• 물과 미래
• /
• 제28권2호
• /
• pp.137-143
• /
• 1995

해안 대수층 내에서 담수와 해수 사이에 형성되는 확산대의 위치와 형태는 많은 변수들에 의하여 영향을 받는다. 현재까지 수행된 많은 연구는 확산대들의 정성적 비교로 국한되었다. 본 연구에서는 정량적 분석을 위하여 확산대 특성(최대 침투 길이, 두께, 성층 정도)을 계량화하고 수치 모형을 이용하여 주요 변수(유속과 확산지수)가 확산대 특성에 미치는 영향을 고찰하였다. 차원해석을 통하여 정리된 실험 결과는 유속과 확산지수가 확산대의 특성에 미치는 영향을 명확히 규명하였다. 유속의 증가는 확산계수를 증가시키기 때문에 확산대가 팽창한다는 일부의 주장과는 달리 확산대는 축소하는 것으로 밝혀졌다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.9-9
• /
• 2011

The transfer of nano-science accomplishments into technology is severely hindered by a lack of understanding of barriers to nanoscale manufacturing. The NSF Center for High-rate Nanomanufacturing (CHN) is developing tools and processes to conduct fast massive directed assembly of nanoscale elements by controlling the forces required to assemble, detach, and transfer nanoelements at high rates and over large areas. The center has developed templates with nanofeatures to direct the assembly of carbon nanotubes and nanoparticles (down to 10 nm) into nanoscale trenches in a short time (in seconds) and over a large area (measured in inches). The center has demonstrated that nanotemplates can be used to pattern conducting polymers and that the patterned polymer can be transferred onto a second polymer substrate. Recently, a fast and highly scalable process for fabricating interconnects from CMOS and other types of interconnects has been developed using metallic nanoparticles. The particles are precisely assembled into the vias from the suspension and then fused in a room temperature process creating nanoscale interconnect. The center has many applications where the technology has been demonstrated. For example, the nonvolatile memory switches using (SWNTs) or molecules assembled on a wafer level. A new biosensor chip (0.02 $mm^2$) capable of detecting multiple biomarkers simultaneously and can be in vitro and in vivo with a detection limit that's 200 times lower than current technology. The center has developed the fundamental science and engineering platform necessary to manufacture a wide array of applications ranging from electronics, energy, and materials to biotechnology.

• 한국통신학회논문지
• /
• 제36권5B호
• /
• pp.484-489
• /
• 2011

우리나라 IT중소기업은 대부분 핵심적인 기술을 가진 기업에게 부품을 수급받고, 이를 조립하여 대기업에 납품하는 기업이 많다. IT 중소기업의 현실적인 지적재산관련 문제는 직접적인 소송 혹은 클레임의 문제가 아니라 계약상의 제 3자 지적재산 침해문제 혹은 계약이 없을 경우에는 각 준거법상의 묵시적 손해배상 책임의 문제이나, IT중소기업의 협상력이 크지 않기 때문에 계약상에 명시적인 보증조항을 삽입할 수 없고, 각 준거법상으로도 소송의 경제성이 없는 경우가 많아서 실효성이 없기 때문에 이에 대해서 정부기관 및 산하 연구기관에서 연구을 하여 개선안을 도출해야한다고 생각된다.

• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1258-1262
• /
• 2011

A new organogelator, L-Alanine dihydrazide derivative can self-assemble in various organic solvents and turned them into thermally reversible physical supramolecular organogels at extremely low concentrations (< 2 wt %). The gel-sol phase transition temperatures ($T_{GS}$) were determined as a function of gelator concentration and the corresponding enthalpies (${\Delta}H_g$) were extracted. Scanning electron microscopy (SEM) measurements revealed that the interspaces of fiber-like network structures were diminished with the increasing of the LMOG concentration. FT-IR spectroscopy studies revealed that hydrogen-bonding and hydrophobic interaction were the driving forces for the formation of the gels. Based on the data of XRD and molecular modeling, the possible packing modes for the formation of organogelator aggregates were proposed.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권3호
• /
• pp.148-156
• /
• 2015

Deck plates of ships or offshore structures would make out-of-plane distortion for their thin thickness. These distortions are usually straightened by thermal straightening such as flame heating method. After thermal straightening, the blocks are lifted and moved by cranes to assemble it at dry-dock stage. After this lifting process, out-of-plane deformation again happens frequently. And then, they continuously cause quality and accuracy problems in the final dry-dock process. So, it takes more time for repair and correction working. According to preceding research, the lifting process by cranes would offset the effect on thermal straightening. The target of this study is to develop a methodology analyzing the remaining efficiency of thermal straightening after block lifting. The development was based on the assumption of yield state at straightening region. Therefore the remaining efficiency was obtained by different stiffness slope while lifting & relieving. The efficiency formula was designed using inherent strain, and we made a table of zero-efficiency by cooling speed and class rule's steels. As a result, if the stress orthogonal to straightened line is calculated during lifting analysis by FEA, the efficiency can be obtained linearly to the values in the table. Finally, even optimized carling position can be designed by considering the regional data from series project and welding region on deck.

