지반진동특성의 지진공학적인 정밀측정의 일환으로 지반진동의 탁월주기와 지반진동의 거리에 따른 감쇠특성을 현장실험을 통하여 조사하였다. 이 조사는 세가지 부분의 실험을 통하여 결과를 얻었다. 첫째, 지반의 탁월주기는 고감도 디지탈 속도지진계-3축성분 속도계를 이용하는 Seismometer와 디지탈 Seismograph를 이용하여 지반과 건물에서 일정한 주기를 가진 연속적인 미소진동으로 부터 지반 및 건물진동의 탁월주기를 계측하였다. 지반에서의 탁월주기는 0.18~0.23 sec, 건물2층의 탁월주기는 0.26~0.31 sec였다. 둘째, 지반 구조조사는 디지탈 탄성파탐사기를 이용하여 굴절법을 이용한 탄성파탐사를 실시하였다. 실험장소인 한양대학교 안산캠퍼스의 지층구조는 상부층(표토층: surface layer)은 저속도층으로서 662m1s, 하부층(지반층: base ground)은 2210m/s의 P파 속도를 갖고, 주시곡선도로부터 표토층의 두께는 약 7m로 검측되었다. 이것은 7m두깨의 표토층(top soil)과 그 하부에 사질 점토성의 지반층(base ground)이 존재함을 암시한다. 셋째, Seisgun을 이용하여 인공적인 탄성파 에너지원을 만들어 지반의 진동 감쇠특성을 조사 하였다. 거리 감쇠상수(spatial attenuation conf$\ulcorner$icient) Y는 거리에 따른 진폭 을 계산하여 Z-성분(vertical)은 0.0137, X-성분(longitudinal)은 0.0025, Y-성분(transverse)은 0.0290이고 Spatial QP의 값은 각각 5.913~7.575, 32.371 ~41.452, 2.794~3.579의 값이 산출되었었다. 이 결과 다른 두성분에 비해서 종방향(z-성분, longitudinal)성분은 감쇠경향이 낮음을 알 수 있다. 그러므로 이 경우에 구조물 설계시 종방향(x-성분, longitudinal)성분에 대 한 내진설계가 고려 되어야 할 것이다.
초고층 건물의 구조설계시 풍하중에 의한 횡방향 변위를 적절한 값 이내로 줄이는 것이 가장 중요한 문제 중에 하나이다. 이를 위해서 추가적인 감쇠기 및 진동제어장치를 사용하는 방법이 일반적으로 고려되고 있다. 이 때 일반적으로 구조물의 특성은 변화없이 추가되는 제어장치에 대해서만 최적설계를 수행하게 된다. 본 연구에서는 구조물과 스마트 제어장치의 다목적 통합 최적화를 통하여 추가되는 스마트 제어장치로 인하여 구조물의 물량을 줄일 수 있는 가능성을 검토하였다. 이를 위하여 다이어그리드 구조시스템이 적용된 60층 초고층 건물을 예제 구조물로 선택하였고, 인공 풍하중에 대한 풍응답을 검토하였다. 스마트 제어장치로는 TMD에 MR 감쇠기를 설치한 스마트 TMD를 사용하였다. 구조물의 응답과 구조물량 및 제어장치의 용량을 동시에 줄이는 것이 필요하므로 본 연구에서는 다목적 유전자알고리즘을 적용하였다. 수치해석결과 제어성능목표를 만족시키면서 구조물의 물량과 제어장치의 용량을 적절하게 줄일 수 있는 다양한 설계 최적안을 얻을 수 있었다.
한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
/
pp.389-396
/
2002
In XXI century it is necessary to expect the recommencement and development of activities on mastering the Moon. In the long term it is construction of manned lunar bases with industrial, astrophysical, procuring, repair equipment and services. Interplanetary flights from the Moon demand smaller power expenditures, than from the Earth, therefore it is favourable to use its surface for the construction of space-vehicle launching sites. Flights of devices in libration points in the system 'Earth - Moon' are considered. Experience of engineering system creation for the Moon displays the great complexity in provision of serviceability and reliability of friction units. Open friction units should operate under following conditions on the Moon: pressure of environment (vacuum) $p\;>10\;^{-10}$ Pa; wide range of temperature change $+150^{\circ}C\;...170^{\circ}C$; high evaporability of lubricants; influence of temperature gradients and warping of constructions; sublimation of elements of constructional materials; irradiation of different physical nature; effect of micrometeorites; reduced gravitation; influence of abrasive particles of lunar ground; requirements on minimization of size and weight characteristics of a construction (high tension); undesirability (impossibility) of application of liquid and plastic lubricants; vibration, shock, acoustic loadings during start and landings to the Earth; difficulties in repair-regenerative operations in conditions of the Moon etc. Adhesive interaction of conjugated surfaces is the principal reason of possible failures of rubbed units on the Moon. In the research of the Moon automatic interplanetary stations of 'Luna' (USSR), 'Surveyer', 'Apollo' (USA) series were used. Stations executed functions of flying, landing, artificial satellites of the Moon, moon-rovers and manned spacecrafts such as 'Apollo'. The experimental- theoretical researches carried out in the sixtieth years on tribology for conditions of the Moon appeared to be rather useful to engineering of an outer space exploration and the decision of complex problems for the friction units operating in extreme conditions on the Earth. For the creation of highly loaded friction units for the long service life on the Moon it is required not only to use accumulated experience and designed technologies, but also to carry out wide scientific research.
