• Child Health Nursing Research
• /
• v.10 no.1
• /
• pp.22-28
• /
• 2004

Purpose: The purpose of this study was to identify the effect of hand acupuncture on reduction of headache. Method: This study used a quasi-experimental pre-test and post-test design. 45 middle school girls who complained of headache were selected as subjects. The study lasted from November 2002 to June 2003. There were 22 girls in the experimental group while 23 girls were control group; convenience assignment was used. The two groups were homogeneous on characteristics. The experimental group received hand acupuncture. The treatment was to puncture corresponding points (A33, B27, M1, I2) on both the palm and the back of a hand with disposable acupuncture needles, and then remove them after a 20-30 minutes recess during which the subjects reclined on a bed. The data were analyzed using the SPSS PC with Fisher's Exact -test, and Mann Whitney U-test. Result: The results of this study were as follows: 1) In the experimental group, objective pain decreased after hand acupuncture (U= -2.51, p= .01). As for the objective pain degree, a significant reduction in voice change was observed in the experimental groups (U= -2.35, p= .02). Facial expressional changes were observed (U= -1.87, p= .06) and perspiration degree (U= -.99, p= .32) has reduced. However, these differences were not statistically significant between the experimental and control group. 2) Subjective pain degree decreased after hand acupuncture in the experimental as compared to the control group. 3) No statistical significant difference in comfort (U= -.29, p= .78) or distress (U= -1.51, p= .13) between experimental and control group were found. Conclusion: These findings indicate that hand acupuncture is an effective method for reducing headache. Therefore, hand acupuncture can be considered as an independent nursing intervention for headache reduction.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.1
• /
• pp.61-72
• /
• 1999

The present study experimentally investigated the effect of refrigeration lubricant on the heat transfer performance in the straight sections and U-bend of a microfin tube evaporator by using R-22/mineral oil and R-407C/POE oil. The apparatus consisted of test section with U-bend, preheater, condenser, oil injection and sampling devices, magnetic pump, mass flow meter etc. The experimental parameters were oil concentration of 0 to 5 wt%, inlet quality of 0.1 to 0.5, mass flux of 219 and $400kg/m^2s$ and heat flux of 10 and $20kW/m^2$. The effects of parameters on the heat transfer coefficients were large in the order of inlet quality, mass flux and heat flux as oil concentration got increased. As oil concentration was increased, heat transfer coefficients were continuously decreased for R-22 and increased by 3% up to the concentration of 1% and then decreased for R-407C under the condition of large inlet quality, and small mass flux and heat flux. But, the heat transfer coefficients were increased up to the concentration of 3% and then decreased for both R-22 and R-407C refrigerants under the opposite conditions. The variation of enhancement factors for R-407C was under 50% of that for R-22 and the variation with respect to the positions in the test section was small. The pressure drops were increased for both R-22 and R-407C refrigerants as oil concentration was increased. The pressure drops for R-407C were smaller by the maximum of 18% than those for R-22.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.87-97
• /
• 2014

City is currently developing into intelligent city which adopts the ICT technology to resolve the problems and increase the competitiveness. This intelligent city is promoted under the name of U-City or Smart City, yet it is also criticized in the trend for what the differences between U-City and Smart City are. In this study, we draws the differences between U-City and Smart City from our distinctive research method, text mining which analyzes the trend of research papers, and contribute to direction of U-City study in the future. Through this analysis, the study results in that U-City focuses practical implementation in domestic cities while Smart City focuses technological development and provision of single service. However, this paper has a limitation as the subjective opinion was reflected to configure the sets of keywords, and only keywords and s were analyzed. Therefore, further studies are needed to confirm the differences between U-City and Smart City with related research papers and reports.

