본 논문에서는 세라믹 다이어프램식 압력센서를 설계하기 전에 세라믹 다이어프램의 변위에 대한 최적 조건을 확립하기 위해 세라믹의 기계적 특성, 다이어프램의 두께와 직경 등을 변화시키면서 중심부와 변곡점 부근에서 압력에 대한 다이어프램의 변위를 시뮬레이션 하였으며 결과를 이용하여 세라믹 다이어프램을 이용하고 후막저항을 센싱 부분으로 하여 4가지 형태의 기하학적인 출력특성을 고찰하였다.
Objective: The objective of this study is to investigate the eruption pattern and root resorption of the bovine anterior dentition in relation to growth-related parameters based on dental maturity. Methods: A cross-sectional study was conducted on 110 bovine anterior mandibles by using standard radiography, cone-beam computed tomography (CBCT), and actual measurements. We determined the relationships between the stages of dental maturity by using a modification of Demirjian's method and various growth-related parameters, such as the activity of the root-resorbing tissue and mobility of the deciduous teeth. The correlation of growth-related parameters with interdental spacing and distal unusual root resorption (DRR) of the deciduous fourth incisor was assessed. The cause of mesial unusual root resorption (MRR) of the deciduous fourth incisor was determined on the basis of the arrangement of the permanent third incisor. Results: An independent t-test and chi-square test indicated significant differences in growth-related parameters associated with dental arch length discrepancy and factors related to the shedding of deciduous teeth between the low and high dental maturity groups. The samples with interdental spacing and DRR showed a larger sum of mesiodistal permanent crown widths and higher dental maturity than did the respective controls. Samples with MRR tended to show a lingually rotated distal tip of the adjacent tooth crown. Conclusions: Dental maturity has relevance to the interdental spaces and unusual root resorption of mixed dentition. The position of the adjacent tooth crown on CBCT may be correlated with the occurrence of unusual root resorption of the incisor.
Kim, Ae-Lee;Kim, Hye-Sun;Kim, Han-Kyeom;Won, Nam-Hee;Park, Mee-Ja;Koo, Bum-Hwan
The Korean Journal of Cytopathology
/
v.9
no.1
/
pp.45-54
/
1998
Fine needle aspiration cytology is considered as a useful diagnostic procedure in management of patients with breast lesions. This study was undertaken to evaluate the scoring system of Masood in the interpretation of breast aspirates, to establish the most useful cytologic criteria for the diagnosis of breast lesions, and to subclassify the benign breast diseases. To assess the feasibility of a cytologic grading system, 57 cases of benign breast disease, 61 cases of malignant breast disease were studied, respectively. The aspirates were evaluated for the cellular arrangement, the degree of cellular pleomorphism and anisonucleosis, and the presence of myoepithelial cells and nuceoli. Values ranging from 1 to 4 were assigned to each criterion and the sum of the individual values was made for each case. The presence of stroma, apocrine metaplasia, foamy histiocytes and inflammatory cells, background of the smear, and cellularity were also evaluated. Cut-off value of the scoring system of Masood between benign and malignant lesion was 15. Among the cytologic criteria, cellular arrangement, presence of myoepithelial cells, nucleoli, and stroma, status of chromatin pattern, and background of smear were useful criteria in the differentiation between benign and malignant lesions. Application of the scoring system of Masood does not always make the accurate diagnosis and the subclassification of benign breast disease.
Kim, Youngwan;Ra, Young-eun;Lee, Jonghak;Park, Jongkuk
Journal of IKEEE
/
v.24
no.2
/
pp.626-631
/
2020
In this paper, a study on beam synthesis technique of conformal array was performed. It is applied to various radar systems that can perform beam steering without deterioration of performance due to beam steering in a general linear arrangement. Unlike the beam synthesis technique in the planar linear array, the conformal array has a radiation element located on a curved surface, so it is necessary to compensate for a difference in length from the radaation element to the wave front surface. In addition, by calculating the offset angle for each radiation element and applying it during actual synthesis, it was possible to predict an accurate beam pattern. In this paper, length compensation and offset angle were calculated and applied to beam pattern synthesis to perform beam pattern comparison, and performance was compared through mathematical analysis.
