• Title/Summary/Keyword: Ash3D

Search Result 368, Processing Time 0.019 seconds

Assessment of Controlled Low Strength Material using Pond Ash for Pipe Backfill Materials (매립석탄재 활용 CLSM의 관 뒤채움재 적용성 평가)

  • Young-Wook Kim;Young-Cheol Lim;Doo-Bong Yeon
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.11 no.1
    • /
    • pp.32-38
    • /
    • 2023
  • In this study, as part of the practical development of technology for CLSM using pond ash, the characteristics such as flowability, bleeding rate, and strength of the CLSM according to physical properties such as particle size distribution and particulate content of the pond ash were reviewed. As a result of analyzing the properties of the collected pond ash, it was found that the characteristics of density and particle size distribution were different. As a result of evaluating the characteristics of the CLSM for three types of pond ash, it was found that the blending conditions to satisfy the quality stipulated in ACI 229R were different, and mainly affected the particle size distribution characteristics and particulate content of the pond ash. In case of coarse-grained pond ash (PA-3), mixing conditions that satisfy the performance requirements stipulated in ACI 229R were not derived. But it is considered that further review is necessary according to particle size adjustment.

An Experimental Study on the Engineering Properties of Concrete according to W/C and Replacement Ratio of Bottom Ash (물-시멘트비 및 바텀애쉬 대체율에 따른 콘크리트의 공학적 특성에 관한 실험적 연구)

  • Choi, Se-Jin;Jeong, Yong;Oh, Bok-Jin;Kim, Moo-Han
    • Journal of the Korea Concrete Institute
    • /
    • v.15 no.6
    • /
    • pp.840-847
    • /
    • 2003
  • Recently, the coal-ash production has been increased by increase of consumption of electric power. So it is important to secure a reclaimed land and treatment utility for coal-ash. This is an experimental study to compare and analyze the engineering properties of concrete according to W/C and replacement ratio of bottom ash. For this purpose, the mix proportions of concrete according to W/C(40, 50, 60%) and replacement ratio of bottom ash(0, 10, 20, 35, 50%) were established, and then tested for slump, chloride content, setting time, bleeding content, compressive strength. Also the durability test of concrete with W/E 60% was performed. According to test results, it was found that the bleeding content of concrete decreased as the replacement ratio of bottom ash increased. And the chloride content of concrete using the bottom ash increased as the replacement ratio of bottom ash increased, but it is satisfied with the chloride content of fresh concrete $0.30kg/m^3$ below("concrete standard specification" regulation value). The compressive strength of concrete using the bottom ash was similar to that of BA0 concrete after 28 days of curing and the carbonation depth of concrete was increased according to increase of the replacement ratio of bottom ash.

Prediction of Carcass Fat, Protein, and Energy Content from Carcass Dry Matter and Specific Gravity of Broilers

  • Wiernusz, C.J.;Park, B.C.;Teeter, R.G.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.12 no.1
    • /
    • pp.42-48
    • /
    • 1999
  • Three experiments were conducted to develop and test equations for predicting carcass composition. In the first study using 52 d-old Cobb ${\times}$ Cobb male broilers, twenty four carcasses were selected from 325 processed birds based upon visual appraisal for abdominal fat (low, medium, high) and assayed for specific gravity (SG), dry matter (DM), fat, protein, and ash. In experiment 2, 120 birds were fed rations containing 2 caloric densities (2,880 and $3,200kcal\;ME_n/kg$ diet) and assayed as described above on weeks 2,3,4,5, and 6. Carcass fat was elevated (p < 0.05) with increased caloric density. In both studies predictive variables were significantly correlated with chemically determined carcass fat, protein, and ash contents. Pooled across the 2 studies, data were used to form SG, DM, and or age based equations for predicting carcass composition. Results were tested in experiment 3, where 576 birds reared to 49-d consumed either 2,880, 3,200, or $3,574kcal\;ME_n/kg$ diet while exposed to constant $24^{\circ}C$ or cycling 24 to $35^{\circ}C$ ambient temperatures. Both dietary and environmental effects impacted (p < 0.05) carcass composition. The fat content analyzed chemically was enhanced from 12.4 to 15.7%, and predicted fat was also elevated from 13.4 to 14.8% with increasing caloric density. Heat distress reduced (p < 0.05) analyzed carcass protein (18.9 vs 18.3%) and predicted protein (18.2 vs 17.5%). Predicted equation values for carcass fat, protein, ash, and energy were correlated with the chemically analyzed values at r=0.96, 0.77, 0.86, and 0.79, respectively. Results suggest that prediction equations based on DM and SG may be used to estimate carcass fat, protein, ash, and energy contents of broilers consuming diets that differ in caloric density (2,800 to $3,574kcal\;ME_n/kg$) and for broilers exposed to either constant ($24^{\circ}C$) or cycling high (24 to $35^{\circ}C$) ambient temperatures during 49-d rearing period tested in the present study.