높은 에너지의 레이저가 조사되면 레이저 삭마 현상을 일으키고, 결과적으로 플라즈마가 물질에 따라 특정한 파장의 빛을 방출하는 레이저 유도 파괴 분광법(LIBS, Laser-Induced Breakdown Spectroscopy)과 빛은 산란 현상에 대해 분자 간 혹은 분자 내의 회전 및 진동 운동을 측정하는 라만 분광법은 높은 정확도와 실시간 분석이 가능하다는 점, 원거리 검출이 가능하다는 장점들을 기반으로 우주 탐사 기술로써 주목을 받고 있다. 본 연구에서는 레이저 분광법을 활용하여 토양 성분의 변화에 따른 레이저 스펙트럼의 경향성을 파악하고, 이를 기반으로 2차원 화학적 분포도 실험을 진행하였다. 또한 화성(4-7 torr)과 달의 대기(<1 torr) 환경을 레이저 실험 환경 내에 구축하여 인공적인 우주 환경에서 LIBS와 라만 분광법을 활용하여 토양 성분의 변화에 따른 LIBS와 라만 분광법을 통한 계측이 가능함을 증명하였다.
금속으로 이루어진 물질의 경우에는 고유하며 명백한 공진 주파수를 가지고 있다. 이러한 성질을 이용하여, 공장에서 만들어진 제품의 품질 테스트를 실행할 수 있다. 해당 제품에 충격을 가하고 이로부터 발생되는 소리나 진동의 주파수를 고성능의 장비를 이용하여 측정하게 된다. 범용 컴퓨터나 DSP 기반의 단독 시스템들이 이를 위해서 사용되며 이러한 장비들은 들고 다니기에 크기가 너무 크고 구축비용이 많이 든다. 본 논문에서는 TI의 MSP430 계열의 MCU를 이용하여 개발된 시스템에 대하여 소개하고자 한다. 초저전력의 MSP430 MCU들은 큰 용량의 배터리가 필요 없으므로 매우 작은 크기의 주파수 분석기를 제작하는 것이 가능하게 한다. 제안된 시스템은 검사원이 쉽게 장비를 가지고 다닐 수 있어야 하고 정확도를 다소 희생하더라도 작은 개발비용이 요구되는 환경에 사용될 수 있을 것이다. 제안된 시스템은 론치패드를 이용하여 개발되었으며, 인위적이거나 자연스런 소리의 주파수를 매우 높은 정확도로 판별 할 수 있음을 확인할 수 있었다.
A good understanding of normal modal variability of civil structures due to varying environmental conditions such as temperature and wind is important for reliable performance of vibration-based damage detection methods. This paper addresses the quantification of wind-induced modal variability of a cable-stayed bridge making use of one-year monitoring data. In order to discriminate the wind-induced modal variability from the temperature-induced modal variability, the one-year monitoring data are divided into two sets: the first set includes the data obtained under weak wind conditions (hourly-average wind speed less than 2 m/s) during all four seasons, and the second set includes the data obtained under both weak and strong (typhoon) wind conditions during the summer only. The measured modal frequencies and temperatures of the bridge obtained from the first set of data are used to formulate temperature-frequency correlation models by means of artificial neural network technique. Before the second set of data is utilized to quantify the wind-induced modal variability, the effect of temperature on the measured modal frequencies is first eliminated by normalizing these modal frequencies to a reference temperature with the use of the temperature-frequency correlation models. Then the wind-induced modal variability is quantitatively evaluated by correlating the normalized modal frequencies for each mode with the wind speed measurement data. It is revealed that in contrast to the dependence of modal frequencies on temperature, there is no explicit correlation between the modal frequencies and wind intensity. For most of the measured modes, the modal frequencies exhibit a slightly increasing trend with the increase of wind speed in statistical sense. The relative variation of the modal frequencies arising from wind effect (with the maximum hourly-average wind speed up to 17.6 m/s) is estimated to range from 1.61% to 7.87% for the measured 8 modes of the bridge, being notably less than the modal variability caused by temperature effect.
The Mega-Sub Controlled Structure System (MSCSS), an innovative vibration passive control system for building structures, is improved by adding lead rubber bearings (LRBs) on top of the substructure. For the new system, a genetic algorithm is used to optimize the dynamic parameters and distributions of dampers and LRBs. The program uses various seismic performance indicators as optimization objectives, and corresponding results are compared. It is found that the optimization procedure for maximizing the energy dissipation ratio yields the best solutions, and optimized models have consistent seismic performances under different earthquakes. Seismic performances of optimized MSCSS models with and without LRBs, as well as the traditional Mega-Sub Structure model, are evaluated and compared under El Centro wave, Taft wave and 20 other artificial waves. In both elastic and plastic analysis, the model with LRBs shows significantly smaller story drift and horizontal acceleration than those of the other two models, and fewer plastic hinges are developed during severe earthquakes. Energy analysis also shows that LRBs installed in proper locations increase the deformation and energy dissipation of dampers, thereby significantly reduce the kinetic, potential, and hysteretic energy in the structure. However, LRBs do not have to be mounted on all the additional columns. It is also demonstrated that LRBs at unfavorable locations can decrease the energy dissipation for dampers. After LRBs are installed, the optimal damping coefficient and the optimal damping exponent of dampers are reduced to produce the best damping effect.