Kalgutkar, Akshay Prakash;Banerjee, Sauvik;Rajanna, T.
Steel and Composite Structures
/
v.42
no.4
/
pp.427-446
/
2022
Cutouts in the beams or plates are often unavoidable due to inspection, maintenance, ventilation, structural aesthetics purpose, and sometimes to lighten the structures. Therefore, there will be a substantial reduction in the strength of the structure due to the introduction of the cutouts. However, these cutouts can be reinforced with the different patterns of ribs (stiffener) to enhance the strength of the structure. The present study highlights the influence of the elliptical cutout reinforced with a different pattern of ribs on the stability performance of such stiffened composite panels subjected to non-uniform edge loads by employing the Finite element (FE) technique. In the present formulation, a 9-noded heterosis element is used to model the skin, and a 3-noded isoparametric beam element is used to simulate the rib that is attached around a cutout in different patterns. The displacement compatibility condition is employed between the plate and stiffener, and arbitrary orientations are taken care by introducing respective transformation matrices. The effect of shear deformation and rotary inertia are incorporated in the formulation. A new mesh configuration is developed to house the attached ribs around an elliptical cutout with different patterns. Initially, a study is performed on the panels with different stiffener schemes for various ply orientations and for different stiffener depth to width ratios (ds/bs) to determine an optimal stiffener configuration. Further, various parametric studies are conducted on an obtained optimal stiffened panel to understand the effect of cutout size, cutout orientation, panel aspect ratio, and boundary conditions. Finally, from the analysis, it can be observed that the arrangement of the stiffener attached to a panel has a major impact on the buckling capacity of the stiffened panel. The stiffener's depth to width ratio also significantly influences the buckling characteristic.
The purpose of this study is to analyze the expression method according to the planning of townhouse and the healing method that affects residents for communicating with natural environment, in order to propose resident-focused communication with nature for healing. The results are as follows. First, the expression of nature elements can be divided into 'direct' and 'indirect' and healing effects through nature can be divided into 'body' and 'psychology'. The healing method of residents through nature was classified into physical and psychological healing through openness, familiarity, comfort, and stability. Second, as an expression method according to townhouse planning, the arrangement plan induced active communication with nature through the arrangement according to topography and a common garden. In terms of construction plan, a bigger window or door than that of other residential spaces was installed on a wall, ceiling or opening to directly bring the nature of outside visually for more communication. Third, with regard to healing methods of townhouse, 'openness' which reduces depression and increases self-esteem, expands the view of residents. 'Familiarity', the healing method that can relieve the fatigue of eyes and bring psychological warmth and comfort, makes us feel familiar through the pattern and texture of woods and stones that are natural materials. 'Comfort' which heals residents by creating an outside space and bringing the nature elements through a huge window can provide psychological healing such as eased tension in daily life as well as physical healing such as vitamin D synthesis and the recovery of physiological function. Also, 'Stability' gives a comfortable feeling by applying the colors of finishing materials inside or seeing the colors of surrounding nature as it is through big windows. Finally, in order to support the results of this study more objectively, a follow-up study conducting a survey on the residents of townhouse is needed.
Journal of the Korean Society of Marine Environment & Safety
/
v.26
no.7
/
pp.767-776
/
2020
Due to the recent climate change caused by global warming, weather changes in a different pattern from the past have occurred, and the increase in seawater temperature has led to an increase in the size and intensity of typhoons. Accordingly, there is an increasing need for bitts that can be used to secure mooring safety of the ship when a sudden gust occurs. Based on 12 scenarios of a mooring safety evaluation program, this study analyzed the criteria for arranging bollard and bitt, and analyzed the sensitivity of mooring safety when using storm bitts. As a result of the evaluation, it was analyzed that the mooring factor value decreased compared to the general mooring line arrangement when the fore and stern breastline were added to the bitts for gusts. The results of this study can be used as basic data for proposing storm bitts arrangements for gusts in consideration of the characteristics of berth ships and ports. From the perspective of ship operators, storm bitts at the pier will be an effective method for securing the ship's mooring safety in case of a gust of wind.