• Journal of Life Science
• /
• v.11 no.5
• /
• pp.457-463
• /
• 2001

A bacterial strain SC-22 which produced alkaline lipase was isolated from salf-fermented shrimps. Strains SC-22 was identified as Staphylococcus xylosus. An alkaline lipase excreted by Staphylococcus xylosus SC-22 was purified by ammonium sulfate predipitation and column chromatography on Sephadex G-100 and DEAE-Sephace. The specific activity of purified lipase was 756U/mg of protein with 17.2% yield. The approximate molecular weight of the purified enzyme was 47 kDa. The partially purified lipase preparation had and optimum temperature of 4$0^{\circ}C$, an optimum pH of 8.0, and a stable of 5~10. Lipase activities were enhanced by salt ions such as $Ca^{2+}$, $Mg^{2+}$,N $a^{2+}$ while inhibited remarkably by heavy metal ions, C $u^{2+}$ and P $b^{2+}$.EX> 2+/.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.90-95
• /
• 2000

Condensation heat transfer experiments for R-22 and R-407C refrigerants mixed with mineral oil and POE oil respectively were performed in straight and U-bend sections of a microfin tube. Experimental parameters were an oil concentration from 0 to 5%, a mass flux from 100 to $400 kg/m^2s$ and an inlet quality from 0.5 to 0.9. The enhancement factors for R-22 and R-407C refrigerants at the first straight section decreased continuously as the oil concentration increased. They decreased rapidly as the mass flux decreased and inlet quality increased. The heat transfer coefficients in the U-bend were the maximum at the $90^{\circ}$ position. The heat transfer coefficients at the second straight section within the dimensionless length of 48 were larger by a maximum of 33% than the average heat transfer coefficients at the first straight section.

• Archives of Pharmacal Research
• /
• v.18 no.6
• /
• pp.415-422
• /
• 1995

Twenty-four flavones were synthesized with various hydroxyl and/or methoxyl groups on A and B rings. Their antimutagenic properties were evaluated against ben:w(a)pyrene (BaP) and a pool of mutagenic urine concentrate (U) using a modified liquid incubation method of Ames test. The tester strain was Salmonella typhimurium TA98+S9 Mix. The antimutagenic activities were calculated by non linear regression analysis and the doses of flavones (in nmoles) required for a 50% reduction of induced revertants with BaP and U were defined as the inhibition doses (TEX>$ID_{508}{\;}and{\;}ID_{508}$ respectively). Seventeen flavones possessed significant antimutagenic activity against BaP. $ID_{508}$ ranged from 15.1 nmoles (F22) to 1000.6 nmoles (F13). Eighteen f1avones showed significant antimutagenic activity against U. $ID_{50U}$ ranged from 23.5 nmoles (F22) to 354.6 nmoles (F3). The 2',3',4'-trihydroxyflavone (F22, $ID_{508}=15.1$ nmoles, $ID_{50U}=23.5$ nmoles) and the 2',3',4',7-tetrahydroxyflavone (F20, $ID_{508}=37.8$ nmoles; $ID_{50U}=62.3$ nmoles) had antimutagenic activities similar to those of chlorophyllin ($ID_{508}=19.6$ nmoles and $ID_{50U}=44.2$ nmoles) and were evaluated against B(alP 7,8-dihydrodiol-9,10-epoxide. Against this last mutagen, the flavones which included three OH in B ring showed the highest activity and this property seemed independent of the substituent groups on A ring.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.109-109
• /
• 2018

Bacillus subtilis B22, a chemotrophic and aerobic bacterial strain was isolated from homemade kimchi, identified by 16S rRNA gene sequencing. B22 was primarily screened by biochemical, carbon source utilization tests. B22 was used to produce pectinase and ${\beta}$-glucosidase by submerged fermentation under different light sources. B22 was incubated in pectin media and basal media (pH 7.0) under blue, green, red and white light-emitting diodes (LEDs), fluorescent white light, and in darkness at $37^{\circ}C$, orbital shaker 150 rpm for 24 hours. Fermentation under blue LEDs maximized pectinase production ($71.59{\pm}1.6U/mL$ at 24 h) and ${\beta}$-glucosidase production ($56.31{\pm}1.6U/mL$ at 24 h). Further, the production of enzyme increased to pectinase ($156{\pm}1.28U/mL$) and ${\beta}$-glucosidase ($172{\pm}1.28U/mL$) with 3% glucose as a carbon source. Activity and stability of the partially purified enzymes were higher at pH 6.0 to 8.0 and $25-55^{\circ}C$. The effect on the metal ions $Na^+$ and $K^+$ and (moderateactivity) $Mn^{2+}$ and $Ni^{2+}$ increased activity, while $Hg^{2+}$, $Cu^{2+}$, $Fe^{2+}$, and $Fe^{2+}$ inhibited activity. EDTA, phenylmethylsulfonyl fluoride and 5,5-dithiobis (2-nitrobenzoicacid) reduced activity, while tetrafluoroethylene and 1,10-phenanthroline inhibited activity. The amylase was highly tolerant of the surfactants TritonX-100, Tween-20, Tween-80 and compatible with organic solvents methanol, ethanol, isoamylalcohol, isopropanol, t-butylalcohol and the oxidizing agents hydrogen peroxide, sodium perborate and sodium hypochlorite, although potassium iodide and ammonium persulfate reduced activity. These properties suggest utility of pectinase and ${\beta}$-glucosidase produced by B. subtilis B22 under blue LED-mediated fermentation for industrial applications.

