• 한국균학회지
• /
• 제36권1호
• /
• pp.31-35
• /
• 2008

잎새버섯의 생육환경 중에 광이 자실체 발생 및 생육에 미치는 영향을 구명하기 위하여 광질 3종류(청색광, 녹색광, 백색광), 광량 4수준(200, 500, 8000, 1200 lux)으로 시험한 결과는 다음과 같다. 광질이 자실체 발생 및 생육에 미치는 영향을 조사한 결과 백색광의 발이율이 청색, 적색보다 높고 초발이 소요일수도 3일로 청색광, 녹색광의 5일보다 빠른 것으로 나타났다. 생육일수는 백색광과 청색광이 14일로 녹색광(16일)보다 2일 빠르며, 전체 재배일수 또한 백색광이 52일로 청색광보다 1일, 녹색광보다 4일 단축되었다. 봉지당 수량성에서도 백색광이 242 g 으로 청색광(230 g)과 녹색광(216 g)보다 우수하였다. 백색광의 광량이 지질체 발생 및 생육에 미치는 영향을 조사한 결과 200 lux의 광량에서 발이율이 가장 우수하고, 초발이 소요일수도 4일로 500, 800, 1200 lux의 $7{\sim}8$일보다 $3{\sim}4$일 정도 빠른 것으로 나타났다. 생육일수는 500 lux가 9일로 가장 빨랐으며, 전체 재배일수는 200, 500 lux가 49일로 800, 1200 lux의 51일보다 2일정도 빨라 광량이 증가할수록 재배기간이 다소 길어졌다. 봉지당 수량성은 500 lux가 257 g 으로 가장 우수하였고, 광량이 증가할수록 갓의 크기가 신장되고, 갓 색이 다소 진한 것으로 나타났다.

• 원예과학기술지
• /
• 제30권6호
• /
• pp.673-679
• /
• 2012

본 실험은 밀폐형 식물생산시스템에서 인공광원과 광조사 시간에 따른 잎상추 '선홍적축면' 품종의 적정 생육 조건을 구명하고자 수행하였다. 상추 유묘를 3종류의 인공광원인 형광등과 에프씨 포이베(사)와 헤파스(사)의 백색 LED 아래에서 재배하였고, 광조사 시간을 각각 12/12, 18/6, 24/0(명기/암기)으로 처리하였다. 광파장대를 측정한 결과 형광등은 400-700nm 범위에서 다양한 피크를 나타냈지만, 2종류의 백색 LED에서는 450nm와 550nm의 파장대역에서만 피크를 나타냈다. 초장, 생체중 및 건물중은 광조사 시간을 24/0(명기/암기)으로 처리하였을 때 가장 우수했다. 또한 엽면적도 광조사 시간 24/0(명기/암기) 처리구에서 좋았다. 형광등 처리가 2종류의 백색 LED와 비교하여 최대근장, 엽수, 생체중 및 총 안토시아닌 함량이 우수하였다. 엽록소 형광값은 형광등을 사용하여 광조사 시간을 12/12(명기/암기)로 처리하였을 때 가장 높았다. 형광등 광원에서 광 에너지 사용 효율은 LED 등이 형광등과 비교하여 약 35-46% 더 높았다. 본 결과는 식물공장 시스템에서 상추 재배를 위한 형광등의 대체 광원으로써 LED의 이용가능성을 보여 주었다.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.279-286
• /
• 2013

Purpose: This study was conducted to analyze the utilization efficiencies of electric energy and photosynthetically active radiation of lettuce grown under red LED, blue LED and fluorescent lamps with different photoperiods. Methods: Red LED with peak wavelength of 660 nm and blue LED with peak wavelength of 450 nm were used to analyze the effect of three levels of photoperiod (12/12 h, 16/8 h, 20/4 h) of LED illumination on light utilization efficiency of lettuce grown hydroponically in a closed plant production system (CPPS). Cool-white fluorescent lamps (FL) were used as the control. Photosynthetic photon flux, air temperature and relative humidity in CPPS were maintained at 230 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, $22/18^{\circ}C$ (light/darkness), and 70%, respectively. Electric conductivity and pH were controlled at 1.5-1.8 $dS{\cdot}m^{-1}$ and 5.5-6.0, respectively. The light utilization efficiency based on the chemical energy converted by photosynthesis, the accumulated electric energy consumed by artificial lighting sources, and the accumulated photosynthetically active radiation illuminated from artificial lighting sources were calculated. Results: As compared to the control, we found that the accumulated electric energy consumption decreased by 75.6% for red LED and by 70.7% for blue LED. The accumulated photosynthetically active radiation illuminated from red LED and blue LED decreased by 43.8% and 33.5%, respectively, compared with the control. The electric energy utilization efficiency (EEUE) of lettuce at growth stage 2 was 1.29-2.06% for red LED, 0.76-1.53% for blue LED, and 0.25-0.41% for FL. The photosynthetically active radiation utilization efficiency (PARUE) of lettuce was 6.25-9.95% for red LED, 3.75-7.49% for blue LED, and 2.77-4.62% for FL. EEUE and PARUE significantly increased with the increasing light period. Conclusions: From these results, illumination time of 16-20 h in a day was proposed to improve the light utilization efficiency of lettuce grown in a plant factory.

