• 제목/요약/키워드: Arrival Traffic Flow Rate

검색결과 7건 처리시간 0.026초

Turning Point Analysis를 이용한 실시간 교통량 변화 검지 방법론 개발 (Methodology for Real-time Detection of Changes in Dynamic Traffic Flow Using Turning Point Analysis)

  • 김형주;장기태;권오훈
    • 대한교통학회지
    • /
    • 제34권3호
    • /
    • pp.278-290
    • /
    • 2016
  • 연속교통류 운영 및 설계에서는 최대통과교통류율에 따른 교통류 상태변화 분석이 중요하다. 최대통과교통류율은 연속교통류 운영상태를 평가함에 있어 기준이 되고 있으며, 병목현상과 같은 지 정체 발생시 최대통과교통류율이 급격히 감소하게 된다. 현재까지 이러한 연속교통류 운영과 관련된 다양한 연구들이 수행되었지만, 변화되는 교통량을 명확하게 식별하지 못하고 있다. 이에 본 연구에서는 교통운영 및 설계 등의 다양한 연구를 수행하는 데 있어 가장 중요한 실시간 교통량 변화 검지 방법론에 대한 연구를 실시한다. 이를 위하여 도시고속도로 자유로 구간의 24시간 레이더검지기의 시계열 자료를 이용하며, 교통류 상태 구분에는 통계적 기법의 일환인 터닝포인트 분석(Tunring Point Analysis, 이하 TPA)를 적용한다. TPA는 베이지안 접근법(bayesian approach)을 이용하며, 차량도착은 포아송 분포로 가정한다. 분석대상 구간에 대한 터닝포인트(Turning Point, 이하 TP)를 도출하였으며, 교통량이 변화되는 시점을 확인할 수 있었다. 또한 실시간 교통상태변화 검지를 위한 방법으로 TP지속시간을 설정하여 분석을 실시하였으며, 실시간으로 교통량의 변화를 검지하였다. 이는 기존의 직관적이고 경험적인 접근법의 한계를 극복할 수 있는 장점을 가지며, 실시간으로 교통량 변화를 식별할 수 있어 램프미터링(ramp-metering), 가변차로 등의 교통운영관리에 적용이 가능하다.

TRANSYT 모델의 내재 모개변수에 관한 연구 (A Study on TRANSYT Model-embedded Parameters)

  • 도철웅
    • 대한교통학회지
    • /
    • 제6권1호
    • /
    • pp.55-64
    • /
    • 1988
  • Prior to using any computer model, the program-embedded palameters showing significant differences from real world should be calibrated. This is especially true when the model is expected to be used fro various roadway and traffic condition. The calibration of TRANSYT model was conducted for the parameters of start-up delay, and lag, stop penalty(K), platoon dispersion factor, and saturation flow rate. The values of the parameters were obtained by theoretical methods from actual field measurements for discharging and arrival pattern. The sites elected for the study was an intersection of Dongil-Ro and Hwarang-Ro, and a 334 meter downstrean section from the intersection stop line on westbound Hwarang-Ro. The study results showed that the start-up delay was 2.6 sec, end lag was 1.0 sec, saturation flow rate was 2287 pcphgpl, platoon dispersion factor was 0.2-03, and stop penalty(K) was 32. However, since these parameters re apt to depend on traffic and roadway condition, it is doubtful whether the obtained values will be applicable to the area-wide situation other than this particular site.

  • PDF

독립교차로의 통행시간 기반 신호제어 알고리즘 (Traffic Signal Control Algorithm for Isolated Intersections Based on Travel Time)

