• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.250-254
• /
• 2002

In this paper, we design an optimized planar array structure with triangular lattice for side-lobe reduction using a genetic algorithm. A constraint optimization is implemented by optimally removing some outer array elements far from the array center. It is shown that only the proper array shape without optimizing the magnitudes and phases of each array antenna can give low side-lobe level with a slight main beam broadening.

• 한국전자파학회논문지
• /
• 제15권9호
• /
• pp.896-905
• /
• 2004

본 논문에서는 이동통신 기지국 안테나로 활용하기 위한 구형 빔 패턴을 갖는 평면 배열 안테나 설계 및 제작 그리고 실험에 대하여 기술하였다. 원하는 구형 빔 패턴을 형성하기 위해 종래에 많이 사용하던 sin(x)/x 전류 분포를 사용하지 않고 급전 회로망의 설계 제작이 용이한 진폭과 위상 성분의 전류 분포로 최적화하였다. 본 논문에서 설계하는 평면 배열 안테나는 직사각형 격자 배열 구조를 가지며, 16${\times}$8 배열 소자로 구성된다. 각 방사 소자는 선형 수직 편파와 동축 여기 구조를 갖는 단일 마이크로스트립 소자이며, 월킨슨 전력 분배기와 180$^{\circ}$ 링 하이브리드 결합기를 기본 소자로 하는 급전 회로망이 설계된다. 평면 배열 안테나는 방위각 방향으로 는 0.55 λ$_{ο}$의 소자 간격을 갖는 16 배열 소자에 의해 90$^{\circ}$ 구형 빔 패턴을 형성하고, 양각 방향으로는 0.65 λ$_{ο}$의 소자 간격을 갖는 8 배열 소자에 의해 $10^{\circ}$의 일반적인 정형 빔 패턴을 형성한다. 또한, 16${\times}$8 배열 안테나는 좌우 상하 대칭적으로 네 부분으로 나뉘어져 있으며, 128개의 방사 소자, 32개의 1-4 행 분배기, 4개의 1-8 열 분배기 그리고 1개의 1-4 입력 전력 분배기로 구성된다. 본 논문에서 제안한 평면 배열 안테나 구조의 전기적인 특성을 검증하기 위하여 1.92～2.17 GHz(IMT2000 대역)에서 동작하는 평면 배열 안테나 실험 시제품을 제작하였으며, 실험 측정 성능들은 시뮬레이션 성능들과 매우 유사함을 보여 주었다.

• 한국광학회지
• /
• 제12권1호
• /
• pp.55-60
• /
• 2001

광학적 Hough 변환 필터 배열을 이용하여 입력영상의 특징을 추출할 수 있는 방법을 제안한다. 여기서는 입력 영상의 부분들이 대용되는 필터 배열의 요소들에 의해 독립적으로 동시에 Hough 변환된다. 하나의 광학적 Hough 변환 필터를 사용하여 입력영상 전체에 대한 변환 결과를 얻는 기존의 방식에 비해, 제안한 방법은 입력 영상에 존재하는 선소 특징의 대략적 위치 정보를 함께 얻을 수 있고 복잡한 입력영상에 대해서도 광학적 정확성을 높일수 있다. 이 방식을 실험적으로 입증하기 위해 $5\times5$ Hough 변환 필터 배열을 제작하고 기초적인 실험을 수행하였다.

• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.274-279
• /
• 2007

This study focuses on the enhancement of maskless photolithography as well as the peptide synthesis application with single crystalline silicon micromirrors. A single crystalline silicon micromirror array has been designed and fabricated in order to improve its application to the peptide synthesis. A micromirror rotates about ${\pm}\;9^{\circ}$ at the pull-in voltage, which can range from 90.7 V to 115.1 V. A $210\;{\mu}m-by-210\;{\mu}m$ micromirror device with $270\;{\mu}m$ mirror pitch meets the requirements of an adequately precise separation for peptide synthesis. Synthetic 16 by 16 peptide array corresponds to the same number of micromirrors. The large size of peptide pattern and the separation facilitate biochip experiments using fluorescence assay. The peptide pattern has been synthesized on the GPTS-PEG200 surface with BSA-blocking and thereupon the background was acetylated to reject non-specific bindings. Hence, an averaged slope at the pattern edge has been distinguishably improved in comparison to patterning results from an aluminum micromirror.

