• 한국자기학회지
• /
• 제2권3호
• /
• pp.251-256
• /
• 1992

고주파 마그네트론 스퍼터링에 의해 Co /Pd 인공초격자를 형성하였다. 형성시킨 Co /Pd 인공초격자의 조성변조를 소각 X-선회절 분석으로 확인하였으며, XRD 분석 결과 두 원소의 격자상수 차이로 인해 Co 격자 팽창이 일어남을 알 수 있었다. Co 층 두께가 8${\AA}$ 이하가 되면 Co /Pd 인공초격자는 수직자기이방성을 띠었으며, 특히 Co가 단원자층인 경우에는 보자력이 2350 Oe이었고, 자기이력곡선의 각형도 우수하였다. Co /Pd 인공초격자가 수직자기이방성을 가지는 원인은 Pd에 의해 Co 격자가 팽창되는 현상과 관계가 있으며, Pd 두께가 증가할수록 수직자기이방성이 커지는 것을 확인하였다. Co /Pd 인공초격자의 수직자기이방성 에너지와 Co 두께의 관계로부터 계면이방성 에너지와 부피이방성 에너지를 계산하였으며 이는 각각 0.29 ergs/$cm^2$와 -$6.9{\times}10^6$ ergs/$cm^3$이었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권1호
• /
• pp.1-10
• /
• 2018

The improvement of critical current properties of $REBa_2Cu_3O_{7-x}$ (REBCO) coated conductors by introducing artificial pinning centers (APCs) is examined with respect to the field-angle anisotropy, high-field performance and relaxation property with time. Nano-rods along the c-axis introduced by PLD method and isotropic nano-particles introduced by TFA-MOD method are treated. The theoretical analysis is also shown to understand the effect of APCs quantitatively. The effects of superconducting layer thickness that influences the high-field performance and relaxation property are also discussed. It is shown that the upper critical field, which is another important factor to determine the high-field property, can be improved by introduction of APCs through electron scattering at interfaces with the superconducting matrix. The optimum critical current property can be obtained by properly designing the morphology and number density of APCs and the superconducting layer thickness.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권1호
• /
• pp.12-24
• /
• 2020

This study was conducted to examine an artificial recharge system, which was considered to be an alternative for securing additional groundwater resources in a high-density greenhouse region. An injection well with a depth of 14.0 m was placed in an alluvial plain of the zone. Eight monitoring wells were placed in a shape of dual circles around the injection well. Aquifer tests showed that the aquifer was comprised with high-permeable layer with hydraulic conductivities of 1.5×10^-3~2.4×10^-2 cm/sec and storage coefficients of 0.07~0.10. A step injection test resulted in a specific groundwater-level rising (Sr/Q) values of 0.013~0.018 day/㎡ with 64~92% injection efficiencies. Results of the constant-rate injection test with an optimal injection rate of 100 ㎥/day demonstrated an enormous storage capacity of the alluvial aquifer during ten experimental days. To design an optimal recharge system for an artificial recharge, the high-permeable layer should be isolated by dual packers and suitable pressure should be applied to the injection well in order to store water. An anisotropy ratio of the alluvial aquifer was evaluated to be approximately 1.25 : 1 with an anisotropy angle of 71 degrees, indicating intervals among injection wells are almost the same.