  • 정영제;박상섭;김영찬
    • 대한교통학회지
    • /
    • 제30권6호
    • /
    • pp.71-80
    • /
    • 2012
  • 본 연구에서는 개별차량의 구간통행시간 정보를 이용한 독립교차로의 실시간 신호제어 알고리즘을 개발하였다. DSRC와 같이 개별차량의 ID와 검지시각 정보를 수집할 수 있는 검지체계를 적용하였으며, 개별차량의 통행시간 정보로 부터 도착교통류율, 지체, 적색시간 변화에 따른 지체 변화량을 산정하기 위한 모형을 정립하였다. 통행시간기반 신호제어 알고리즘은 교차로 지체를 최소화 시키기 위한 현시별 적색시간 변화량을 결정하며, 선형계획모형을 적용하여 신호시간의 최적화 과정을 수행한다. 알고리즘의 효과평가를 위해 CORSIM과 RUN TIME EXTENSION을 적용한 미시적 시뮬레이션 분석을 시행하였으며, 이동류의 포화상태를 확인하여 지체 최소화를 위한 신호시간이 산정됨을 확인하였다. 또한 Probe 차량의 비율에 따라 이동류의 지체추정 성능을 확인하였으며, 특정 시나리오에 한정된 결과이나 40% 이상 Probe 차량 비율이 확보되는 경우 효과적 신호제어가 가능함을 확인하였다. 최근 국내 교통관리분야에서는 하이패스, 첨단교통관리시스템(ATMS), 광역교통정보사업(UTIS) 등 개별차량의 구간정보를 수집할 수 있는 검지체계가 급격히 확산되고 있으며, 본 연구는 실시간 신호운영 분야에서 검지체계의 변화를 수용하기 위한 방안으로서 새로운 형태의 신호제어 방법론을 제시하였다는데 의의가 있겠다.

이질적 ON/OFF 원을 입력으로 한 다중화 장치의 셀 손실률 계산을 위한 하이브리드 방법 (Hybrid Method to Compute the Cell Loss Probability in a Multiplexer with the Superposition of Heterogeneous ON/OFF Sources)

  • 홍정식;김상백
    • 산업공학
    • /
    • 제12권2호
    • /
    • pp.312-318
    • /
    • 1999
  • This paper considers the cell loss probability(CLP) in a multiplexer with the superposition of heterogeneous ON/OFF sources. The input traffic is composed of k classes. Traffic of class i is the superposition of M_(i) ON/OFF sources. Recently, the method based on the Markov modulated deterministic process(MMDP) is presented. Basically, it is the discretized model of stochastic fluid flow process(SFFP) and gives the CLP very fast, but under-estimates the CLP especially when the value of estimated CLP is very low. This paper develops the discretized model of Markov modulated Poisson process(MMPP). It is a special type of switched batch Bernoulli process(SBBP). Combining the transition probability matrix of MMDP and SBBP according to the state which is characterized by the arrival rate, this paper presents hybrid algorithm. The hybrid algorithm gives better estimate of CLP than that of MMDP and faster than SBBP.

  • PDF

폭주회피를 위한 큐 관리 기반의 패킷 탈락 알고리즘 (A Packet Dropping Algorithm based on Queue Management for Congestion Avoidance)

  • 이팔진;양진영
    • 인터넷정보학회논문지
    • /
    • 제3권6호
    • /
    • pp.43-51
    • /
    • 2002
  • 본 논문은 능동적인 큐 관리를 이용한 새로운 패킷 탈락 알고리즘에 대해 연구이다. 능동적인 큐 관리 기법은 기존의 Drop Tail과 다른데, Drop Toil은 버퍼 오버플로우가 발생하면 패킷 탈락되는 반면, 능동적인 큐 관리 기법인 RED는 폭주가 발생하기 전에 패킷이 탈락된다는 것이다. 그러나 능동적인 큐 관리 기법은 버퍼 크기가 충분히 크지 않을 때 높은 패킷 손실률을 초래한다. 폭주를 탐지하고 무작위로 선택된 연결에 이를 통보함에 의한 글로벌 동기화와 공정성 문제를 야기하며, 최적의 평균 큐 길이를 찾기 위해서는 네트워크 트래픽 특성이 미리 알려져야 한다는 커다란 문제가 있다. 본 논문에서는 폭주제어를 위한 새로운 큐 관리 기법 기반의 효율적인 패킷 탈락 기법을 제안한다. 제안된 기법은 플로우별 도착률과 추정된 공정한 대역을 사용한다. 이를 이용하여 플로우 도착률과 링크 대역을 계산하기 위한 추정 알고리즘을 제안한다. 제안된 기법은 패킷 손실을 가져오는 패킷에 의한 큐 길이의 급속한 진동을 초래하지 않기 때문에 네트워크 성능을 향상시킬 수 있음을 보인다.

