• Asian-Australasian Journal of Animal Sciences
• /
• 제11권2호
• /
• pp.196-200
• /
• 1998

The proximate composition of viscera of six fish species viz., Catla catla, Labeo, rohita Cirrhina mrigala, Hypophthalmichthys molitrix, Ctenopharyngodon idella and Cyprinus carpio under the influence of artificial feed $(T_1)$, broiler manure $(T_2)$, buffalo manure $(T_3)$, N:P:K (25:25:0 $T_4$) and control pond $(T_5)$ has been studied on final harvest after the end of experimental period of one year. The overall comparison of six fish species under five different treatments showed that Cyprinus carpio remained the best for visceral total protein contents. The maximum visceral protein content was recorded in fishes under $T_2$ except Cirrhina mrigala, while the minimum under $T_5$. The comparison of five treatments showed that maximum (6.69) percentage of fat in viscera of fish was recorded under $T_2$, closely followed by $T_4$ while minimum (4.89) under the effect of $T_5$. Among the six fish species under five treatments Cyprinus carpio showed maximum accumulation/deposition of total fats in viscera.

• 한국조경학회지
• /
• 제27권3호
• /
• pp.109-113
• /
• 1999

The objective of this research was to develop growth media for artificial ground by blending calcined clay and coconut peat. To achieve this, aggregates of clay particles were mixed with disel oil and heated to high temperature(1150~120$0^{\circ}C$) to expand clays. The particle sizes of expanded clay were controlled to 2~5mm in diameter. Then expanded clayes were mixed with coconut peat and changes of soil physicochemical properties and their effect on plant growth of Hedera L. were determined. The infiltration rate of calcined clay was very high, but the water holding capacity, the cation exchange capacity(CEC), and the nutrient contents were low. The characteritics of coconut peat was vice verse to calcined clay. This indicates that the mixture of calcined clay and coconut peat have the better characteristics than each material. As compared to mineral soil, the infiltration rate, the water holding capacity, the CEC and the nutrient contents increased, but bulk density decreased to about 1/4. And, Hedera L. grown in the mixture of calcined clay and coconut peat(6:4, v/v) had higher plant height, longer leaf length, more total number of leaves per plant and fresh weight than that grown in mineral soil, but statistical differences were not observed between two treatments.

• 보존과학연구
• /
• 통권30호
• /
• pp.125-136
• /
• 2009

Stone cultural heritages in Korea have a severe damages from chemical and biological weathering because most of them have been situated in outdoors without any suitable protection systems, and this in turn causes deformation and structural damage. To counteract these problems and increase durability, various kinds of conservation materials are used in the conservation and restoration treatments. However until now there are not many practical and technological experiments on this subject. This paper attempts quantitative evaluation of effectiveness about chemical of ethylsilicate based resin for sandstone in Yeongyang-gun. It takes a long time to evaluate durability and side effect after conservation materials treatment. So we use artificial weathering through freezing§ thawing experimental method. As a result of this experiment, porosity and absorptance increased, and elastic wave speed, elastic modules, unconfined compression strength and tensile strength decreased more than before. This study plans to make a scientific method study about weathering factor and mechanism, and to deduce correlation between artificial weathering and natural weathering.

• 한국축산식품학회지
• /
• 제36권5호
• /
• pp.650-655
• /
• 2016

This study investigated the effects of artificial supercooling followed by still air freezing (SSF) on the qualities of pork loin. The qualities of pork frozen by SSF were compared with the fresh control (CT, stored at 4℃ for 24 h), slow freezing (SAF, still air freezing) and rapid freezing (EIF, ethanol immersion freezing) treatments. Compared with no supercooling phenomena of SAF and EIF, the extent of supercooling obtained by SSF treatment was 1.4℃. Despite that SSF was conducted with the same method with SAF, application of artificial supercooling accelerated the phase transition (traverse from -0.6℃ to -5℃) from 3.07 h (SAF) to 2.23 h (SSF). The observation of a microstructure indicated that the SSF prevented tissue damage caused by ice crystallization and maintained the structural integrity. The estimated quality parameters reflected that SSF exhibited superior meat quality compared with slow freezing (SAF). SSF showed better water-holding capacity (lower thawing loss, cooking loss and expressible moisture) and tenderness than SAF, and these quality parameters of SSF were not significantly different with ultra-fast freezing treatment (EIF). Consequently, the results demonstrated that the generation of supercooling followed by conventional freezing potentially had the advantage of minimizing the quality deterioration caused by the slow freezing of meat.