• 한국지반공학회논문집
• /
• 제24권11호
• /
• pp.111-120
• /
• 2008

포항지역 일원에 분포하는 이암을 대상으로 암석의 파괴강도에 대한 유도이방성을 분석하기 위하여 인공절리면을 갖는 이방성 암석에 대한 일축 및 삼축압축시험을 수행하였다. 시험결과, 일축압축강도와 삼축압축강도의 최소치는 인공절리면의 각도 ${\beta}=30^{\circ}$에서 나타났으며, 이방성 유형은 어깨형태(shoulder type)를 보였다. 또한 일축압축시험에서의 이방율을 산정한 결과, $R_c=9.0$으로 나타나 매우 높은 이방성에 속한 반면, 삼축압축시험에서 이방율은 $1.29{\sim}1.98$ 정도의 낮은 이방성으로 나타났다. Ramamurthy(1985) 파괴규준식에 n 지수를 도입하여 일축압축시험결과를 분석한 결과 ${\beta}=0^{\circ}{\sim}30^{\circ}$에서는 n=1인 곡선과 ${\beta}=30^{\circ}{\sim}90^{\circ}$에서는 n=3인 곡선이 가장 적절한 값을 예측하는 것으로 나타났다. 또한 삼축압축시험결과를 Ramamurthy 파괴규준식을 적용하여 분석하기 위해 매개변수 산정에 관한 Ramamurthy 제안식에 일축압축강도에서의 이방율을 도입하여 제안식을 일부 수정하였다. 이를 이용하여 매개변수를 재산정하고 Ramamurthy 파괴규준식에 적용한 결과 전반적으로 실험치와 잘 일치되는 것으로 나타났다. 또한, Jaeger(1960), McLamore & Gray(1967) 및 Hoek & Brown(1980)의 파괴규준을 적용하여 이암의 파괴강도에 대한 이방성을 살펴보았다.

• 한국지반공학회논문집
• /
• 제16권1호
• /
• pp.75-81
• /
• 2000

일반적으로 자연상태의 흙은 이방성을 나타내며, 이러한 흙의 이방성이 응력-변형률 거동에 미치는 영향은 매우 크다. 따라서 본 연구에서는 인공신경회로망 모델을 이용하여 압밀응력비 변화에 따른 정규압밀점토의 응력-변형률 거동을 모델링하고 비배수전단강도를 예측하여 보았다. 이때 사용된 신경회로망은 일반화된 델타규칙으로도 불리우는 오차역전파 학습 알고리즘을 이용한 다층신경회로망이다. 신경회로망의 학습은 인공퇴적 점토시료를 이용, 연직압밀응력과 압밀응력비를 다르게 정규압밀시킨후 비배수전단시험을 실시하여 얻어진 시험 결과를 이용하였고, 학습된 신경회로망을 이용하여 학습시 제외되었던 압밀응력비 상태에서의 비배수전단강도를 추론하여 본 결과 예측치와 실측치가 잘 일치하였다. 검토결과 실측치와 추론치 사이에는 결정계수($r^2$) 0.973 이상의 높은 상관관계가 있음을 확인하였다. 따라서, 본 연구결과는 점토의 비배수전단강도를 예측함에 있어서 인공신경회로망모델의 적용 가능성을 보여주었다.

• 한국지반공학회논문집
• /
• 제19권3호
• /
• pp.15-22
• /
• 2003

지반의 실제 거동을 보다 정확하게 표현하기 위한, 응력의 비등방성 및 시간의존적(time-dependent) 거동의 적절한 묘사는 특히 점성토의 응력-변형률 관계를 나타내는 구성관계식에 있어서 중요한 관심사이다. 본 연구에서는 적은 모델정수로 응력의 비등방성을 묘사할 수 있는 소성 구성관계식과, 대표적 시간의존적 거동인 변형률 속도 효과를 간편하게 표현할 수 있는 변형률속도 의존적 구성관계식을 일반 점성이론에 입각하여 조합하였다. 결론적으로 제안된 하나의 비등방성 변형률속도 의존적 구성관계식은 비교적 모델정수가 적고, 변형률속도가 바뀔 때마다 모델정수 값을 다시 결정할 필요가 없다는 장점이 있다. 제안된 구성모델은 인위적으로 제작된 균질한 시료를 이용한 실내시험을 통하여 검증되었으며, 상세 거동 및 문제점을 고찰하였다.

