• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.267-268
• /
• 2006

The cylinder cover stud of low-speed marine diesel engine is more than just a stud. It is a large structural element occasionally weighing over 200 kg used for assembling the combustion chamber components. Therefore, to understand the structural behavior of the stud and design it safely is quite important considering a catastrophic failure which can be arisen from an inadequate use of it. In this paper, the analysis results of the structural behavior of the stud is introduced. Strain measurement results compared with FE analysis results are summarized. The results showed that 1) the stud stress increased with engine operating load, 2) the maximum stress amplitude was about 10 MPa which is far smaller than the stud's fatigue strength of 61 MPa, 3) the stress ratio is higher than 0.9 and the stud's load factor is about 20 %, and 4) about 7 % of initial pressure tightening load was reduced while changing to a nut tightened condition.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.5
• /
• pp.774-781
• /
• 2013

A structural analysis was carried out for a 60 N.m class flexible disk coupling. Flexible disk couplings are used to transmit power between two shafts. When a flexible coupling is used, some amount of misalignments such as angle of deviation and end play can be allowed in assembling the shafts. However, the maximum allowable misalignment should be decided to guarantee the fatigue life. In this study, the effect of the angle of deviation and end play on the maximum stress was investigated. From the analysis results, it was shown that the angle of deviation has a greater effect on the maximum stress than the end play. Furthermore, the dimensions of the disk plate were optimized to realize a better design. From the optimization, the maximum stress could be reduced by up to 5.2%.

• The Journal of the Korea Contents Association
• /
• v.14 no.2
• /
• pp.409-420
• /
• 2014

The purpose of this study is to examine the level of stress and depressive symptom and to assess the utilization of professional consultation. Data extracted from Community Health Survey (CHS), conducted by Korea Centers for Disease Control and Prevention. The subjects were 174,975 (19-65 years). In result, 'Managers', 'Professionals and related workers', 'Clerks', 'Service workers', and 'Sales workers', 'Equipment, machine operating assembling workers', and 'Armed forces' were more in risk of stress. However, theses groups were less in probability of utilization for stress consultation. Based on these findings, mental health screening program for detecting risk group among occupation classification and employment status will be essential. It may be necessary to have sustainable strategies for utilizing mental health service to reduce the level of stress and depressive symptom of workers.

• Journal of Powder Materials
• /
• v.13 no.6 s.59
• /
• pp.415-420
• /
• 2006

Nanostructured metallic materials are synthesized by bottom-up processing which starts with powders for assembling bulk materials or top-down processing starting with a bulk solid. A representative bottom-up and top-down paths for bulk nanostructured/ultrafine grained metallic materials are powder consolidation and severe plastic deformation (SPD) methods, respectively. In this study, the bottom-up powder and top-down SPD approaches were combined in order to achieve both full density and grain refinement without grain growth, which were considered as a bottle neck of the bottom-up method using conventional powder metallurgy of compaction and sintering. For the powder consolidation, equal channel angular pressing (ECAP), one of the most promising method in SPD, was used. The ECAP processing associated with stress developments was investigated. ECAP for powder consolidation were numerically analyzed using the finite element method (FEM) in conjunction with pressure and shear stress.

• Korea-Australia Rheology Journal
• /
• v.13 no.3
• /
• pp.141-148
• /
• 2001

In this research, experimental studies leave been performed on the hydrodynamic interaction between a spherical particle and a plane wall by measuring the force between the particle and wall. To approach the system as a resistance problem, a servo-driving system was set-up by assembling a microstepping motor, a ball screw and a linear motion guide for the particle motion. Glycerin and dilute solution of polyacrylamide in glycerin were used as Newtonian and non-Newtonian fluids, respectively. The polymer solution behaves like a Boger fluid when the concentration is 1,000 ppm or less. The experimental results were compared with the asymptotic solution of Stokes equation. The result shows that fluid inertia plays all important role in the particle-wall interaction in Newtonian fluid. This implies that the motion of two particles in suspension is not reversible even in Newtonian fluid. In non-Newtonian fluid, normal stress difference and viscoelasticity play important roles as expected. In the dilute solution weak shear thinning and the migration of polymer molecules in the inhomogeneous flow field also affect the physic of the problem.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1659-1663
• /
• 2011

