• 한국도로학회논문집
• /
• 제14권1호
• /
• pp.55-61
• /
• 2012

본 연구는 도시지역 도로측구 등에 설치할 비점오염원의 정화장치 개발을 위해 여과재의 개발에 연구의 초점을 맞추었다. 필터는 다양한 미세기공을 갖고 있어 물리적 흡착능력이 뛰어나며, 결정 구조 안에 다양한 양이온이 배위되어 있어 화학적 흡착이 탁월한, 다공성 점토광물을 직경 3mm 볼 형태로 제작하였다. 성형한 필터에 도시지역 강우 직후 발생한 오염 원수를 통과시켜 SS, COD, T-P, T-N의 제거 능력을 폐수정화에 흔히 이용되는 첨착활성탄(Impregnated Activated Carbon) 필터와 비교 분석하였다. 다공성 점토광물 필터와 첨착활성탄 필터의 T-N과 T-P 여과능력은 거의 차이가 없음을 알 수 있었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권5호
• /
• pp.10-17
• /
• 2022

Inorganic acids such as HCl, HNO₃, and H₂SO₄ have been commonly applied to soil washing of heavy metals-contaminated soil due to their cost-effectiveness. However, implementing the 'Chemical Substance Control Act' requires off-site risk assessment of the chemicals used in the soil washing. Therefore, in this study, organic acids or Fe(III)-based washing agents were evaluated to replace commonly used inorganic acids. Ferric removed heavy metals via H⁺ generated by hydrolysis, which is similar to the HCl used in the control group. Oxalic acid and citric acid were effective to remove Cu, Zn, and Cd from soil. Organic acids could not remove Pb because they could form Pb-organic acid complexes with low solubility. Furthermore, Pb could be adsorbed onto the iron-organic acid complex on the soil surface. Ferric could remove exchangeable-carbonate, Fe-Mn hydroxide, and organic matter and sulfides bound heavy metals (F1, F2, and F3). Organic acids could remove the exchangeable-carbonate and Fe-Mn hydroxide bound metals (F1&F2). Therefore, this research shows that the fractionation of heavy metals in the soil and the properties of washing agents should be considered in the selection of agents in the process design.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.183-185
• /
• 2004

In this study, the combined electrokinetic and ultrasonic remediation technique, ultrasonically enhanced electrokinetic technique, was studied for the removal of heavy metal and organic substance in contaminated soils. The electrokinetic technique has been applied to remove mainly the heavy metal and the ultrasonic technique has been to remove mainly organic substance in contaminated soil. The laboratory soil flushing tests combined electrokinetic and ultrasonic technique were conducted using specially designed and fabricated devices to determine the effect of these both techniques. A series of laboratory experiments involving the simple, electrokinetic, ultrasonic, and electrokinetic & ultrasonic flushing test were carried out. A soil admixed with sand and kaolin was used as a test specimen, and Pb and ethylene glycol were used as contaminants of heavy metal and organic substance. An increase in out flow, permeability and contaminant removal rate was observed in electrokinetic and ultrasonic flushing tests. Some practical implications of these results are discussed in terms of technical feasibility of in situ implementation of electrokinetic ultrasonic remediation technique.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 춘계학술발표대회
• /
• pp.9-12
• /
• 2017

FreeType is a rasterizer which is commonly used in different operating systems like Linux, android etc. Although FreeType is open source but it is not easy to add/remove modules and services etc. for developers. This paper proposes a new module for FreeType named as FreeType Outlet adapter (FOA). It enables to add/remove modules, services, functionality etc. inside FreeType. It acts as the bridge to add functions from outside FreeType to the inner core of FreeType. New font formats like METAFONT, animated fonts and customized fonts which currently are not supported by FreeType can be added with this FOA module.

• 한국대기환경학회지
• /
• 제14권5호
• /
• pp.455-464
• /
• 1998

Removal teals of Soxmox were performed using low density ceramic filters doped with various catalysts. Disc type (50 mmO.Dx10 mmt) low density ceramic filters were doped with three different catalysts such as Cu to remove SOx and NOx, and Mn and Co to remove NOx. The air permeabilities and specific surface areas were 40~50cc/min.cm2.cmH2O and 4.1~8.88 m2/g, respectively. Also, the peak pore sizes of catalyst support were 3~5nm. Tests were focused to search optimum operating temperatures for different catalysts. It was found that as the CuO content increases, SOx removal efficiency was increased. NOx removal efficiencies for Mn, Cu and Co, were 85% at 30$0^{\circ}C$, 90% at 40$0^{\circ}C$ and 90% at 45$0^{\circ}C$, respectively.