• 한국멀티미디어학회논문지
• /
• 제19권11호
• /
• pp.1891-1899
• /
• 2016

Recently food problem and crop disaster have been increased continuously because of the meteorological changes. These cause rising cost for crops continuously and irregularly. Some researchers have studied straight structure of device for hydroponics and plant factory previously to solve a fundamental part of these problems. However, there are several problems such as limited crop cultivation space, providing irregular nutrients for crops, and lack of monitoring interfaces. For them, we propose an optimal growth and development crops management system using light source tracking and recirculation of nutrient solution method to supply nutrient continuously based on IoT. In order to evaluate the performance of our system, we compared and analyzed in terms of two viewpoints, the tracking analysis for natural light source measurement and the growth of crops through artificial light, LED, respectively. We confirmed that the higher the duty ratio of LED, the larger the crop's size, particularly. As well as, for about 1 month, we compared with the existing natural light growing environment and that of our system. It was confirmed that the size of the crops grown through our system is about three times larger than that of natural light natural crops.

• Journal of Biosystems Engineering
• /
• 제25권3호
• /
• pp.213-220
• /
• 2000

Grafting of fruit-bearing vegetables has been widely used to increase the resistance to soil-borne diseases, to increase the tolerance to low temperature or to soil salinity, to increase the plant vigor, and to extend the duration of economic harvest time. After grafting, it is important to control the environment around grafted seedlings for the robust joining of a scion and rootstock. Usually the shading materials and plastic films are used to keep the high relative humidity and low light intensity in greenhouse or tunnel. It is quite difficult to optimally control the environment for healing and acclimation of grafted seedlings under natural light. So the farmers or growers rely on their experience for the production of grafted seedling with high quality. If artificial light is used as a lighting source for graft-taking of grafted seedlings, the light intensity and photoperiod can be easily controlled. The purpose of this study was to develop a prototype system for the graft-taking enhancement of grafted seedlings using artificial lighting and to investigate the effect of air current speed on the distribution of air temperature and relative humidity in a graft-taking enhancement system. A prototype graft-taking system was consisted by polyurethane panels, air-conditioning unit, system controller and lighting unit. Three band fluorescent lamps (FL20SEX-D/18, Kumho Electric, Inc.) were used as a lighting source. Anemometer (Climomaster 6521, KANOMAX), T-type thermocouples and humidity sensors (CHS-UPS, TDK) were used to measure the air current speed, air temperature and relative humidity in a graft-taking system. In this system, air flow acted as a driving force for the diffusion of heat and water vapor. Air current speed, air temperature and relative humidity controlled by a programmable logic controller (UP750, Yokogawa Electric Co) and an inverter (MOSCON-G3, SAMSUNG) had an even distribution. Distribution of air temperature and relative humidity in a graft-taking enhancement system was fairly affected by air current speed. Air current speed higher than 0.1m/s was required to obtain the even distribution of environmental factors in this system. At low air current speed of 0.1m/s, the evapotranspiration rate of grafted seedlings would be suppressed and thus graft-taking would be enhanced. This system could be used to investigate the effects of air temperature, relative humidity, air current speed and light intensity on the evaportranspiration rate of grafted seedlings.

• 한국환경과학회지
• /
• 제15권7호
• /
• pp.677-688
• /
• 2006

Currently, the application of $TiO_2$ photocatalyst has been focused on purification and treatment of wastewater. However, the use of conventional $TiO_2$ slurry photocatalyst results in disadvantage of stirring during the reaction and of separation after the reaction. And the usage of artificial UV lamp has made the cost of photocatalyst treatment system high. Consequently, we studied that solar light/$TiO_2$ film system was designed and developed in order to examine disinfection characteristics of sewage wastewater treatment. The optimum conditions for disinfection such as solar light intensity, characteristic of sewage wastewater, amounts of $TiO_2$ and comparison of solar ligth/$TiO_2$ systems with UV light/$TiO_2$ system was examined. The results are as follows: (1) photocatalytic disinfection process with solar light in the presence of $TiO_2$ film more effectively killed total coliform (TC) than solar light or $TiO_2$ film absorption only. (2) The survival ratio of TC and residual ratio of organic material (BOD, CODcr) decreased with remain resistant material. (3) The survival ratio of TC and residual ratio of organic material (BOD, CODcr) decreased with the increase of amounts of $TiO_2$. (4) TC survival ratio decreased linearly with increasing UV light intensity. (5) The disinfection effect of solar light/$TiO_2$ slurry system decreased more than UV light/$TiO_2$ film systems. (6) The disinfection reaction followed first-order kinetics. We suggest that solar light instead of using artificial UV light was conducted to investigate the applicability of alternative energy source in the disinfection of TC and the degradation of organic material.

