measurements performed on-site. Our proposed screening method uses existing video records for fuel inspection. We establish video frames normalization and aggregation for the purposes of bow measurement. The whole process is done by digital image processing algorithms which analyze rotations of video frames, extract angles whose source is the fuel set torsion, and reconstruct torsion schema. This approach provides results comparable to the commonly utilized method. We tested this new approach in real operation on 19 fuel assemblies with different campaign numbers and designs, where the average deviation from other methods was less than 2 % on average. Due to the fact, that the method has not yet been validated during full scale measurements of the fuel inspection, the preliminary results stand for that we recommend this method as a complementary part of standard bow measurement procedures to increase measurement robustness, lower time consumption and preserve or increase accuracy. After completed validation it is expected that the proposed method allows standalone fuel assembly bow measurements.

Mechanical analysis of the bow deformation of a row of fuel assemblies in a PWR core

  • Wanninger, Andreas;Seidl, Marcus;Macian-Juan, Rafael
    • Nuclear Engineering and Technology
    • /
    • 제50권2호
    • /
    • pp.297-305
    • /
    • 2018
  • Fuel assembly (FA) bow in pressurized water reactor (PWR) cores is considered to be a complex process with a large number of influencing mechanisms and several unknowns. Uncertainty and sensitivity analyses are a common way to assess the predictability of such complex phenomena. To perform such analyses, a structural model of a row of 15 FAs in the reactor core is implemented with the finite-element code ANSYS Mechanical APDL. The distribution of lateral hydraulic forces within the core row is estimated based on a two-dimensional Computational Fluid Dynamics model with porous media, assuming symmetric or asymmetric core inlet and outlet flow profiles. The influence of the creep rate on the bow amplitude is tested based on different creep models for guide tubes and fuel rods. Different FA initial states are considered: fresh FAs or FAs with higher burnup, which may be initially straight or exhibit an initial bow from previous cycles. The simulation results over one reactor cycle demonstrate that changes in the creep rate and the hydraulic conditions may have a considerable impact on the bow amplitudes and the bow patterns. A good knowledge of the specific creep behavior and the hydraulic conditions is therefore crucial for making reliable predictions.

A New Design Procedure for the Evaluation of Rod Bow DNBR Penalty

  • Paik, Hyun-Jong;Yang, Seung-Geun
    • Nuclear Engineering and Technology
    • /
    • 제28권3호
    • /
    • pp.331-338
    • /
    • 1996
  • In the thermal-hydraulic design, the effect of fuel rod bow is quantified tv the rod bow DNBR penalty which is a key design parameter to assure the coolability of fuel assembly in the pressurized water reactor. In this work, a computer program for the evaluation of the rod bow DNBR penalty based on Westinghouse methodology is developed and its application procedure is proposed. The computer simulation is based on the Monte-Carlo method. The qualification of developed computer program is performed by a comparison of calculational result with that given by Westinghouse's document. A new application procedure is built using batch mean and batch standard deviation. The normality of sample population generated by the batch calculation is confirmed by means of a chi-square test for goodness of fit. On the view point of statistics it is effected that the more reliable design value may be produced by the new application procedure.

  • PDF

잔류응력이 낮은 평탄한 판재 제조를 위한 열연 코일 교정 조건 도출 (Leveling Condition in Cut-To-Length Lines to Produce Low Residual Stress Flat Plate from Hot Rolled Coils)

  • 박기철;김홍준;김교성
    • 소성∙가공
    • /
    • 제15권4호
    • /
    • pp.311-318
    • /
    • 2006
  • One of the most important quality problems in flat plate leveled from hot rolled coils in cut-to-Iength lines is bowing and cambering when they are cut in small width parts. It is verified analytically and experimentally that residual stress remained in plate is th ε source of the problem. In order to produce low residual stress flat plate from hot rolled coils, the proper conditions of leveling are studied and two things are implemented. One is proper plastic deformation area ratio to reduce residual stress within customer requirement by applying suitable plastic deformation and maintain leveling load within structural strength limit of leveler. The other is maintaining uniform plastic deformation along the width of the plate during leveling. Customer requirement for residual stress is met by applying above 70% of plastic deformation area ratio and uniform deformation along width of coil by adjusting back up rolls according to deformation analysis of work roll and back up roll assembly and leveling tests.