• 대한설비공학회지:설비저널
• /
• 제35권12호
• /
• pp.41-48
• /
• 2006

For the Designing a Dedicated Outdoor Air System with Ceiling Radiant Cooling Panels the concept of a dedicated outdoor air system(DOAS) with parallel sensible cooling was born from the decoupled system concept, which can be summarized as decoupling of ventilation and air-conditioning functions, or decoupling of sensible and latent load functions. First , remove the latent loads from the outside air(OA) intake and generated in spaces using a 100% OA ventilation system(i.e., DOAS). Second, remove the space sensible loads using a parallel mechanical cooling system, such as fan coil units, conventional variable air volume , and ceiling radiant cooling panel(CRCP) independent of the ventilation system.

• 한국연초학회지
• /
• 제21권1호
• /
• pp.102-108
• /
• 1999

This study was conducted to evaluate the ventilation to remove gases, vapor and particles of environmental tobacco smoke(ETS) in a closed room. The ventilation rate choosed were 0.445 ㎥/min, 0.528 ㎥/min, and 0.625 ㎥/min. ETS components measured were total suspended particle(TSP), ultraviolet particulate matter(UVPM), fluorescent particulate matter(FPM), solanesol, carbon dioxide($CO_2$), carbon monoxide(CO), nicotine, and 3-ethenylpyri-dine(3-EP). The concentration of ETS components measured rapidly decreased as increasing ventilation rate, but the removal efficiency by ventilation was different from each ETS compounds. The $CO_2$, and CO, gaseous components of ETS, were dominant components to be removed from the room by ventilation. The ventilation with 0.528 ㎥/min for 1 hr was enough to remove over 99% of those gaseous components. Nicotine and 3-EP needed the ventilation for 2 hrs to reduce over 95 % of those components. As the same ventilation rate, 99 % of TSP and solanesol concentration were removed from the room within 2 hrs, UVPM and FPM concentration decreased 90 %.

• 전자공학회논문지T
• /
• 제36T권4호
• /
• pp.24-29
• /
• 1999

In this paper, a simple contour-preserving filtering algorithm is proposed. The goal of the contour-preserving filtering method is to remove noise ad granularity as the preprocessing for the image segmentation procedure. Our method finds edge map and separates the image into the edge region and the non-edge region using this edge map. For the non-edge region, typical smoothing filters could be used to remove the noise and the small areas during the segmentation procedure. The result of simulation shows that our method is slightly better than the typical methods such as the median filtering and gradient inverse weighted filtering in the point of view of analysis of variance (ANOVA).

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.72-73
• /
• 1998

A new method for enzyme immobilization has been developed to remove interference by potential interferents in body fluids. Instead of using electron mediators, we chose direct hydrogen peroxide measurement route. Extremely hydrogen peroxide-selective polymer was coated as an inner membrane to exclude interferents and then glucose oxidase(GOx) was entrapped by electropolymerization of inert monomers. There was no solvent casting step throughout the whole fabrication procedure but all membranes on Pt-Ir electrode were formed by electropolymerization. Thus, membrane thickness, quantity of enzyme loaded and can be controlled by electrochemical parameters. As a result, reproducibility of biosensor characteristics becomes remarkably improved in terms of mass production.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.842-851
• /
• 1996

Median filter(MF) has often been applied to color or gray images as a noise fiilter in image processing . Application of MF to binary images was tried in this study. For binary images, MF not only can remove noise but can also work as an indicator showing the dominant color in a region which is called window . Fro example, MF can be used to categorize clusters and to detect interested parts of an object. In other words, MF can also be used to remove unnecessary parts. The function of MF can be intensified by introducing a thresholding value, which is determined by the size of the interested part of an object. This improved MF for binary images is called the modified median filter(MMF), and its applicability to grade produce will be discussed in this paper.