• 한국전기전자재료학회논문지
• /
• 제28권2호
• /
• pp.142-147
• /
• 2015

The artificial light sources for growth of plant are usually high-pressure sodium lamp, metal haloids lamp, and fluorescent light; however, these light sources have relatively weaker Red and Blue lights that are necessary for growth of plants. Especially the effect of Photosynthetic Photon Flux Density (PPFD) is pointed out as the weakness. Meanwhile, LED light source can be selected by specific wavelength to greatly improve the effect of PPFD. In this regard, this paper aims to investigate the promotion of plant growth by measuring photosynthetic photon flux density (hereafter referred to as PPFD) according to changes in light quality of the LED light sources. Towards this end, LED light sources for plant growth were produced with 4 kinds of mono-chromatic lights and 6 kinds of combined lights by mixing red, blue, green and white lights. A comparative analysis was conducted to investigate the effects of optical properties and PPFD on plants (green leaf lettuce) using the produced light sources. The results monochromatic light has fastest growth rate, but plant growth conditions have poor. This being so, mixed light is suitable for the green leaf lettuce.

• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.11-20
• /
• 2011

PSALI is referred to the supplementary lighting for the interior lighting under the daily lighting situation, and pursuant to the pertinent regulations in energy savings design standard and others in recent architecture works, the importance thereof has been increasing gradually coupled with the energy performance index (EPI), energy savings plan and the like as well as expansion of submittal and implementation policies. However, this type of PSALI studies indeed have a number of limitations since it has surrounding environmental conditions in direction, season, region, climate, time, opening rate, window area ratio, actual index, reflection rate of finishing materials and others in the architecture work as well as frequent changes in interior lighting environment for variables in daily light volume flowing into the interior, and others. Therefore, this study has analyzed existing advance research cases to produce the actual-sized model and scaled-down model, and installed the artificial lighting of LED light source possible to reproduce with same capability on both models. As a result of comparison and analysis of the artificial lighting with the key light, it has certain level of error rate from the scaled down lighting device in certain rate and actual model butit was noticeably significant within specific scope.

• 생물환경조절학회지
• /
• 제22권3호
• /
• pp.228-233
• /
• 2013

본 실험은 식물공장시스템에서 인공광원인 백색 LED의 광도와 광주기에 따른 '선홍적축면'의 생육조건을 구명하고자 수행하였다. 그리고 각각의 챔버에 백색 LED를 설치 후 완전임의배치법으로 $20cm{\times}20cm$ 간격으로 재식하였다. 광도는 100, 200, $300{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$로 처리하였고, 광주기는 12/12, 18/6, 24/0(명기/암기)으로 처리하였다. 온도는 $21{\pm}2^{\circ}C$, 상대습도는 $60{\pm}10%$로 조절하여 22일간 재배하였다. 엽폭과 엽장, 생체중과 건물중, 총 안토시아닌 함량은 24/0(명기/암기) 처리에서 좋았다. 최대근장, 생체중과 건물중, 엽수는 100, $300{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$보다 $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ 처리에서 좋았다. 엽록소는 광주기 18/6과 24/0 처리 보다 12/12(명기/암기) 처리에서 높았다. 본 실험의 결과로 광도는 200, $300{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, 광주기는 12/12 또는 18/6(명기/암기) 처리를 하는 것이 좋을 것으로 판단된다.

• 조명전기설비학회논문지
• /
• 제29권1호
• /
• pp.22-30
• /
• 2015

Currently, in South Korea, 'Light Pollution Prevention Act by Artificial Lighting' has been enforced. For advertising lighting, it is limited based on only the light-emitting luminance. Luminance is a concept related to the glare. Not only the luminance of the light source, but also glare is affected depending on some situations like blinking, luminance contrast, background illuminance. This study conducted glare subjective evaluation with brightness, color, and blinking by looking at the LED lighting box. The results showed that the glare indexes were higher about 2 times in a decrease of background illuminance from 100lx to 0lx. The glare index of R, G, B light was higher than that of white light. The average glare index of the blue light was higher about 8 times compared to 2,700K. And the blink rate had little effect on the glare, but it affected the irritation. Therefore, the glare effect of light color and blinking needs to be considered for the standard of luminous environment.