• International Journal of Aerospace System Engineering
• /
• 제1권1호
• /
• pp.44-47
• /
• 2014

This study proposes a development for the nano silver adhesive, which is applicable to high efficiency LED(light-emitting diode) light. The important issue of LED light is heat exhaust from LED. Generally, the middle area of LED light is increased up to 380K. Therefore, the bottleneck between LED chip and heat sink are caused by high temperature. In this work, the adhesive material between LED Chip and heat sink was newly developed for improvement of bottleneck. The nano silver was adopted to solve heat problem of chip on board package for LED light. In order to evaluate the performance of the nano silver adhesive, the thermal analysis was performed. Moreover both adhesive performance and heat exhaust were verified through the prototype test. From the experimental test results, it is found that the developed nano silver adhesive has the high performance.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권3호
• /
• pp.189-193
• /
• 2001

Critical cell density (CCD), the maximum cell concentration without mutual shading in algal cultures, can be used as a new operating parameter for high-density algal cultures and for the application of the flashing light effect on illuminated algal cultures. CCD is a function of average cell volume and light illumination area. The CCD is thus proposed as an index of estimation of mutual shading in algal cultures. Where cell densities are below the CCD, all the cells in photobioreactors can undergo photosysnthesis at their maximum rate. At cell densities over CCD, mutual shading will occur and some cells in the illumination chamber cannot grow photoautotrophically. When the cell concentration is higher than the CCD, specific oxygen production rates under flashing light were higher than those under continuous light. The CCD was found to be a useful engineering parameter for the application of flashing light, particularly in high-density algal cultures.

• Journal of Electrochemical Science and Technology
• /
• 제1권2호
• /
• pp.69-74
• /
• 2010

Methodologies to improve photovoltaic performance of dye-sensitized solar cell (DSSC) are reviewed. DSSC is usually composed of a dye-adsorbed $TiO_2$ photoanode, a tri-iodide/iodide redox electrolyte and a Pt counter electrode. Among the photovoltaic parameters of short-circuit photocurrent density, open-circuit voltage and fill factor, short-circuit photocurrent density is the collective measure of light harvesting, charge separation and charge collection efficiencies. Internal quantum efficiency is known to reach almost 100%, which indicates that charge separation occurs without loss by recombination. Thus, light harvesting efficiency plays an important role in improvement of photocurrent. In this paper, technologies to improve light harvesting efficiency, including surface area improvement by nano-dispersion, size-dependent light scattering efficiency, bi-functional nano material, panchromatic absorption by selective positioning of three different dyes and transparent conductive oxide (TCO)-less DSSC, are introduced.

• 한국약용작물학회지
• /
• 제23권1호
• /
• pp.43-48
• /
• 2015

This study was carried out in order to investigate the photosynthesis response and leaf characteristics of Peucedanum japonicum growing in forest farming. The experiment was performed by leaf mold (pine tree and chestnut tree) and shading levels (0%, 35%, 50% and 75% shading). Light relative intensity was 100% (full sunlight), 60.3% (35% shading), 35.1% (50% shading), and 17.4% (75% shading) respectively. Light response curves of pine-leaf mold and chestnut-leaf mold were the highest in control (full sunlight) and these were getting lower in the higher shading level. Photosynthesis capacity and light saturation point were indicated higher in chestnut-leaf mold within the same shading level. As the shading level increased, maximum photosynthesis rate decreased. And apparent quantum yield was not indicated statistically significant difference from all treatment. Leaf area, leaf length and leaf width were significant higher in 35% shading and control under chestnut-leaf mold in all treatment. As the shading level increased, LAR (leaf area ratio), SLA (specific leaf area) and SPAD value decreased in pine-leaf mold and chestnut-leaf mold. As a result of surveying the whole experiment, P. japonicum is judged better growth and higher yield by maintaining 35% shading (relative light intensity 60%) under chestnut-leaf mold in forest farming.