Easy-to-execute 'One-pot' Synthesis of 1,2,4,5-Tetrazines Catalyzed by Activated Fly Ash (활성화된 비산회 촉매를 이용하여 간단히 수행된 1,2,4,5-Tetrazines의 One-pot 합성)

  • Gopalakrishnan, M.;Thanusu, J.;Kanagarajan, V.
    • Journal of the Korean Chemical Society
    • /
    • v.51 no.6
    • /
    • pp.520-525
    • /
    • 2007
  • Three-component coupling of thiourea/urea, various structurally diverse aromatic aldehydes and ammonium acetate is catalyzed by activated fly ash in dry media under microwave irradiation to give 6-aryl-1,2,4,5-tetrazinan- 3-thiones/ones in good yields. The structure of 6-aryl-1,2,4,5-tetrazinan-3-thiones/ones have been elucidated on the basis of their melting points, elemental analysis, MS, IR, 1H NMR, D2O exchange, 13C NMR and two dimensional NMR spectral studies including Homonuclear Correlation (HOMOCOR) and Heteronuclear Single Quantum Correlation (HSQC) spectra.

Selective Leaching of Zinc from Zinc Oxide Waste and Preparation of Zinc Oxide (유기추출제를 이용한 산화아연 페기물로부터 아연의 선별 침출 및 산화아연 제조)

  • 주창식;천재기
    • Journal of Environmental Science International
    • /
    • v.7 no.3
    • /
    • pp.401-408
    • /
    • 1998
  • An experimental research was preformed for the development of an effective process for zinc oxide waste(zinc ash) reuse. Zinc was selectively leached from zinc ash by 30 vol.% D2EHPA In kerosine solution, and the leaching velocity was quite fast. Zinc leached was stripped by sulfuric acid solutions, and the amount of zinc stripped was linearly Increased with the amount of sulfuric acid used. Zinc oxide fine particles were obtained by dropwise adding of sodium hydroxide solution to the resultant aqueous zinc solution at 85$^{\circ}C$.

  • PDF

Understanding Impact of the Volcanic Eruption of Nishinoshima, Japan on Air Quality in the South Korean Peninsula (일본 니시노시마 화산 분화에 의한 한반도 남부 대기질 영향 분석)

  • Cheolwoo Chang;Sung-Hyo Yun
    • Journal of the Korean earth science society
    • /
    • v.44 no.3
    • /
    • pp.196-209
    • /
    • 2023
  • The Nishinoshima volcano, located 940 km south of Tokyo, experienced an eruption from June to August 2020. The volcanic gas and ash from the eruption of Nishinoshima that occurred at the end of July 2020 was reported to have the potential to affect the Korean Peninsula. In this study, we used Ash3D, a numerical simulation program for volcanic ash dispersion, to investigate the eruption that occurred at 0:00 local time on July 28, 2020, with a volcanic explosivity index of three. The results showed that the volcanic ash cloud reached Okinawa on the morning of July 30, carried by an east wind. It then moved northward and reached Jeju Island on August 1, eventually circulating in a clockwise direction and reaching southern part of the Korean Peninsula on August 2. The concentration of Particulate Matter 10 (PM10), measured at the Jeju Gosan Meteorological Observatory in Jeju Island, increase from August 1. A similar increase in PM10 concentration was observed at the Gudeok Mountain Weather Station in Busan from August 2. These findings suggested that eruption of the Nishinoshima volcano had an impact on the fine dust concentrations at Jeju Island and southern part of the Korean Peninsula.

