• International Journal of Concrete Structures and Materials
• /
• 제8권3호
• /
• pp.251-258
• /
• 2014

The use of sustainable technologies such as supplementary cementitious materials, and/or recycled post-consumer environmental wastes is widely used in concrete industry in the last decade. This paper presents the results of a laboratory investigation of normal concrete containing sustainable technologies. Twenty one mixtures (21) were prepared with different combinations of silica fume, fly ash, olive's seed ash, and corncob ash (CCA). Fresh and hardened concrete properties were measured, as expected the inclusion of the sustainable technologies affected both fresh and hardened concrete properties. Based on the results obtained in this study and the analyses conducted, the following observations were drawn: replacing the cement by olive's seed ash or CCA has a significant effect on fresh concrete workability. Olive's seed ash increased the slump by more than 200 % compared to the control mixtures. The compressive strength of mixtures containing olive's seed ash showed by 45 and 75 % decrease compared to the control mixtures. The 28 days compressive strength of mixtures produced by CCA of 10 % replacement decreased by 41 % compared to the control mixture.

• Carbon letters
• /
• 제11권1호
• /
• pp.1-8
• /
• 2010

The adsorption of Acid Blue 92 onto three low cost and ecofriendly biosorbents viz., cow dung ash, mango stone ash and parthenium leaves ash and commercial activated carbon have discussed in this work. The ash of all the mentioned bio-wastes was prepared in the muffle furnace at $500^{\circ}C$ and all the adsorbents were stored in an air thermostat. Experiments at total dye concentrations of 10~100 mg/L were carried out with a synthetic effluent prepared in the laboratory. The parameters such as pH and dye concentration were varied. Equilibrium adsorption data followed both Langmuir and Freundlich isotherms. The results indicate that cow dung ash, mango stone ash and parthenium leaves ash could be employed as low-cost alternatives to commercial activated carbon in wastewater treatment for the removal of dye.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권2호
• /
• pp.97-101
• /
• 2022

In this study we investigated the gas to solid heat transfer of bubbling fluidized bed bottom ash cooler installed at the Donghae power plant in South Korea. Several different analyses are done through 1-D calculations and 3-D CFD simulation to predict the bottom ash exit temperatures when it exits the ash cooler. Three different cases are set up to have consideration of unburnt carbon in the bottom ash. Sensible heat comparison and heat transfer calculation between the fluidization air and the bottom ash are conducted and 3-D CFD analysis is done on three cases. We have obtained the results that the bottom ash with unburnt carbon is exiting the ash cooler, exceeding the targeted temperature from both 1-D calculation and 3-D CFD simulation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.90-91
• /
• 2020

Utilization of upgraded fine fly ash in cement-based materials has been proved by many researchers as an effective method to improve compressive strength of cement based materials at early ages. The addition of fine fly ash has introduced dilution effect, enhanced pozzolanic reaction effect, nucleation effect and physical filling effect into cement-fly ash system. In this study, an integrated reaction model is adpoted to quantify the contributions from cement hydration and pozzolanic reaction to compressive strength. A modified model related to the physical filling effect is utilized to calculate the compressive strength increment considering the gradual dissolution of fly ash particles. Via combination of these two parts, a numerical model has been proposed to predict the compressive strength development of fine fly ash mortar considering fly ash fineness. The reliability of the model is validated through good agreement with the experimental results from previous articles.

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.804-812
• /
• 2001

A triboelectrostatic separation system for removing unburned carbon from coal fly ash is designed and evaluated. Fly ash from a coal-fired power plant is used as an accepted additive in concrete where it adds strength, sulfate resistance and reduced cost, provided acceptable levels of unburned carbon are maintained. Unfortunately, unburned carbon in coal fly ash absorbs some of other additives and reduces the concrete strength. This paper describes to investigate dry triboelectrostatic process to separate unburned carbon from coal fly ash and utilize it into economically valuable products. The laboratory-scale triboelectrostatic separation system consists of a particle feeding system, a tribocharger, a separation chamber, and collection systems. Particles of unburned carbon and fly ash can be imparted positive and negative surface charges, respectively, with a copper tribocharger due to differences in the work function values of the particles and the tribocharger, and can be separated by passing them through an external electric field. Results showed that fly ash recovery was strongly dependent on the electric field strength and the particle size. 70wt% of fly ash containing 6.5wt% of carbon contents could be recovered at carbon contents below 3%. The triboelectrostatic separation system showed a potential to be an effective method for removing unburned carbon from coal fly ash.