• 한국약용작물학회지
• /
• 제22권4호
• /
• pp.295-300
• /
• 2014

This study was carried out to produce more Parasenecio firmus in forest farming. In order to achieve this purpose, it was surveyed the growth and photosynthetic characteristics of P. firmus. Relatively light intensity was controlled by 100%, 60%, 30% and 5% of full sunlight. Height was the highest under 5% of full sunlight. Shoot diameter was the highest in full sunlight. Fresh weight (leaf, stem, root and total) and dry weight (leaf, root and total) were the highest under 30% of full sunlight. S (leaf+stem)/R (root) ratio was the lowest under 30% of full sunlight and the highest under 5% of full sunlight. In leaf characteristics, leaf area, SLA and LAR were getting higher in the lower light level and the highest under 5% of full sunlight ($176.1cm^2$, $420.5cm^2{\cdot}g^{-1}$ and $123.5cm^2{\cdot}g^{-1}$). Especially, leaf area was surveyed higher under 30% of full sunlight in the next. Leaf thickness was getting lower in the lower light level and the lowest under 5% of full sunlight (overall 0.14~0.24 mm). As a result of surveying the whole experiment, P. firmus grows well under 30% and 5% of full sunlight in forest farming.

• 복식
• /
• 제34권
• /
• pp.109-120
• /
• 1997

The conservation of collections in muse-ums is an important aspect for our her-itage. The control of museum environment is a vital factor in the preservation of cool-lections. Inappropriate or fluctuating envi-ronmental conditions can cause irreparable damage to works of arts. In this research we investigated the ac-tual conditions of museum environment for old testiles using questionnaire and mea-sured dye fasing of old textiles on exhibi-tion for 2 months in a university museum the major results are as follows: 1. The control of temperature and rela-tive humidity is a vital factors I the preservation of old textiles in museum generally acceptable temperature and rel-ative humidity standards for old textiles are 18-23$^{\circ}C$ and 50-65% R. H and light level for textiles on exhibition should be limited to 30-50 lux. 2, In university museums the limate control system in exhibition and storage area is in an early stage. Therefore to minimize the deterioration of old textiles the best method of controlling the envi-ronment is to have centralized climate control system in sorage area as well as in display area. 3. Conservator is needed to maintain collections scientifically. Only professional conservator by combining scientific tech-nical and artistic training has the exper-tise needed to maintain the physical in-tegrity of old textiles. In order to solve the inferior environment of museums the staff should recognize the importance of the condition of exhibition and storage. 4. Old textiles are susceptible to damage by light and associated heat. Dyed textiles which have been exhibited under the light without any UV filter were faded notice-ably within two months of exhibition. Light levels for textiles on exhibition should be limited to 30-50 lux. It is de-sirable to use special light source that can absorb UV. and UV filter is also recom-mended to reduce photodegradation of old textiles.

• 한국안전학회지
• /
• 제29권2호
• /
• pp.24-30
• /
• 2014

There have been controversies over whether explosion hazardous area(EHA) should be classified for facilities which use lighter-than-air gases such as city gas, hydrogen and ammonia. Two view points are confronting each other: an economic piont of view that these gases are lighter than air and disperse rapidly, hence do not form EHA upon release into the atmosphere, and a safety point of view that they are also inflammable gases, hence can form EHA although the extent is limited compared to heavy gases. But various standards such as KS, IEC, API, NFPA do not exclude light gases when classifying EHA and present examples of EHA for light gas facilities. This study calculates EHA using the hypothetical volume in the IEC code where the hole sizes required for the calculation were selected according to various nominal pipe sizes in such a way to conform to the EHA data in the API code and HSL. Then, 25 leakage scenarios were suggested for 5 different pipe sizes and 5 operating pressures that cover typical operating conditions of light gas facilities. The EHA for the minimum leakage scenario(25 mm pipe, 0.01MPa pressure) was found to correspond to a hypothetical volume larger than 0.1 $m^3$(medium-level ventilation). This confirms the validity of classifying EHA for facilities using lighter-than-air gases. Finally, a computer program called HACPL was developed for easy use by light gas facilities that classifies EHA according to operating pressures and pipe sizes.