지진하중이 가해지는 구조물의 동적응답을 줄이기 위해서 면진장치가 널리 사용되고 있다. 근래에 들어서는 면진층의 변위를 증가시키지 않으면서도 면진된 구조물의 동적응답을 효과적으로 줄일 수 있는 스마트 면진시스템에 대한 연구가 활발히 이루어지고 있다. 이에 본 연구에서는 지진하중을 받는 아치구조물의 동적응답을 저감시키기 위하여 스마트 면진시스템을 적용하였고 제어성능을 검토하였다. 스마트 면진시스템을 구성하기 위하여 4kN 용량의 MR 감쇠기와 저감쇠 탄성 고무베어링을 사용하였다. 제안된 스마트 면진시스템의 제어성능을 검토하기 위하여 최적설계된 LRB와 지진응답 제어성능을 비교하였다. 이를 위하여 KBC2009 설계응답스펙트럼에 맞추어 생성한 인공지진파를 지진하중으로 사용하였다. 스마트 면진시스템의 MR 감쇠기를 제어하기 위하여 퍼지제어기를 사용하였으며, 다목적 유전자알고리즘을 이용하여 최적화하였다. 수치해석결과 스마트 면진시스템을 사용하면 LRB를 사용한 경우와 비교하여 면진층 변위와 아치구조물의 지진응답을 크게 줄일 수 있음을 확인하였다.
현재까지 스마트 면진시스템은 일본이냐 미국 같은 강진지역에서 개발되고 적용되어 왔다. 이렇게 강진지역에 있는 건축물을 지진하중으로부터 보호하기 위하여 개발된 스마트 면진시스템은 우리니라와 같은 중약진 지역에 있는 건축물에 그대로 적용되기에는 많은 한계점이 있다. 따라서 본 연구에서는 강진지역에 건설되는 건축물을 위한 스마트 면진시스템을 중약진 지역에 건설되는 건축물에 작용하였을 때 발생하는 문제점음 검토해보았다. 이를 위하여 예제구조물로 대공간 아치구조물을 선택하였고 스마트 면전시스템은 MR 감쇠기와 저감쇠 탄성베어링을 사용하여 구성하였다. 강진지역과 중약진 지역에서 발생하는 지진하중으로는 기존에 발생한 역사지진을 바탕으로 인공지진을 생성하였다. 수치해석결과 강진지역에 건설되는 대공간구조물을 위하여 개발된 스마트 면진시스템을 그대로 중약진 지역에 적용하면 면진효과가 상당히 줄어들므로 스마트 제어장지의 용량이 중약진 지역에 맞추어 주의 깊게 설계되어야 함을 알 수 있었다.
구조물의 시간경과에 따른 변형 및 성능저하 현상은 인위적 요인 및 시간경과에 따른 지반상태의 변화 혹은 지반 변위요인의 누적에 의해 발생한다 본 연구에서는 경상남도 경주시에 위치한 첨성대를 연구대상으로 설정하였다. 첨성대는 약 1,300여 년 전 건립된 석축구조물로서 지반침하로 약간 기울어져 있으며 일부 석재 사이의 틈이 벌어져 있는 상태이다 본질적인 대책수립을 위하여 본 연구에서는 이러한 목적을 위하여 차원 레이저스캐닝시스템에 의한 형상 역공학적 연구 물리탐사에 의한 지반공학적 특성 연구 및 고유진동수 측정에 의한 첨성대의 동적특성 등의 다음과 같은 연구들을 수행하였다 첫째 정밀측량에 의한 첨성대의 정밀한 변형량 측정 및 지속적인 변위측정을 위하여 차원 레이저 스캐닝에 의한 첨성대의 차원 공간위치정보를 취득하여 형상역공학에 의한 차원 벡터
이미지 형상구현 및 첨성대의 크기 변위량 변위방향 등 여러 가지 제원을 구하고자 하였다 둘째 다양한 비파괴적 물리탐사 방법들을 적용하여 첨성대 및 주변 지반의 물성분포 및 지반특성을 파악하고자 하였다 한편 다양한 물리탐사를 통하여 향후 유사한 조사에 있어서 적절한 물리탐사 방법을 제시하고자 하였다 셋째 경주 첨성대의 1/10모형에 대한 동적특성실험 및 실물에 대한 고유진동수 측정을 통해 첨성대의 구조적 특성을 연구하여 첨성대의 구조특성 및 상태판단 및 동적특성 파악에 의한 내진성능을 판단하고자 하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.