• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.8-9
• /
• 2019

The rebar work is a labor intensive construction work with a high labor cost ratio. It is difficult to manage the productivity, construction time, and safety of rebar work. The problem of productivity decreased in rebar construction is due to a lack of workers according to the aged workers. Partial prefabrication rebar can be an alternative solution to productivity decreased in rebar work. The characteristic of partial prefabrication method is that time consuming component such as stirrup of beam assemble in factory and others assemble in site. Therefore, in this study, the time required for each rebar assembly method is measured and analyzed to confirm the possibility of productivity improvement.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.673-674
• /
• 2011

본 논문에서는 OBS 망의 에지 라우터에서 소비되는 에너지를 절감하기 위한 통제 기반 동적 버스트 어셈블 알고리즘 (Constraint based Dynamic Burst Assemble algorithm : CDBA) 을 제안한다. 기존의 버스트 어셈블 알고리즘은 망의 성능 및 QoS (Quality of Service) 만을 고려한 고정된 버스트 어셈블 임계값을 사용하였으나 제시한 알고리즘은 에지 라우터에서 발생하는 에너지 소비율을 감소시키면서도 버스트 길이 및 패킷 지연과 같은 지표를 일정 수준이내로 유지함으로써 망의 성능을 보장한다. 제시한 알고리즘 평가를 위해 OPNET Modeler 를 사용하여 시뮬레이션을 수행하였으며, 에너지 절감율 및 패킷 지연 시간 관점에서 기존의 버스트 어셈블 알고리즘과 성능을 비교, 분석하였다.

• Polymer Science and Technology
• /
• v.16 no.6
• /
• pp.754-768
• /
• 2005

• Elastomers and Composites
• /
• v.34 no.1
• /
• pp.45-52
• /
• 1999

This paper describes how the gold particles self assemble on the specific phase on the microphase separated block copolymer thin film and form a well ordered patterns. For this study, polystyrene-polybutadiene-polystyrene (PS-PB-PS) triblock copolymer (30wt % PS) thin films (${\sim}100nm$) having a cylindrical morphology were cast from 0.1wt% toluene solution to be used as polymer thin film templates. The films having either vertical PS cylinders or in-plane PS cylinders in PB matrix from each different solvent evaporation condition were obtained. Cross-sectional transmission electron microscopy(TEM) was used to study the surface and bulk morphologies of block copolymer thin films. Small amount of gold particles was evaporated on a block copolymer thin film template to obtain a nano-scale pattern. When an as-cast thin film template was used, gold particles preferentially self assemble on the low surface tension PB phase and a relatively well ordered pattern in nano-scale was produced. However, after the formation of a low surface energy PB rich layer upon annealing, a gold self-assembled pattern was not observed.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2005.05a
• /
• pp.22-23
• /
• 2005

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.202-208
• /
• 1999

Train system like high speed train is assemble by a number of subsystem. Therefore, the Integration of train system needs the process that investigates the interface and influence between subsystems. In this paper, It studied the Design & Integration and major process of Korea High Speed Tram Project,

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.9
• /
• pp.44-51
• /
• 2007

There are many methods to assemble various parts of a product, and one of them is the bolting system widely used in a industrial field due to the merits; easiness to obtain strong tightening force, simplicity of assemble or disassemble in order to repair, substitution or cleaning, and so on. But this bolting system needs attachments not to let a bolt loose and they are an important factor to cost a great deal. In this study, some equations are suggested and FE analyses are carried out to verify the cause of the bolt looseness occurring in the tightening process. And because the number of bolts in the bolting system has been decided by empirical know-how of designers in the field, safety rate in the plate type heat exchanger is often too high. Therefore the equations to decrease in quantity are suggested in consideration of the relationship between a critical shearing force acting on the screw and a normal force acting on the cooling plate by the working fluid.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1655-1658
• /
• 2006

The solution of $[Ru(phen)_2(dppz)]^{2+}$ and SDS has high Resonance Light Scattering (RLS) signals due to $[Ru(phen)_2(dppz)]^{2+}$ assemble on the surface of the SDS micelle. Because of the high affinity ($KB\geq10^6\;L\;mol^{-1}$) between $[Ru(phen)_2(dppz)]^{2+}$ and DNA, the adding of DNA in the solution of $[Ru(phen)_2(dppz)]^{2+}$-SDS makes the dissociation of $[Ru(phen)_2(dppz)]^{2+}$-SDS, and results in decreasing of the RLS signals and increasing of the absorbance. Based on this, a novel method is proposed for DNA assay. Under optimum condition, good linear relationship was obtained within the concentration range of 0.018-1.26 $\mu g\;mL^{-1}$, the linear equation is $I_{RLS}$ = 504.8-348.8 c (c: $\mu g\;mL^{-1}$) and the correlation coefficient (r) is 0.9992. The detect limit for calf thymus DNA is 8.6 ng $mL^{-1}$. The proposed method was successful applied to determine the extracted colibacillus plasmid DNA.

• Journal of the Korean Ceramic Society
• /
• v.51 no.3
• /
• pp.218-223
• /
• 2014

The domain structures, dielectric properties, and phase transformation of (001)-oriented $Pb(Mg_{1/3}Nb_{2/3})O_3-x%PbTiO_3$ (PMN-x%PT) crystals for x=20, 30, 35, and 40 mole% have been investigated. PMN-20%PT consists of polar nano-domains (PND) which do not self-assemble into macro-domain plates. PMN-30%PT consists of PNDs which begin to self-assemble into colonies along preferred {110} planes. PMN-35PT consists of miniature polar domains on the nm scale. PMN-40%PT consists of {001} oriented lamella domains on the mm scale that have internal nano-scale heterogeneities. The dielectric properties of poled (001) PMN-x%PT single crystals have been measured for orientations both parallel and perpendicular to the [001] poling direction. The results of the temperature dependence of the dielectric constant and mesh scans for the 30%PT sample demonstrate that the initial monoclinic phase changes to single domain tetragonal phase and to cubic phase with increasing temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.269-273
• /
• 2001

W fabricated thin film using Na$_{0.5}$K$_{0.5}$NbO$_3$ volatile material by pulsed laser deposition (PLD) and studied characterization from EM, XRD, P-E. The density and scale of droplet, which is the defect of PLD, was investigated by SEM but large droplet was not found. The degree of assemble oriented C-axis measured with X-ray diffraction suggests that this film oriented C-axis achieved by $\theta$-2$\theta$ scan and rocking curves shows good self-assemble phenomenon, finally $\phi$-scan does that all of the four directions of the lattice in film equals to those of substrate. P-E hysteresis loop shows residual remnant polarization or saturation polarization value, but it is applicable to memories.ies.