• 환경영향평가
• /
• 제7권2호
• /
• pp.89-102
• /
• 1998

The purpose of this study is to seek AEI(Air Environmental Indices), PSI(Pollutant Standard Index) and the urban air quality control goal(the best available alternative energy program) by assessing the best ratio of energy types used in urban enterprises, based on harmful health effect and air quality standard and costs. This study is focused on an urban area(Puchun), where area sourcees are associated with heavy traffic, large population, and its industrial sources with large emissions. In the first step, air modeling, estimation of AEI and PSI, and benefit-cost analysis were carried out. In the second step, we assessed that 660 scenarios about the ratio of B-C oil, light oil and LNG used in urban enterprises with regard to air quality and cost. In the third step, the best available alternative energy program was selected for the ratio of energy species(B-C oil, light oil and LNG) by using the lexicographic method. From the emission analysis, main source of $NO_2$ is identified as industries and air quality is evaluated according to the ratio of B-C oil, light oil and LNG used in urban enterprise. The modeling data of TSP, $SO_2$, $NO_2$, CO, $O_3$, by ISC3 and PBM are respectively $118{\mu}g/m^3$, 0.027ppm, 0.025ppm, 2.0ppm, 0.55ppm in indurstrial area. That data are close to Environmental Air Quality Standard. By means of sensitivity analysis, we obtained the difference in concentration between the areas(Nae-dong, Joong-dong) according to the ratio of B-C oil, light oil and LNG used in the industries. From the result of alternatives assessment the lowest AEI value and cost, the ratio of B-C oil, light oil and LNG are 2.5%, 20%, 77.5%, respectively.

• 한국정보통신학회논문지
• /
• 제22권1호
• /
• pp.140-146
• /
• 2018

최근 실내조명으로 사용하는 LED(Light Emitting Diode)와 무선통신 기술을 융합한 가시광통신이 주목받고 있다. 하지만 가시광 통신은 광 신호를 측정할 수 있는 커버리지 내에서만 통신이 가능하고, 비가시선 영역에서 통신이 단절되는 현상이 발생한다. 본 논문에서는 가시광 통신의 커버리지 확장과 비가시선 영역에서 통신 단절 현상 개선을 위해 VLC(Visible Light Communication) 릴레이 모듈을 제안한다. 제안하는 VLC 릴레이 모듈은 송신기로부터 전달받은 패킷을 VLC 릴레이 모듈 및 수신기로 전송한다. 1개의 VLC 송신기와 3개의 VLC 릴레이 모듈을 설치하여 실험을 진행하였으며, VLC 릴레이 모듈의 증가에 따른 통신 커버리지 확장과 비가시선 영역에서 통신 단절 현상 개선을 확인하였다. 또한, 이중 샘플링 기법을 사용하여 광 신호 측정 성능이 2.4배 향상됨을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권2호
• /
• pp.767-785
• /
• 2021

With the rapid development of information technology, it is now possible to analyze the spatial patterns of cultivated land and its evolution by combining GIS, geostatistical analysis models and spatiotemporal big data for the dynamic monitoring and management of cultivated land resources. The spatial pattern of cultivated land and its evolutionary patterns in Luoyang City, China from 2009 to 2019 were analyzed using spatial autocorrelation and spatial autoregressive models on the basis of GIS technology. It was found that: (1) the area of cultivated land in Luoyang decreased then increased between 2009 and 2019, with an overall increase of 0.43% in 2019 compared to 2009, with cultivated land being dominant in the overall landscape of Luoyang; (2) cultivated land holdings in Luoyang are highly spatially autocorrelated, with the 'high-high'-type area being concentrated in the border area directly north and northeast of Luoyang, while the 'low-low'-type area is concentrated in the south and in the municipal area of Luoyang, and being heavily influenced by topography and urbanization. The expansion determined during the study period mainly took place in the Luoyang City, with most of it being transferred from the 'high-low'-type area; (3) elevation, slope and industrial output values from analysis of the bivariate spatial autocorrelation and spatial autoregressive models of the drivers all had significant effects on the amount of cultivated land holdings, with elevation having a positive effect, and slope and industrial output having a negative effect.