• 소성∙가공
• /
• 제30권2호
• /
• pp.61-68
• /
• 2021

As part of efforts to reduce the weight of automotive body-in-white, a hybrid center pillar with high strength 7075 aluminum alloy (AA7075) sheet and carbon fiber reinforced plastic (CFRP) has been recently studied. In the fabrication of the AA7075-CFRP hybrid center pillar, the AA7075 sheet might go through heating-forming-in-die quenching (HFQ), artificial aging, hybridizing, and then paint baking processes. In this study, we investigate the effects of the heat treatment history associated with each process on the tensile strength of the AA7075 sheet. Typical heat treatment conditions are HFQ for 20 minutes at 480℃ and then cooling down with die, artificial aging of T6 temper for 24 hours at 120℃, hybridizing for 10 minutes at 150℃, and paint baking for 20 minutes at 180℃. The tensile strength of the AA7075 sheet is continuously increased by a series of heat treatments of hybridizing and paint baking and is expected to have yield stress above 500MPa without artificial aging of T6 temper.

• Imaging Science in Dentistry
• /
• 제53권3호
• /
• pp.199-207
• /
• 2023

Purpose: The objective of this study was to evaluate the accuracy and effectiveness of an artificial intelligence (AI) program in identifying dental conditions using panoramic radiographs(PRs), as well as to assess the appropriateness of its treatment recommendations. Materials and Methods: PRs from 100 patients(representing 4497 teeth) with known clinical examination findings were randomly selected from a university database. Three dentomaxillofacial radiologists and the Diagnocat AI software evaluated these PRs. The evaluations were focused on various dental conditions and treatments, including canal filling, caries, cast post and core, dental calculus, fillings, furcation lesions, implants, lack of interproximal tooth contact, open margins, overhangs, periapical lesions, periodontal bone loss, short fillings, voids in root fillings, overfillings, pontics, root fragments, impacted teeth, artificial crowns, missing teeth, and healthy teeth. Results: The AI demonstrated almost perfect agreement (exceeding 0.81) in most of the assessments when compared to the ground truth. The sensitivity was very high (above 0.8) for the evaluation of healthy teeth, artificial crowns, dental calculus, missing teeth, fillings, lack of interproximal contact, periodontal bone loss, and implants. However, the sensitivity was low for the assessment of caries, periapical lesions, pontic voids in the root canal, and overhangs. Conclusion: Despite the limitations of this study, the synthesized data suggest that AI-based decision support systems can serve as a valuable tool in detecting dental conditions, when used with PR for clinical dental applications.

• 한국응용곤충학회:학술대회논문집
• /
• 한국응용곤충학회 2001년도 합동 춘계 학술발표회
• /
• pp.61-61
• /
• 2001

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.60-65
• /
• 1995

Recently, water-proof treatments have been required for reducing the carbonigation in the upper plate of bridge. In this study, the experiments were conducted for penetrable water proof in two ways ; one is under natural conditions and the other under artificial. The experimental results shows that the penetrable depth for the penetrable water proof shows in inverse proportional to concrete strength and auti-acid property. Also, auti-heating property is revealed excellent with the penetrable water proof and endurability under the disclosure in natural condition is not permanent

• 한국수의병리학회:학술대회논문집
• /
• 한국수의병리학회 2002년도 추계학술대회초록집
• /
• pp.66-79
• /
• 2002

The basic treatments - Epithelial ＆ stromal debridement with a swab or diamond burr. - Possible placement of a collagen shield or nictitans flap. - Topical treatment with Adequan IM diluted in artificial tears : 1 ml Adequan + 4 ml tears : One drop four times daily. - Topical treatment with an antibiotic drop : Three times daily - 5％ sodium chloride ointment : Four times daily. If inflammation is severe - Topical treatment with nonsteroidal agent : Four times daily (Voltaren, Ocufen, or Profenyl) - Cyclosporine A (Optimmune) : Twice daily Healing time - Healing typically occurs rapidly - Fluorescein negative : 7-10 days - Vascular keratitis : Often several months

• 수면정신생리
• /
• 제15권1호
• /
• pp.12-16
• /
• 2008

Light therapy (also called light treatment or phototherapy) involves scheduled exposure to bright artificial light. Evidence-based treatments for sleep disorders especially for circadian rhythm sleep disorders include light therapy and pharmacotherapy. In clinical practice, many of patients with sleep problems tend to impair circadian rhythmicity. Considering that light is the most potent entraining agent of circadian rhythm, careful use of light therapy can be recommended for patients with several kinds of sleep disorders. I briefly review the possible therapeutic mechanisms and clinical applications of light therapy, focusing on circadian sleep disorders.