• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.1
• /
• pp.42-53
• /
• 2003

The purpose of this study is to evaluate the biotope structure of the city center area of Jung-gu for nature experiences and recreation purposes. Jung-gu is the most extremely and rapidly urbanized area of Daegu. This study was conducted under the assumption that the biotope structure of a city center area would be different from the urban area. The results of this study are as follows: 1) There are 11 biotope type groups as designated as commercial and work-area biotope type group, and 41 detailed biotope types designated as commercial areas with a lack of greenspace biotope type. 2) The commercial and work area biotope type group has the largest area with 34% of the total area, and the square biotope type group has the smallest area with 34% of total area. 3) The result of primary biotope evaluation is that there are 12 biotope types that have greater than third grade, apart from the biotope type of park that includes natural vegetation. The first grade of biotope type has not appeared in this area, however, the fifth grade of biotope type has 20 biotope types with the biotope type of construction work area (JA). 4) The results of the secondary biotope evaluation are 1 biotope for la, 9 biotopes for 2a, 9 biotopes for 2b, 14 biotopes for 2c and no biotope for 2a. This study suggests that a detailed investigation and improvement plan for high-value biotope areas in the city center area must be continued.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.65-71
• /
• 2005

Area type is often used in freight demand analysis and logistics planning models. For example, in freight transportation planning. area type variable is most often commonly used in freight generation (attraction) model. Yet a reliable, forecastable and measurable definition or area type is generally not documented. In fact, there is little literature on the subject of predicting area type in the context of freight planning models. This can be troublesome when applying models to long-range logistics planning where significant changes in population and employment result in changes in the general character of an area. Through the use of Discriminant Model, GIS (Geographic Information System) analysis and Delphi methods, this paper presents the successful exploration for a quantifiable means of determining area type.

• Korean Institute of Interior Design Journal
• /
• no.13
• /
• pp.18-24
• /
• 1997

Museums after '70's shows remarkable development in public area as well as exhibiiton area. One of the main changes in recent museums is to extend the concept of circulatin area, which regarded solely as a corridor connecting exhibition areas, as a multiple function area with various service facilities. This study aims to outline atypological classification of exhibition area considering with circulation area in museum. On the base of two principal types of exhibition area, that is room type vs open plant type, 30 representative worldwide museums are analyzed and four different types are identified as a result. 1) Loop type as a rotating structure of serial exhibition rooms 2) Cluster type which produce complicated circulation with rooms lied one upon another 3) Centrum type which is specially available to multistory exhibition area 4) Loft type with maximum flexibi쇼 and accessbility.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.9 no.1
• /
• pp.35-41
• /
• 2003

The evaluation of economy of wards is based on the building area. The parameters are nursing area per bed, occupied area per patient, and the portion of movement area. Three areas such as patient area, nurse area, and corridor area are devided. The results of analysis are as follows. At first, allocation of patient area has the highest priority. Even though nurse area is small, the patient area is relatively large. Secondly, the patient area is mostly determined by the type of rooms, such as single, double, etc.. Finally, the type of alley on the floor is important to economy. The single corridor type is the most economical followed by the double corridor type. the single loaded type shows the worst economy.

• Journal of dental hygiene science
• /
• v.22 no.4
• /
• pp.199-205
• /
• 2022

Background: The use of dental floss is associated with a reduction in dental caries and periodontal disease. According to personal preference, not only thread type but also C type and Y type floss are used. Although the effectiveness of dental floss for removing dental plaque has been proven, plaque removal effect of C type and Y type floss has not been well reported. In this study, the plaque removal effect of C type and Y type floss compared to thread type floss was experimentally verified. Methods: Thread type, C type and Y type floss were used to remove dental plaque. Ten people in each flossing group participated, and by applying dental floss to the 6 incisors of the maxilla and mandible, the degree of dental plaque was analyzed by QLF-D. To evaluate the removal degree of dental plaque before and after flossing, Simple Plaque Score (SPS), Area R30, Area R70, and Area R120 score were measured. Results: In the analysis using the Area R30 fluorescence score of the QLF-D system, the degree of plaque removal according to the application of dental floss was effective in all the thread type (p=0.018), C-type (p=0.012), and Y-type (p=0.012) floss groups compared to before the application of the floss. Among them, C type floss was more effective in removing plaque than thread type and Y type floss. However, the plaque removal effect between the three floss types was not significantly different in ∆SPS (p=0.674), ∆Area R30 (p=0.726), ∆Area R70 (p=0.504), and ∆Area R120 scores (p=0.423). Conclusion: Thread type, C type, and Y type floss were all effective in removing dental plaque, but there was no significant difference in dental plaque removal effect according to the type of floss.

• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1349-1358
• /
• 2014

This study suggests plan of green space management based on the result of research apprehending the characteristic through sorting types of city thermal environment targeting summer which thermal pollution is the most serious. Considering anthropogenic heat, development level of wind road, thermal environment, as a result of types of thermal environment process, it is appeared 36 types, and 10 types is relevant of this research subject. Type I-1, size of building is large, artificial covering area is wide, and thermal load of anthropogenic heat is high, type II-1, development condition of wind road is incomplete as IIlevel, entering cold air is difficult and thermal management and improvement is needed area. Type III-1, scale is large and it is area of origin of cold air, development level of wind road is mostly favorable, type III-2 is revealed as smaller scale than III-1, and small area of origin of cold air. Type IV, anthropogenic heat is $81{\sim}150W/m^2$, average, but development function of wind road is very favorable. Type V, large area of thermal load and the origin of cold air are distributed as similar ratio, and level of development function of wind road is revealed as II level. According to standard of type classification of thermal environment, as a result of suggesting plan of green space management and biotops area ratio, type I-1 is buffer green space and waterway creation, goal biotops area ratio 35%, type II-1 afforestation in site and goal biotops area ratio 40%, type III-1, preservation plan to display the current function continuously is requested. Type IV suggests afforestation of stream current, and type V suggests quantitative increase of green space and goal biotops area ratio 45%.

• Journal of Environmental Science International
• /
• v.12 no.10
• /
• pp.1025-1032
• /
• 2003

The purpose of this study is to analyze the characteristics of the urban landscape by CG(Computer Graphic) pictures and visibility analysis. In this study, the CG picture was created by using zoning data and DEM(Digital Elevation Model) on Chunchon city. The landscape type was classified into three by cluster analysis using the area rate of the element which constitutes CG picture. Visible analysis used DEM as fundamental data, and was performed by using GIS(Geographic Information System). And the frequency seen on viewshed was classified into five grades. The result of this study are as follows: 1. The area rate of the element which constitutes CG picture was high development restriction zone(43%) in type 1, green land area(39%) in type 2, and city area(24%) in type 3. 2. In the analysis results of GIS visibility analysis, it turns out that Euiam lake is important area on the landscape in all types. 3. The land use of high frequency seen on viewshed was water area, residential area in type 1, development restriction area, park area in type 2, and development restriction zone, water area in type 3.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.3
• /
• pp.428-433
• /
• 2004

The aim of this study was to investigate the histochemical parameters of muscle fibers, and to estimate the correlation between these histological parameters and carcass traits in pigs. A total of 230 crossbred Duroc$\times$(Yorkshire$\times$Landrace) pigs (149 gilts and 81 castrated male pigs) was evaluated. Carcass traits (carcass weight, backfat thickness, and loin eye area), muscle fiber size (crosssectional area, diameter, and perimeter), muscle fiber number (density of fibers/$mm^2$ and total number of fibers), and fiber type composition (percentages of myofibers and relative areas of each fiber type) were evaluated. Mean cross-sectional area (CSA) and type IIB fiber CSA were positively correlated to carcass weight, backfat thickness and loin eye area. Mean fiber CSA was mostly related to type IIB CSA (r=0.98) as a result of the high percentage of type IIB fibers in the longissimus muscle. Correlations between fiber diameters and perimeters were also high, and showed similar results with CSA. Mean fiber density was negatively correlated to carcass weight (r=-0.24), backfat thickness (r=-0.18) and loin eye area (r=-0.27). To the contrary, total fiber number was positively correlated with carcass weight (r=0.27) and loin eye area (r=0.53). Carcass weight and loin eyZe area were not significantly related to muscle fiber composition. For backfat thickness, there was an opposition between type IIA percentage, which was positively related and type IIB percentage, which was negatively related. Fiber type composition of type I and IIA fibers were negatively correlated to that of type IIB fibers (r=-0.67 to -0.74). In the present study, carcass weight and loin eye area were positively correlated to CSA and negatively correlated to fiber density. But, these relationships were generally low. The fiber density was strongly affected by muscle fiber size and the total fiber number was affected either by CSA of muscle fiber and loin eye area. Fiber type composition was much more related to their numerical abundance than their CSA.

