• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.12-22
• /
• 2016

Convenience and safety are the key words for the automotive driving and various sensor technologies have been studied for enhanced perception of driving environments. In frequency modulated continuous wave (FMCW) radar systems, single antenna is enough for range and velocity detection of multiple targets. Multiple array antenna is needed for estimating direction of arrival(DoA). Using DoA estimation algorithm in time domain as in the conventional systems, it is difficult to distinguish vehicles lie in the same angle. In order to facilitate the enhanced angle estimation, DoA estimation algorithm is applied in frequency domain. In this paper, the method for applying multiple signal classification(MUSIC) algorithm in frequency domain is suggested and the performance is analyzed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.101-108
• /
• 2005

Inertial Navigation System has been used extensively to determine the position, velocity and attitude of the body. An INS is very expensive, however, heavy, power intensive, requires long setting times and the accuracy of the system is degraded as time passed due to the accumulated error. Global Positioning System(GPS) receivers can compensate for the Inertial Navigation System with the ability to provide both absolute position and attitude. This study describes a method to improve both the accuracy of a body positioning and the precision of an attitude determination using GPS antenna array. Existing attitude determination methods using low-cost GPS receivers focused on the relative vectors between the master and the slave antennas. Then the positioning of the master antenna is determined in meter-level because the single point positioning with pseudorange measurements is used. To obtain a better positioning accuracy of the body in this research, a wireless internet is used as an alternative data link for the real-time differential corrections and dual-frequency GPS receivers which is expected to be inexpensive was used. The numerical results show that this system has the centimeter level accuracy in positioning and the degree level accuracy in attitude.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.274-279
• /
• 2021

Since conventional massive antenna systems require too many RF chains, they have disadvantages of high implementation cost and complexity. To overcome this problem, hybrid precoding schemes have been proposed. But, they are still of high implementation cost and complexity because RF chains are connected to all antenna elements. In this paper, we consider massive MIMO systems with overlapped sub-array (OSA) structure and then, propose a hybrid precoding scheme. In the overlapped subarray structure, RF analog precoding matrix has a sparse structure where many elements of RF analog precoding matrix are zeros. Using this sparse property, we propose a GTP-based precoder design method for RF and baseband digital precoding. Through simulation, we show that the proposed scheme has more than 85% of the spectral efficiency of the fully-connected structure while having 20~30% of complexity of it.

• Journal of Advanced Navigation Technology
• /
• v.26 no.3
• /
• pp.166-171
• /
• 2022

In this paper, we propose an algorithm to improve DoA(direction of arrival) estimation performance of the subspace-based method by generating high robustness correlation matrix of the signals incident on the uniformly linear array antenna. The existing subspace-based DoA estimation method estimates the DoA by obtaining a correlation matrix and dividing it into a signal subspace and a noise subspace. However, the component of the correlation matrix obtained from the low SNR and small number of snapshots inaccurately estimates the signal subspace due to the noise component of the antenna, thereby degrading the DoA estimation performance. Therefore a robust correlation matrix is generated by arranging virtual signal vectors obtained from the existing correlation matrix in a sliding manner. As a result of simulation using MUSIC and ESPRIT, which are representative subspace-based methods,, the computational complexity increased by less than 2.5% compared to the existing correlation matrix, but both MUSIC and ESPRIT based on RMSE 1° showed superior DoA estimation performance with an SNR of 3dB or more.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.8
• /
• pp.599-607
• /
• 2018

This paper presents a ground-to-air bistatic radar system and its implementation algorithm, which resembles an SAR(synthetic aperture radar) reconstruction algorithm. Via cooperative working between a standoff transmitting radar and an array of ground based receiving radars, it detects and images moving targets under clutter in the air. In the proposed system, the whole receiving antenna aperture is synthesized by physical ground based radars, and thus, unlike conventional SAR, it does not require long illumination time of the target area. The reconstruction algorithm uses planewave approximation based polar format processing, which alleviates the requirement of positioning the receiving radars, which can cause grating lobes if not chosen properly. We derive a reconstruction algorithm including clutter suppression and discuss implementation issues, such as the resolution of a reconstructed image and the method of compensation for the irregularity of the receiving radars' positions. A simulation that validates the proposed algorithm is also shown.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.8
• /
• pp.576-582
• /
• 2018

In this paper, a planar equi-phase power divider is proposed using fixed phase shifters. As the integrability of a phased array antenna increases for accurate beam steering, a conventional method to excite equi-phase signals to all element antennas, extending the feedline, has spatial limitations. Therefore, the planar equi-phase power divider is designed using a defected ground structure with a planar phase shift function without intentional feedline extension. The defected ground structure has been considered for a low insertion loss and a controllable phase shift, whereas the power divider has been designed and implemented with a port-to-port isolation and a planar configuration.

• Journal of Broadcast Engineering
• /
• v.11 no.4 s.33
• /
• pp.521-532
• /
• 2006

Recently, many research initiatives have been underway to improve reception performance of ATSC based DTV signal in mobile channel by adopting multiple antennas. In this paper, we propose a new mobile channel model which can be applicable to any array geometry. And then we propose new channel estimation algorithm which uses PN5l1 sequence in field synch. The proposed algorithm is to estimate channel by correlating the input signal in If frequency band and finding maximum peak, which does not need complicated synchronization circuit. Finally, we propose new receiver structures which can be implemented at the front-end of the existing receiver with no modification. With computer simulation, we verify the performance of the proposed model and verify the performance of the receiver structure with computer simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.207-213
• /
• 2013

This study describes an omega-K algorithm for focusing bistatic synthetic aperture radar(SAR) data using bistatic-to-monostatic conversion. Bistatic SAR system considered in this study consists of a transmitting antenna and a physical array of several receiving antennas. The length of the physical array is identical to the SAR synthetic aperture. Unlike the monostatic case, an omega-K algorithm for the bistatic case is difficult to obtain the exact equation in the 2D wavenumber domain. The key of the proposed algorithm is converting the bistatic data into a monostatic one. The effectiveness of the proposed algorithm is proved by simulation and real measurement data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1713-1720
• /
• 2014

RFID technology has evolved from basic operation like the acquisition of tag IDs into a more complicated operation such as the simultaneous acquisition of tag IDs and their positions and recently, is raising the possibility of obtaining additional informations, which include their velocities, directions and distances. In this paper, we present a RFID system that can fullfil aforementioned advanced functions. In the proposed system, a tag transmits a sequence of FMCW pulses modulated by ID signals and a reader separates the tag signals in azimuth direction using an array antenna, followed by the FMCW demodulation from which distances, velocities as well as the tag IDs are extracted. We propose a receiver structure of the reader and theoretically analyze its operability. Moreover, its performance is examined by simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.653-663
• /
• 2014

To cope with an increasing amount of data traffic, research efforts are being made to maximize the data rate by reducing the interference between the transmission nodes. This paper also focuses on interference control schemes utilizing antenna sub-array beam-forming. The first scheme relies on horizontal beam rotation which utilizes three types of narrow beam patterns. Different beam patterns are applied to transmit signals in rotating fashion to control the interference. The second scheme is based on user-specific sub-array beamforming, which uses the precoding matrix based on users' location and controls the amount of interference in the multi-user environment. The performance of the proposed schemes is evaluated using the computer simulation to demonstrate the performance enhancement.