A Study on Changes in High-Temperature Microstructure of Coal Ash Applied as Cement Clinker Raw Material (시멘트 클링커 원료로서 적용한 석탄재의 고온 미세구조 변화 고찰)

  • Yoo, Dong-Woo;Im, Young-Jin;Kwon, Sung-Ku;Lee, Seok-Je
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.10 no.3
    • /
    • pp.211-218
    • /
    • 2022
  • Coal ash is being considered as a source of silica and alumina for cement clinker. The purpose of this study was to investigate the effect on cement clinker sintering by confirming the high-temperature microstructural change according to the firing temperature in the cement clinker sintering process of coal ash. In the coal ash used as a raw material for cement clinker, the shape change of the particle surface was confirmed from the sintering tem perature of 950 ℃. The shape of the coal ash disappeared from the sintering temperature higher than 1250 ℃. It was confirmed that the Al and Fe components of the coal ash were converted to the cement interstitial phase at a temperature higher than 1350 ℃. In addition, the clinker using a large amount of coal ash as a raw material showed a low content of Lime and a high content of Belite in the sintering tem perature range of 1150~1200 ℃. From this, it was confirmed that the formation of calcium silicate mineral proceeds more easily at the initial sintering temperature by the application of coal ash.

Developing Interactive Simulator for Predicting Volcanic Ash (실시간 대화형 화산재 확산 예측 시스템 개발)

  • Kim, Hae-Dong;Lee, Ho-Man
    • Journal of Environmental Science International
    • /
    • v.23 no.3
    • /
    • pp.527-532
    • /
    • 2014
  • According to the analysis of volcanic observation data around Korean peninsula, the activities of volcano increase continuously. For example, the volcanic eruption of Mt. Sakurajima is an example, and Mt. Baekdu can be another example potentially. In these regards, developing unified system including realtime prediction and 3D visualization of volcano ash are important to prepare the volcanic disaster systematically. In this technical report, an interactive simulator embedding dispersion algorithm and 3D visualization engine is developed. This system can contribute to the realtime prediction of volcanic disaster scientifically.

Bloating mechanism of artificial lightweight aggregate with reject ash (잔사회를 이용한 인공경량골재의 발포기구)

  • Lee, Ki-Gang
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.22 no.3
    • /
    • pp.158-163
    • /
    • 2012
  • The purpose of this study is to improve recycling rate of the coal reject ash by investigating bloating mechanism for artificial lightweight aggregate of reject ash. In this study, we use reject ash (R/A) and dredged soil (D/S) as raw materials. The artificial lightweight aggregates were formed by plastic forming (${\phi}$ = 10 mm) and sintered by temperature raising method at different temperatures (between 1200 and $1275^{\circ}C$). The physical properties of the aggregates such as bulk specific gravity, adsorption and microstructure of surface and cross-section are investigated with the sintering temperature and rate of R/A-D/S contents. As the result of the bulk specific gravity graphs, we can found out the inflection point at content of R/A 80 wt.%. From the microstructure images, we considered the artificial lightweight aggregates content of R/A over 80 wt.% are distributed numerous uniform micro-pores by vitrification without Black Core and the artificial lightweight aggregates of R/A below 80wt.% are distributed macro-pores with Black Core.

Recycling and characterization of bone incorporated with concrete for gamma-radiation shielding applications

  • U. Rilwan;G.M. Aliyu;S.F. Olukotun;M.M. Idris;A.A. Mundi;S. Bello;I. Umar;A. El-Taher;K.A. Mahmoud;M.I. sayyed
    • Nuclear Engineering and Technology
    • /
    • v.56 no.7
    • /
    • pp.2828-2834
    • /
    • 2024
  • This research intends to recycle bone and incorporate it into concrete for radiation shielding application using Phy-X/PSD software. Cement, sand and granite were mixed in proportion of 0.5 kg:1 kg:1 kg to obtain sample A. Other concretes composing of cement, sand, granite and bone ash was in proportion 0.45 kg:1 kg:1 kg:0.05 kg, 0.1 kg:1 kg:1 kg:0.4 kg and 0.35 kg:1 kg:1 kg:0.15 kg to obtain samples B, C and D respectively. 0.5 water-to-cement (W/C) ratio was adopted throughout the mixes because the control mix contain the normal water quantity for normal hydration of cement. Replacing the bone ash for the cement in the fabricated concretes enhances their densities where the fabricated concretes' density decreased from 2.33 g/cm3 to 2.22 g/cm3 by raising the reinforcing bones fly ash concentration from 0 to 0.15 kg. Additionally, increasing the bones fly ash concentration within the fabricated concretes increases their linear attenuation coefficient (LAC) where the fabricated concretes' μ values at 0.662 MeV reach 0.181 cm-1, 0.178 cm-1, 0.174 cm-1, and 0.171 cm-1, respectively for concretes A, B, C, and D. The use of other local materials is recommended, as it improves waste management being the major aim of the sustainable development goal.