  • PDF

클라우드 경로탐색을 이용한 미래 교통정보 예측 방법 (A Study on Predictive Traffic Information Using Cloud Route Search)

  • 김준현;권기욱
    • 한국측량학회지
    • /
    • 제33권4호
    • /
    • pp.287-296
    • /
    • 2015
  • 최근 내비게이션에서는 실시간 교통정보와 과거의 교통정보를 가공하여 미래의 교통정보를 예측하는 패턴 교통정보를 같이 활용하여 빠른 길을 안내해주고 있다. 그러나 현재 사용되는 패턴 교통정보는 과거의 정보를 가공하여 교통정보를 예측하기 때문에 특별한 상황(유고, 날씨 등)에서는 예측이 정확하지 않는 문제점을 가지고 있다. 그래서 본 연구에서는 빠른 길을 찾기 위해 실시간으로 운전자들이 요청하는 경로탐색 데이터를 분석하여 가까운 미래 운전자들이 위치할 도로의 교통 혼잡도를 미리 파악하여 패턴 교통정보 보다 정확한 예측 교통정보를 제시하였다. 연구결과 첫째, 연구지역의 정체경로인 양재에서 마포간 차량속도 비교에서는 기존 상습정체 도로의 속도가중치 정확도가 3km/h에서 18km/h의 오차율이 발생하였지만, 본 연구의 Real 예측 교통 정보를 적용한 결과는 1km/h에서 5km/h의 오차율이 발생하였다. 둘째, 경로 품질에서 기존의 경로보다 최대 약 9분, 평균 약 3분 일찍 목적지에 도착하여 예측 교통정보 결과의 신뢰성을 입증할 수 있었다. 셋째, 기존의 경로탐색 결과 보다 혼잡도를 미리 예측하여 혼잡이 발생할 도로에 대해 회피되는 경로탐색 결과를 도출할 수 있었다. 따라서 본 연구결과의 경로탐색 비교를 통해 교통량에 대한 예측정보를 획득할 수 있었으며 이를 활용하여 실시간 빠른 길 탐색이 가능하고, 향후 교통 흐름을 분산 시키는데도 도움이 될 것으로 판단된다.

항만관련문제의 시스템적 고찰 부산항 물류시스템의 실태분석 (A Systematic Approach to Port related Problems An Analysis on the Actual Condition of physical Distribution System of Pusan port)

  • 이철영;문성혁
    • 한국항만학회지
    • /
    • 제2권1호
    • /
    • pp.7-28
    • /
    • 1988
  • From the viewpoint of physical distribution, the port transport process can be regarded as a system which consists of various subsystems such as navigational aids, quay handling, transfer, storage, information If management, and co-ordination with inland transport. The handling productivity of this system is determined by the production level of the least productive subsystem. So, a productivity analysis on the flow of cargoes through each subsystem should be made in order to achieve efficient port operation. The purpose of this paper is to analyze the productivity of each subsystem in Pusan port, and to bring forward problems and finally to draw up plans for their betterment. Analyzed results on the productivity of each subsystem are as follows, i) It is known that the number of tugs with low HP should be increased by a few, the number of tugs with medium HP is appropriate, and the number of tugs with high HP is in excess of that necessary. ii ) In the case of container cargoes, it is found that the transfer and storage systems in BCTOC have the lowest handling capability, with a rate of $115\%$, leading to bottle-necks in the port transport system, while the handling rate of the storage and quay handling systems in general piers is in excess of the inherent capability. iii) In the case of the principal seaborne cargoes passing through general piers, there is found to be a remarkable bottle-neck in the storage system. In the light of these findings, both the extension of storage capability and the extension of handling productivity are urgently required to meet the needs of port users. Therefore, iv) As a short-term plan, it is proposed that many measures such as the reduction of free time, the efficient application of ODCY, etc must be brought in and v) In the long-trun, even though the handling capability will accommodate an additional 960,000 TEU in 1991, the scheduled completion date of the third development plan of Pusan port, insufficiency of handling facilities in the container terminal is still expected and concrete countermeasures will ultimately have to be taken for the port's harmonious operation. In particular, the problem of co-ordination with inland transport and urban traffic should be seriously examined together in the establishment of the Pusan port development. As a method of solving this, vi) It is suggested that Pusan port (North port) should be converted into an exclusive container ternimal and overall distribution systems to the other ports for treating general cargoes must be established. vii) And finally, it is also proposed that the arrival time (cut-off time) of influx cargoes for exports such as general merchandise and steel product should be limited, with a view to securing cargoes suitable for the operational capability of BCTOC.

  • PDF