• 한국통신학회논문지
• /
• 제22권5호
• /
• pp.981-989
• /
• 1997

In this paper, the 5-element active phased array antennas coupled through slotline between elements are designed and fabricated. A recent studies on the active phased array antennas using the transmission line coupling which can be designed to provide strong coupling and the appropriate coupling phase. But this sturucture has limitation of expanding in two dimensions for planar active phased array antennas and distortion of the radiation pattern caused by coupling network. Thus our work proposes the slotline coupling structure asthe broadband coupling network for the active phased array antenna. In experiment, 5-elements active phased array antenas have steering range from -30.deg. to 20.deg. off broadside as the free-running frequencies of end elements are controlled. The overall results show that the proposed slotline coupling structure is suited for the coupling network in the actie phased array antenna system. And the proposed coupling structire solves the expansion problem and eliminates the distortion of the radiation pattern caused by the spurious radiation of the transmission line coupling network. Thus thiscan be expanded to two dimensional coupling network for the planar active phased array antenna system.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.347-352
• /
• 2005

Scan Element Pattern(SEP) and Scan Impedance(SI) concepts are used to analyze the characteristics of open-ended waveguide array, which is the representative phased array antenna element in C-band and X-band. Transmit SEP's are calculated for 15$\sim$15 subarray and SI's are obtained by applying periodic boundary conditions for a unit cell of the given array condition. CST's MWS and Ansoft's HFSS are utilized for each analysis. Some relations are reviewed between the two results, which are based on mutual coupling effects. For validation purpose, an 8$\sim$8 subarray is constructed and tested. Transmit SEP measured in MTG's far-field range shows good agreement with the calculated transmit SEP.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 춘계학술발표대회
• /
• pp.106-108
• /
• 2017

본 논문에서는 휘어지거나 굴곡진 array인 3차원 conformal array의 beam pattern을 보정하고자 기존의 2차원에서 3차원으로 확장한 interpolation technique과 compressive sensing을 이용하여 3-D uniform rectangular array(3-D URA)에 적용하는 방법을 연구하였다. 시뮬레이션 결과는 compressive sensing이 interpolation technique보다 우수한 특성을 보여준다.

• 전자공학회논문지A
• /
• 제28A권10호
• /
• pp.791-798
• /
• 1991

In this paper, microstrip array antenna with the phase lock are designed to consist of main lobe and sidelobe with difference 21.97dB for sharp beam pattern using Tchebyscheff polynominals. Microstrip array antenna with phase lock of 0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$ are designed, to scan beam for 0$^{\circ}$, 6$^{\circ}$, 12$^{\circ}$ to be 1:2:2:1 for the relative current distribution. The designed microstrip array antenna with phase lock is measured in terms of various characteristics such as return loss, resonant frequency, radiation pattern, bandwidth, beamwidth, and the measurement value and theoretical value agreed with each other. Also, the patch array antenna with the relative current distribution is presented phase shift for beam scanning.

• 소음진동
• /
• 제10권1호
• /
• pp.123-128
• /
• 2000

This paper describes the optimization of the hexagonal array transducer using finite element method. The transducer consists of the disc type sensors. Three dimensional beam patterns of each element and the array transducer are analysed using the finite element code ATILA. Beam patterns were analyzed for the disc type transducer. To optimize beam patterns of the array transducer, Chebyshev polynomial weight is applied to each element. In case of applying optimized weight, a 30 degree width beam pattern is presented at 10kHz. This paper also includes the effect of rubber filling material instead of using the water inside the transducer array.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.84-90
• /
• 2013

The hydrogen or oxygen gas producted by electrolysis become many bubbles in the electrolyte, but exact data on the behavior of these bubbles in the separator of an electrolysis stack didn't become known. In this study, the flow visualization experiment on the behavior of bubbles in the flow pattern of the array type separator is performed by using of a visible alkaline electrolysis stack and a stereoscopic microscope. As the results, a fine size bubbles adhered to the surface of the flow pattern grow to large sized bubbles until each bubble's buoyance is lager than the sum of external force and weight. And then the large bubbles flow into the upper area of the separator. Bubbles adhered to the surface of the vertical flow pattern grow quickly than them adhered to the surface of the horizontal flow pattern. Also, he electrolysis efficiency is declined because many multi-size bubbles occupied the wide volume in the flow pattern.