• Journal of Technologic Dentistry
• /
• v.18 no.1
• /
• pp.117-127
• /
• 1996

This study was aimed to help the construction of esthetic dental prosthesis by investigation of the factors affecting on the atterition position and attrition angle of maxillary lateral incisors. Therefore 197 complete cast of maxillary and mandibualar extracted form the student of K. college were subjected for this study, and result throught the study are as follows. 1. None attrite rate of the maxiilary right lateral incisors was about 16.2% and that of the maxillary left lateral incisors was about 32.4% of examined teeth. 2. Throught mesiodistal attrition area 1) It showed that right lateral incisors was the most frequence in attrition of mesial area of incisal edge, and left lateral incisors was the most frequence in attrition of mesial and mid area of incisal edge. 2) It showed that square type arch was more frequence in attrition of all incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial area of incisal edge than it of average frequence of right lateral incisors, by dental arch type. 3) It showed that square type arch was more frequence in the attrition of all area and mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial and distal area of incisal edge than it of average frequence of left lateral incisal, by dental arch type. 4) Sex, vertical overlap, horizontal overlap, incisal guide angle, did not affect significantly to throughout mesiodistal attrition, statistically 3. Throughout labiolingual attrition quantity. 1) It showed that throughout labiolingual attrition quantity was more attrition in order of taper type arch < ovoid type arch < square type arch, by dental arch type. 2) It showed that throughout labiolingual attrition qauntity was more attrition when the length of horizontal overlap is shorter than it of other, by horizontal overlap. 3) Throughout labiolingual attrition quantity of right lateral incisors showed that male was more attrition than it of female. 4) Vertical overlap, incisal guide angle, sex on left lateral incisors did not affect significantly to throughout labiolingual attrition, statistically. 4. Attrition angle 1) It showed that average attrition anlge of right lateral incisors were $30{\pm}13.02$ degree, and it of left lateral incisors were $26{\pm}13.37$ degree. 2) It showed that taper type arch have a bigger attrition angle than it of average of lateral incisors, and square tape arch have a smaller attrition angle than it of average of lateral incisors, by dental arch type. 3) It showed that horizontal overlap of 2.1mm above have a bigger attrition angle than it of average, by horizontal overlap. 4) It showed that female have a bigger attrition angle it of male, by sex.

• Journal of Korean Society on Water Environment
• /
• v.24 no.3
• /
• pp.333-339
• /
• 2008

This study was carried out to assay the relationships between empirical factors and water quality in 23 agricultural reservoirs. Based on the trophic state index (TSI) deviation analysis, phosphorus in type II and III was the primary limiting factor on algal growth. BOD, COD, TP and chl.a concentration in type III reservoirs showed higher concentration than those of other types, while SS and TN concentration was no noticeable difference among three types. Characteristics of type III reservoirs showed large reservoir surface and drainage area, large surface area to volume (SAV) ratio, small drainage area to reservoir area (DA/RA) ratio, relatively old age, large paddy field and upland field to drainage area ratio (Mean 17.4%) and high generation and discharge loads compared to other types of reservoirs. In type I and II reservoirs, trends of BOD, TN, TP concentration in water column, were similar to those of the discharge load of pollutants. Although type II reservoirs generally showed low phosphorus discharge loads compared to type I reservoirs, TP and chl.a concentration in water column was greater than that of type I. Characteristics of type II reservoirs showed relatively large SAV ratio and old age compared to type I reservoirs and was similar to those of type III including eutrophic reservoirs.