• The Journal of the Korea Contents Association
• /
• v.22 no.1
• /
• pp.197-213
• /
• 2022

In this study, text mining analysis was performed on online big data for recognition and assessment of urban brand I Seoul U. To this end, TEXTOM, a processing program for data acquisition and analysis was used, and the 'I SEOUL U' keyword was selected as an analysis keyword. Keyword analysis shows the keywords associated with I Seoul U to be as follows: First, as a business and marketing term, keywords include pop-up store, gallery, co-branding, (festival, etc.), commodities, private companies and online. Second, as an event-related term, keywords include Han River, tree-planting day, tree planting, Hongdae, Christmas, Mapo, Jung-gu, Sejong University, and festival. Third, as a promotional term, keywords include robotics engineer Dr. Dennis Hong, Government, Art and Korea. In the N Gram analysis, as the city brand of Seoul, I Seoul U, in the public interest, was found to contribute to the commercial activities of private companies. In connection-oriented analysis, business and marketing, events, and promotions have been derived as categories. In matrix analysis, it was found that the products of the pop-up store are mainly developed, and products in the form of co-branding were being developed. In the topic modeling, a total of 10 topics were extracted and needs for commercial utilization and information for event festivals were mostly found.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.4
• /
• pp.472-483
• /
• 1999

The evaporation heat transfer and pressure drop characteristics for HFC-l34a in flat plate type heat exchangers with enhanced beads were experimentally investigated. Three plate type evaporators with different geometric condition of U-turn area were tested. Mass fluxes were tested over the range of 83kg/$m^2$s to 166kg/$m^2$s, and heat fluxes were varied from 4㎾/$m^2$ to 12㎾/$m^2$. Evaporation temperature was 5$^{\circ}C$ with inlet qualities of 0.1 to 1.0. There was no notable difference in the heat transfer coefficient by geometric variation of U-turn area, but the third plate with cross-ribbed channel at U-turn area was better than others in the evaluation using volume goodness factor comparison. Also, the mixtures of HFC-l34a and PAG oil was tested to determine oil effects on heat transfer and pressure drop. As oil concentration was increased, heat transfer coefficient was increased by 22~48% up to the 3wt.%, but decreased by 14~22% at the 4wt.%. The pressure drop was increased by the maximum of 100% as oil concentration was increased.

• Steel and Composite Structures
• /
• v.22 no.6
• /
• pp.1337-1358
• /
• 2016

The current study focuses on the assessment and interface response of reinforced concrete elements with composite materials (carbon fiber reinforced polymers-CFRPs, glass fiber reinforced polymers-GFRPs, textile reinforced mortars-TRM's, near surface mounted bars-NSMs). A description of the transfer mechanisms from concrete elements to the strengthening materials is conducted through analytical models based on failure modes: plate end interfacial debonding and intermediate flexural crack induced interfacial debonding. A database of 55 in total reinforced concrete columns (scale 1:1) is assembled containing elements rehabilitated with various techniques (29 wrapped with CFRP's, 5 wrapped with GFRP's, 4 containing NSM and 4 strengthened with TRM). The failure modes are discussed together with the performance level of each technique as well as the efficiency level in terms of ductility and bearing/ bending capacity. The analytical models' results are in acceptable agreement with the experimental data and can predict the failure modes. Despite the heterogeneity of the elements contained in the aforementioned database the results are of high interest and point out the need to incorporate the analytical expressions in design codes in order to predict the failure mechanisms and the limit states of bearing capacities of each technique.