• 한국미생물·생명공학회지
• /
• 제25권6호
• /
• pp.560-565
• /
• 1997

DNA fragment assembly is a major concem in shot-gun DNA sequencing project. It is to reconstruct a consensus DNA sequence from a collection of random oritented fragments. We developed a computer program that is useful for DNA fragment assembly. Inputs to the program are DNA fragment sequences including IUB-IUPAC bases. The program produces the most probable reconstruction ot the original DNA sequence as a text format or a PostScript format. The program consists of four phases: the first phase quickly eliminates fragment pairs that can not possibly overlap. In the second phase, the quality of overlap between each pair is calculated to a score. In the third phase, overlap pairs are sorted by their scores and consistency of the overlaps is checked. The last phase determines consensus sequences and displays them. The performance of fragment assembly program was tested on a set of DNA fragment sequences which were generated from long DNA sequences of GenBank by a fragmentation program.

• Journal of Microbiology and Biotechnology
• /
• 제24권9호
• /
• pp.1178-1188
• /
• 2014

In this study, the yeast Pichia pastoris was genetically modified to assemble minicellulosomes on its cell surface by the heterologous expression of a truncated scaffoldin CipA from Clostridium acetobutylicum. Fluorescence microscopy and western blot analysis confirmed that CipA was targeted to the yeast cell surface and that NtEGD, the Nasutitermes takasagoensis endoglucanase that was fused with dockerin, interacted with CipA on the yeast cell surface, suggesting that the cohesin and dockerin domains and cellulose-binding module of C. acetobutylicum were functional in the yeasts. The enzymatic activities of the cellulases in the minicellulosomes that were displayed on the yeast cell surfaces increased dramatically following interaction with the cohesin-dockerin domains. Additionally, the hydrolysis efficiencies of NtEGD for carboxymethyl cellulose, microcrystal cellulose, and filter paper increased up to 1.4-fold, 2.0-fold, and 3.2-fold, respectively. To the best of our knowledge, this is the first report describing the expression of C. acetobutylicum minicellulosomes in yeast and the incorporation of animal cellulases into cellulosomes. This strategy of heterologous cellulase incorporation lends novel insight into the process of cellulosome assembly. Potentially, the surface display of cellulosomes, such as that reported in this study, may be utilized in the engineering of S. cerevisiae for ethanol production from cellulose and additional future applications.

• Steel and Composite Structures
• /
• 제24권1호
• /
• pp.23-35
• /
• 2017

Current form of Corrugated-strip connectors are not popular due to the fact that the two ends of this form need to be welded to steel face plates. To overcome this difficulty, a new system is proposed in this work. In this system, bi-directional corrugated-strip connectors are used in pairs, and only one of their ends is welded to the steel face plates on each side. The other end is embedded in the concrete core. To assemble the system, common welding devices are required, and welding process can be performed in the construction sites. By performing the Push-out test under static loading, the authors experimentally assess the effects of geometric parameters on ductility, failure modes and the ultimate shear strength of the aforesaid connectors. For this purpose, sixteen experimental samples are prepared and investigated. For fifteen of these samples, one end of the shear connectors is welded to steel face plates, and the other end is embedded in the concrete. Another experimental sample is prepared in which both ends are welded to the steel face plates. According to the achieved results, several relations are proposed for predicting the ultimate shear strength and load vs. interlayer slip (load-slip) behavior of corrugated-strip connectors. Moreover, these formulas are compared with those of the well-known codes and standards. Accordingly, it is concluded that the authors' relations are more reliable.

• 로봇학회논문지
• /
• 제6권1호
• /
• pp.10-17
• /
• 2011

This paper deals with researching and designing the fastening parts to be used in order to assemble various Teaching Aids Robots (or Hands-on Robots) with originally incompatible parts supplied by different manufacturers. The suggested fastening parts provide the compatibility among Teaching Aids Robots even though the educational robot customers use incompatible parts from different companies. The designed fastening parts are classified into four set groups such as frame set, sliding-bar set, connector set, and set of chuck and rivet/bolt. Each set of the fastening parts reflects the needs collected from the users, and then some portion of new idea has been added to implement the needs. In this paper, the examples of the Teaching Aids Robots which are assembled with both commercial parts and the designed parts are presented in order to evaluate the compatibility and usability of the suggested fastening parts. As a result, both compatibility and usability of the fastening parts suggested in this paper were proved. The designed fastening parts have been distributed to more than 100 elementary schools nationwide.

• Journal of Ship and Ocean Technology
• /
• 제10권2호
• /
• pp.37-44
• /
• 2006

The erection in shipbuilding is the process to assemble all the blocks one by one in certain order and requires more leveled and efficient schedule than other processes do. However, erection schedule includes too many constraints to be systemized with simple programs and constraints are changed frequently. These difficulties make it rare to find automatic erection schedule generation system with load leveling ability. In this paper, a CSP (Constraint Satisfaction Problem)-based load leveling algorithm using a maximum load diminution technique is proposed and applied to the block erection scheduling of a dock in a shipyard. The result shows that it performs better than currently used scheduling method based on empirical logics. The maximum load of welding length and crane usage are reduced by 31.63% and 30.00% respectively. The deviation of resource usage amount also decreases by 8.93% and 7.51%.