Journal of Advanced Marine Engineering and Technology
/
v.32
no.1
/
pp.82-93
/
2008
The flowfield behind two cylinders and flow-induced noise generated from the cylinders in various arrangement are numerically investigated based on the finite difference lattice Boltzmann model with 21 velocity bits. which is introduced a flexible specific heat ${\gamma}$ to simulate diatomic gases like air. In an isolated cylinder with two type of mesh. some flow parameters such as Strouhal number $S_t$ and acoustic pressure ${\Delta}p$ simulated from the solution are given and quantitatively compared with those provided the previous works. The effects of the center-to-center pitch ratio $L_{cc}/d=2.0$ in staggered circular cylinders as shown in Fig. 1 and angles of incidence ${\alpha}=30^{\circ}(T_{cc}/d=0.5)$, $45^{\circ}(T_{cc}/d =0.707)$ and $60^{\circ}\;(T_{cc}/d=0.866)$, respectively, are studied. Our analysis focuses on the small-scale instabilities of vortex shedding, which occurs in staggered arrangement. With the results of drag $C_d$ and lift $C_l$ coefficients and vorticity contours. the mechanisms of the interference phenomenon and its interaction with the two-dimensional vortical structures are present in the flowfields under $Re\;{\le}\;200$. The results show that we successively capture very small pressure fluctuations, with the same frequency of vortex shedding, much smaller than the whole pressure fluctuation around pairs of circular cylinders. The upstream cylinder behaves like an isolated single cylinder, while the downstream one experiences wake-induced flutter. It is expected that, therefore, the relative position of the downstream cylinder has significant effects on the flow-induce noise, hydrodynamic force and vortex shedding characteristics of the cylinders.
Journal of Advanced Marine Engineering and Technology
/
v.35
no.2
/
pp.264-270
/
2011
The Characteristics of the flowfield around three circular cylinders in tandem arrangement was investigated by PIV. Strouhal numbers, vorticity, velocity vectors and velocity profiles were observed at centre-to-centre space ratios of P/D=1.25~3.75, and Reynolds number of Re=$3.0{\times}10^3{\sim}5.0{\times}10^3$. As the results the Strouhal numbers measured in the rear region of 3rd the cylinder were distinguished three kind of regions with the space ratios and The flow pattern in the wake of each cylinder was different according to these regions. The time averaged flow at region of each cylinder was almost stagnated and the size of the stagnated region was small in order of 1st, 2nd and 3rd cylinder. The direction of vortex at the front and rear region of 2nd cylinder was opposed each other with the small difference(${\alpha}= {\pm}5^{\circ}$) of the attack angle ${\alpha}$.
Purpose: The purpose of this study was to determine the essential factors for prompt arrangement of angio-embolization in patients with pelvic ring fractures. Methods: A total of 62 patients with pelvic ring fractures who underwent angio-embolization in Dankook University Hospital from March 2013 to June 2018 were retrospectively reviewed. There were 38 men and 24 women with a mean age of 59.8 years. The types of pelvic ring fractures were categorized according to the Tile classification. Patient variables included sex, initial hemoglobin concentration, initial systolic blood pressure, transfused packed red blood cells within 24 hours, Injury Severity Score (ISS), mortality rate, length of hospital stay, and time to angio-embolization. Results: The most common pelvic fracture pattern was Tile type B (n=34, 54.8%). The mean ISS was $27.3{\pm}10.9$ with 50% having an $ISS{\geq}25$. The mean time to angio-embolization from arrival was $173.6{\pm}89minutes$. Type B ($180.1{\pm}72.3minutes$) and type C fractures ($174.7{\pm}91.3minutes$) required more time to angio-embolization than type A fractures ($156.6{\pm}123minutes$). True arterial bleeding was identified in types A (35.7%), B (64.7%), and C (71.4%). Conclusions: It is important to save time to reach the angio-embolization room in treating patients with pelvic bone fractures. Trauma surgeons need to consider prompt arrangement of angio-embolization when encountering Tile type B or C pelvic fractures due to the high risk of true arterial bleeding.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.