• Carbon letters
• /
• 제1권2호
• /
• pp.76-81
• /
• 2000

Physical properties of artificial graphite electrodes were evaluated along three different directions; circumferential (X), radial (Y), and axial (Z) directions. Four kinds of commercial electrode products were used in this study for the evaluation; pole (AP) and nipple (AN) of manufacturer A, pole (BP) and nipple (BN) of manufacturer B. The mechanical, electrical, and thermal properties in X and Y directions were very similar to each other. In Z direction, however, the mechanical properties, including flexural strength and compressive strength, were higher, and electric resistance and thermal expansion were much lower than those in the other directions. The microstructures observed by optical microscope and scanning electron microscope revealed that the differences in properties by the measuring direction were caused by the preferential alignment of needle cokes along the Z direction. When comparing the properties of the electrode samples in the same direction, the mechanical properties mainly depended on the bulk density or porosity of the samples as well as preferential alignment of needle cokes.

• 한국재료학회지
• /
• 제23권2호
• /
• pp.149-153
• /
• 2013

Delamination crack detection is very important for improving the structural reliability of laminated composite structures. This requires real-time delamination detection technologies. For composite laminates that are reinforced with carbon fiber, an electrical potential method uses carbon fiber for reinforcements and sensors at the same time. The use of carbon fiber for sensors does not need to consider the strength reduction of smart structures induced by imbedding sensors into the structures. With carbon fiber reinforced (CF/) epoxy matrix composites, it had been proved that the delamination crack was detected experimentally. In the present study, therefore, similar experiments were conducted to prove the applicability of the method for delamination crack detection of CF/polyetherethereketone matrix composite laminates. Mode I and mode II delamination tests with artificial cracks were conducted, and three point bending tests without artificial cracks were conducted. This study experimentally proves the applicability of the method for detection of delamination cracks. CF/polyetherethereketone material has strong electric resistance anisotropy. For CF/polyetherethereketone matrix composites, a carbon fiber network is constructed, and the network is broken by propagation of delamination cracks. This causes a change in the electric resistance of CF/polyetherethereketone matrix composites. Using three point bending specimens, delamination cracks generated without artificial initial cracks is proved to be detectable using the electric potential method: This method successfully detected delamination cracks.

• Journal of Magnetics
• /
• 제11권4호
• /
• pp.182-188
• /
• 2006

The search for high-density recording materials has been one of most active and vigorous field in the field of magnetism. $FePt-L1_{0}$ nanoparticle has emerged as a potential candidate because of its high anisotropy. In this paper, we provide an overview of recent work at Argonne National Laboratory that contributes to the ongoing dialogue concerning the relation between structure and properties of the FePt nanoparticle system. In particular we discuss the ability to control structure and properties via dosing with Cr. Cr-dosed FePt films were grown via molecular beam epitaxy and annealed at $550^{\circ}C$ in an ultrahigh vacuum chamber, and were studied with the surface magneto-optic Kerr effect (SMOKE), scanning electron microscopy (SEM) and x-ray magnetic circular dichroism (XMCD). We found that small dosage of Cr helps to generate $L1_{0}$ phase FePt magnetic nanoparticles with small size, defined shape and regular spatial distribution on MgO (001) substrate. The nanostructures are ferromagnetic with high magnetic coercivity (${\sim}0.9T$) and magnetic easy axis in the desired out-of-plane orientation. We also show that controlling the lateral region where nanostructures exist is possible via artificial patterning with Cr.

• Carbon letters
• /
• 제15권2호
• /
• pp.142-145
• /
• 2014

Isotropic synthetic graphite scrap and phenolic resin were mixed, and the mixed powder was formed at 300 MPa to produce a green body. New bulk graphite was produced by carbonizing the green body at $700^{\circ}C$, and the bulk graphite thus produced was impregnated with resin and re-carbonized at $700^{\circ}C$. The bulk density of the bulk graphite was $1.29g/cm^3$, and the porosity of the open pores was 29.8%. After one impregnation, the density increased to $1.44g/cm^3$ while the porosity decreased to 25.2%. Differences in the pore distribution before and after impregnation were easily confirmed by observing the microstructure. In addition, by using an X-ray diffractometer, the degrees-of-alignment (Da) were obtained for one side perpendicular to the direction of compression molding of the bulk graphite (the "top-face"), and one side parallel to the direction of compression molding (the "side-face"). The anisotropy ratio calculated from the Da-values obtained was 1.13, which indicates comparatively good isotropy.