Precast concrete slab track is a track structure to be installed by transporting and assembling precast concrete slabs manufactured at the factory. This method can improve concrete quality, provide easy maintenance and reduce construction time, compared with in-situ concrete track. However, the concrete slabs being continuously connected in longitudinal direction, due to the temperature change between summer and winter, the openings at slab joints have occurred. Thus, in this study, to identify the cause of this opening of slab joint, the joint opening caused by temperature drop in the longitudinally continuous precast concrete slab track has been predicted using three-dimensional finite element analysis, and compared with field measurements. Based on the proven model, the slab joint opening, and the stress pattern of concrete slab and steel reinforcement according to concrete slab-base friction properties, concrete-reinforcement bond properties, and prestressing were analyzed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.131-137
• /
• 2013

Gas springs have been widely used in motor vehicles as well as in most areas of industry. Instead of coil springs, these gas springs are easily operated to extrusion process or compression process the doors because $N_2$ gas with high pressure and oil are charged in tube. Gas spring sustain the constant elasticity change rate in the high reaction force and long stroke, and they have compact design, appearance and an excellent assembling ability to be mounted easily with any applicatory products. By means of these aspects, gas springs have been widely used in stead of coil springs in the over all industries. In this study, using acommonly used program, ANSYS, the basic research about the heat transfer and equivalent stress change of bimetal.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.1
• /
• pp.20-32
• /
• 1995

Springs for vehicle suspension control the vibration of a car and influence on the ridability, safety, and life of a car. In the paper, the computer aided design program has been developed, which design the leaf spring shape from the given specifications using basic theory and the expert's knowledge, and the design results are checked by the analysis theory in order to increase the accuracy, and feed back to the design input. For the purpose of easy use, this program consists of pull-down menu and interactive input mode. To prove the effectiveness of this program. two springs, of which one is symmetric, other asymmetric, are designed and analyzed, and the outputs are compared to the experiments. Considering the tolerance of the given specifications, the results are good.

• Journal of Applied Biological Chemistry
• /
• v.64 no.1
• /
• pp.39-48
• /
• 2021

Droughts are one of the abiotic stresses that hinders the growth and productivity of crop plants. Coping with abiotic stress is necessary to understand the molecular regulatory networks that makes plants respond to adverse environmental conditions. In our experiment to find a combination that can cope with abiotic stress (respond to drought), we screened 5 stress-inducible promoters that are expressed only under stress conditions. This founded 36 cis-elements in stress-inducible promoters. With the result we designed 2 synthetic promoters (BL1, BL2) for fine-controlled regulation by assembling cis-elements from the native promoters, which are expressed only under stress caused by droughts. Analysis of the transgenic plant (BL1-GUS, BL2-GUS) showed that the synthetic promoters increased the expression of β-glucuronidase (GUS) in transgenic plants under desiccation. Also in the transient activation assay demonstrated that synthetic promoters induced the co-transformation of effector DREB1A and DREB2C. These results expect that the synthetic promoter with a combination of drought-specific elements can be used to respond to various abiotic stress and is resistant to stress without causing growth retardation.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.86-94
• /
• 2005

This paper shows the results of design, analysis, manufacturing and test performed to develop the CTU(Command Telemetry Unit) EQM(Engineering Qualification Model). According to the key requirement specifications, the logics and circuits of each board are designed. In order to validate designs, some worst case, part stress, reliability, FMECA, radiation environment and launch environment analyses are performed. After manufacturing and assembling all boards, all functions of CTU EQM are verified through the functional test, environmental test and ETB test.