모형실험 및 수치 시뮬레이션을 이용한 쌍동형 준설선의 선형 설계에 관한 연구 (Hull Form Design of Catamaran Type Dredging Vessel Using Model Test and Numerical Simulation)

  • 이영길;손충렬;정우철;강대선;정광열;김도정
    • 한국해양공학회지
    • /
    • 제20권2호
    • /
    • pp.66-71
    • /
    • 2006
  • To develope a hull form of catamaran type dredging vessel, resistance characteristics is investigated to find the interaction effect of waves between the two hulls. Re fore body shape is simplified as two dimensional wedge shape for the maintenance and disassembly/assembly. Based on MAC method, numerical simulation is performed in staggered variable mesh system. Re conservation form of Euler equations and continuity equation are applied as governing equations. To verify numerical methods, the wive patterns along the hull surface are compared with the results of model tests. This study is performed as varying wedge shape of the bow and the distance between the two hulls. The wave interaction between two hulls are observed to investigate the relation the resistance performance and the flow characteristics. Suitable hull form and distance between two hulls are discussed.

Fuel Cell End Plates: A review

  • Kim, Ji-Seok;Park, Jeong-Bin;Kim, Yun-Mi;Ahn, Sung-Hoon;Sun, Hee-Young;Kim, Kyung-Hoon;Song, Tae-Won
    • International Journal of Precision Engineering and Manufacturing
    • /
    • 제9권1호
    • /
    • pp.39-46
    • /
    • 2008
  • The end plates of fuel cell assemblies are used to fasten the inner stacks, reduce the contact pressure, and provide a seal between Membrane-Electrode Assemblies (MEAs). They therefore require sufficient mechanical strength to withstand the tightening pressure, light weight to obtain high energy densities, and stable chemical/electrochemical properties, as well as provide electrical insulation. The design criteria for end plates can be divided into three parts: the material, connecting method, and shape. In the past, end plates were made from metals such as aluminum, titanium, and stainless steel alloys, but due to corrosion problems, thermal losses, and their excessive weight, alternative materials such as plastics have been considered. Composite materials consisting of combinations of two or more materials have also been proposed for end plates to enhance their mechanical strength. Tie-rods have been traditionally used to connect end plates, but since the number of connecting parts has increased, resulting in assembly difficulties, new types of connectors have been contemplated. Ideas such as adding reinforcement or flat plates, or using bands or boxes to replace tie-rods have been proposed. Typical end plates are rectangular or cylindrical solid plates. To minimize the weight and provide a uniform pressure distribution, new concepts such as ribbed-, bomb-, or bow-shaped plates have been considered. Even though end plates were not an issue in fuel cell system designs in the past, they now provide a great challenge for designers. Changes in the materials, connecting methods, and shapes of an end plate allow us to achieve lighter, stronger end plates, resulting in more efficient fuel cell systems.

디지털세 국제 합의가 국내 산업에 미치는 영향에 대한 탐색적 연구 (An exploratory study on the impacts of International Digital Tax Agreement on Korean Industry)

  • 이진휘;김태열
    • Journal of Platform Technology
    • /
    • 제9권4호
    • /
    • pp.10-31
    • /
    • 2021
  • 최근 구글 세라고 지칭되는 디지털 세가 OECD 제31차 총회(2021. 10. 08)에서 136개국의 전폭적인 지지로 최종 합의되어 2023년부터 시행될 예정이다. 본 연구의 목적은 OECD가 글로벌 MNE를 대상으로 마련한 디지털 세에 대하여 분석하고 국내 산업에 미치는 파급효과와 우리나라의 대응 방안을 제시하는 것이다. 첫 번째 연구로 디지털 세에 대한 국제합의 내용을 분석한 결과, 글로벌 MNE가 해외 국가에 사업장을 설치하지 않더라도 매출과 이익이 발생하면 초과이익금의 25%를 세금으로 부담하고(필라1), 모든 국가에서 사업을 수행하면 최소 15%의 세금을 부담하는 것이다(필라 2). 이것은 세계 각 국가가 글로벌 MNE가 향후 자국 시장을 쉽게 잠식할 것을 예상하여 자국 기업을 보호하는 최소한의 대응책을 마련하기 위한 것으로 판단된다. 두 번째 연구는 글로벌 MNE는 왜 그렇게 강력한가? 에 대한 이유를 찾기 위해서 구글과 B2B SaaS 기업을 중심으로 동향을 분석하였다. 분석 결과, 글로벌 MNE는 디지털플랫폼 파트너십 생태계를 구축하여 해외 국가에 쉽게 진입하고 신속히 확장해 나가는 것을 발견하였다. 결론에서 우리의 대응 방안으로 산업육성정책을 창업 기업, 산업 그리고 국가 수준으로 각각 구분하여 제시하였다.