• 펄프종이기술
• /
• 제44권5호
• /
• pp.80-86
• /
• 2012

The disposal of the bottom ash originated from a thermoelectric power plant which used the pulverized coal, has been an important issue of the power plants. In order to find the possible way of recycling of the bottom ash, the applicability of the bottom ash as an inorganic filler for paper making was investigated in this study. The pretreatment with acid were applied for upgrading the properties of bottom ash. The effects of the addition of the bottom ash to the different pulp stocks, Sw-BKP, DIP(Deinked Pulp), Sw-UBKP were evaluated in terms of the change in paper properties. The brightness and tensile strength decreased as the increase of the amount of the bottom ash addition. The bulk and the opacity were increased by the addition of bottom ash. The pretreatment of bottom ash resulted in the increase of improvement of the brightness and the strength properties comparing with those of untreated bottom ash.

• 한국농공학회논문집
• /
• 제55권2호
• /
• pp.77-85
• /
• 2013

The aim of this study is to investigate strength and water purification characteristics of effective microorganism-applied volcanic ash block using flexural strength test and water quality analysis. The specimens were prepared with volcanic ash from Mt. Baekdusan and Mt. Hallasan, and cement as the ratios of 3.5:1, 4.0:1, 4.5:1, 5.0:1 with and without metakaolin. Flexural strength degraded with increasing of the amount of volcanic ash, and increased with addition of metakaolin as a binder. Based on these results, the optimal ratio for fabricating volcanic ash-cement mixture block is determined as 3.5:1 with metakaolin. Furthermore, from water quality analysis on contaminated water, removal ability of effective microorganism-applied volcanic ash-cement mixture block and caged volcanic ash block against T-N, T-P and SS was highly evaluated because of adsorption due to the large specific surface area of volcanic ash. Hence, volcanic ash-cement mixture block and caged volcanic ash block possibly contribute to water purification.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.27-35
• /
• 2013

SCR (Selective Catalytic Reduction) on DPF (Diesel Particulate Filter) is a multi-functional after-treatment device which integrates soot filtration and DeNOx function into a single can. Because of its advantage in package and cost, the SCR on DPF is considered as a potential candidate for future application. It inherently employes wall flow type monolithic reactor so ash included in exhaust gas may deposit inside the inlet channel of this device. This study is intended to identify the impact of ash deposit on SCR reaction under wall flow type monolithic reactor. Simulation approach is used so relevant species transport equations for wall flow type monolith is derived. These equations can be solved together with momentum conservation equations and give solution for conversion performance. Both ash deposit and clean catalyst case are simulated and comparison of these two cases gives an insight for the impact of ash deposit on conversion performance. Ash deposit can be classified as ash layer and ash plug. and impact of ash deposit is described along with different morphology of ash deposit.

• 한국축산시설환경학회지
• /
• 제5권1호
• /
• pp.63-72
• /
• 1999

This study was carried out to improve utilization of fly ash. Each animal waste was mixed with fly ash and composted This compost used at forage crops with corn, rye and alfalfa to examine to examine the fertilized efficiency and investigated productivity of forage crops, composition of this copmost and effect of fly ash on soil characteristics and composition. Content of organic matte, P2O5, K2O, CaO, MgO, Mn and B at the soil, which is given fly ash, increased. After the test crops were harvested, pH of the soil was maintained about 7 and contents of organic matter, phosphoric aicd, K, Mg, and B was increased at the soil of used fly ash. As fly ash was mixed, each DM yield of corn and rye was increased 10∼13% and 14∼21% especially alfalfa was increased 35% at the soil which is mixed fly ash with cage layer manure. As fly ash was mixed, each Crude protein (CP) of corn and rye was increased 6∼17% and about 29%, especially, as fly and cage layer manure was mixed CP of alfalfa was increased 33%. In conclusion, as fly ash is mixed with anlmal waste and use at forage crops, It makes the soil good and improve the productivity of forage crops.

• 한국축산시설환경학회지
• /
• 제5권1호
• /
• pp.37-44
• /
• 1999

This study was carried out to improve utilization of substitute fly-ash in bedding material of animal waste treatments. The amount used of fly-ash used in a pigpen or beef stall was 50% lower than that of existing bedding material of animal waste treatments. From the results, substitution effect of fly-ash put over the floor of the stable became much better. Effects of processed fly ash as a spread straw decreased ammonia(NH3) and Hydrogensulfide (H2S) gas at beef stall, but there was no benefit of replacement terms. Effect of processed fly ash as a spread straw increased 4∼5 times replacement terms more than control NH3 and H2S gas was decreased. A lot of maggots and porasites were grown at sawdust pig farm, but fly ash inhibited to grow maggots and paraeters. In conclusion, as substituting fly-ash for 5% sawdust(DM basis) in making animal waste into a compost with fly ash, we can reduce the sawdust purchasing costs and produce the high quality of a compost, especially a pollutant as NH3 and H2S gas, etc. from the process of biodegradation, and as substituting fly-ash(1,540 won per ton ; can be extended the replacement period of spreading straw approximatively 4∼5 times) for sawdusts(111,000 won per ton) will increase a real income in livestock house.