• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1589-1595
• /
• 2010

In order to effective degradation of organic dye both under visible light or ultrasonic irradiation, the MWCNTs (multiwalled carbon nanotube) deposited with Fe and $TiO_2$ were prepared by a modified sol-gel method. The Fe/$TiO_2$-MWCNT catalyst was characterized by surface area of BET, scanning electron microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD), and energy dispersive X-ray (EDX) and ultraviolet-visible (UV-vis) spectroscopy. The low intensity visible light and low power ultrasound was as an irradiation source and the methylene blue (MB) was choose as the model organic dye. Then degradation experiments were carried out in present of undoped $TiO_2$, Fe/$TiO_2$ and Fe/$TiO_2$-MWCNT catalysts. Through the degradation of MB solution, the results showed the feasible and potential use of Fe/$TiO_2$-MWCNT catalyst under visible light and ultrasonic irradiation due to the enhanced formation of reactive radicals as well as the possible visible light and the increase of ultrasound-induced active surface area of the catalyst. After addition of $H_2O_2$, the MB degradation rates have been accelerated, especially with Fe/$TiO_2$-MWCNT catalyst, in case of that the photo-Fenton reaction occurred. The sonophotocatalysis was always faster than the respective individual processes due to the more formation of reactive radicals as well as the increase of the active surface area of Fe/$TiO_2$-MWCNT catalyst.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.13-17
• /
• 2013

In lighting system where several large-area organic light-emitting diode (OLED) lighting panels are involved, panel aging may appear differently from each other, resulting in a falling-off in lighting quality. To achieve uniform light output across large-area OLED lighting panels, we have employed an optical feedback circuit. Light output from each OLED panel is monitored by the optical feedback circuit that consists of a photodiode, I-V converter, 10-bit analogdigital converter (ADC), and comparator. A photodiode generates current by detecting OLED light from one side of the glass substrate (i.e., edge emission). Namely, the target luminance from the emission area (bottom emission) of OLED panels is monitored by current generated from the photodiode mounted on a glass edge. To this end, we need to establish a mapping table between the ADC value and the luminance of bottom emission. The reference ADC value corresponds to the target luminance of OLED panels. If the ADC value is lower or higher than the reference one (i.e., when the luminance of OLED panel is lower or higher than its target luminance), a micro controller unit (MCU) adjusts the pulse width modulation (PWM) used for the control of the power supplied to OLED panels in such a way that the ADC value obtained from optical feedback is the same as the reference one. As such, the target luminance of each individual OLED panel is unchanged. With the optical feedback circuit included in the lighting system, we have observed only 2% difference in relative intensity of neighboring OLED panels.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.189-192
• /
• 2006

The development of digital technology makes our life more convenient in our lives and its calmness promotes the qualify of our life. Digital-home-automation system lets indoor-living more free, safe and clear so that it really has come true our life style that considers our mind and healthy to be important. Moreover, LED light source that combines the semiconductor with the digital technology has been tried as a current indoor illumination. Also the introduction of the light which has a high technology, like LED light, has been required in living space. It shows that it is very important to have an illuminated- plan which is accepted as well-developed technology. This study deals with the investigation into the user satisfaction of the existing residential area illumination and the investigation into the user satisfaction of the LED illumination being supplied for commercial area now. In the result, the fact is investigated that the user wants the introduction of the digital technology In the illumination because of a backward the residental area illumination in the circumstances being digital gradually. The inconvenience of the illumination used now should be minimized and the development of the LED illumination is a way satisfying the desire. The intended illumination project of the residential area should be accomplished according to the lifestyle of a changing residence.

• Korean Institute of Interior Design Journal
• /
• v.14 no.6 s.53
• /
• pp.220-227
• /
• 2005

The development of digital technology makes our life more convenient in our lives and its calmness promotes the qualify of our life. Digital-home-automation system lets indoor-living more free, safe and clear so that it really has come true our life style that considers our mind and healthy to be important. Moreover, LED light source that combines the semiconductor with the digital technology has been tried as a current indoor illumination. Also the Introduction of the light which has a high technology, like LED light, has been required in living space. It shows that it is very important to have an illuminated-plan which is accepted as well-developed technology This study deals with the investigation into the user satisfaction of the existing residential area illumination and the investigation Into the user satisfaction of the LED illumination being supplied for commercial area now. In the result, the fact is investigated that the user wants the introduction of the digital technology in the illumination because of a backward the residental area illumination in the circumstances being digital gradually. The inconvenience of the illumination used now should be minimized and the development of the LED illumination is a way satisfying the desire. The intended illumination project of the residential area should be accomplished according to the lifestyle of a changing residence.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.145-152
• /
• 2016

The usage of LED(Light Emitting Diode) has been rapidly increased and energy efficient management of LED light system is regarded as an important technology to enhance the energy efficiency. In this paper, we design and implementation of LED lighting controller which can control the LED lighting by using the wire and wireless communication technology based on the LAN(Local Area Network) and PAN(Personal Area Network). The implemented system can reduce the cost of LED lighting installing and avoids complicated wiring problem. And it is possible to minimize power consumption through automatic or manual LED control that they wished. In experimental results, the implemented LED lighting controller was satisfactory for all of the desired functions.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.355-356
• /
• 2008

The light extraction efficiencies of GaN-based light-emitting diodes (LEDs) grown on differently patterned sapphire substrates were investigated by using the ray tracing method. It was found that angle of the pattern surface against the sapphire surface, the number of pattern per unit area were important structural factors for high extraction efficiency.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.476-487
• /
• 2001

In this study, three tree species (Populus euramericana, Kalopanax pictus and Quercus serrata) exhibiting different levels of shade tolerance were employed to investigate photosynthetic responses to the lower light condition on forest floors. Chlorophyll contents, spectral properties and photosynthetic characteristics were examined by using the tree species grown under high light intensity (PPFD $920{\mu}mol\;m^{-2}s^{-1}$) or low light intensity (PPFD $80{\mu}mol\;m^{-2}s^{-1}$). Plants grown under the low light intensity tended to have reduced leaf area, chlorophyll content per unit leaf area, light absorption and respiration in the shade intolerant tree species of P. euramericana. However, the shade tolerant species K. pictus and Q. serrata showed increased leaf area, chlorophyll content and net apparent quantum yield. Therefore, light absorption and light utilization efficiency were improved under the low light intensity. Also shade tolerant species maintained activities of photosystems and $CO_2$ fixation systems with little changes in low light intensity condition.

• Journal of KIISE
• /
• v.44 no.10
• /
• pp.1094-1104
• /
• 2017

In this paper, a motion image is detected based on the irregularity of lights. This motion image is extracted by modifying the reflected light region of the 3 way-diff algorithms. 3 way-diff algorithm extracts reflected light region using the 3-successive image. In this algorithm, The reflected light region is a region generated by light in the image production process and is finally created around all objects. The algorithm shows a process to extracting the region. This process is a simple operation, but doesn't have a defined formula for light. This paper judges that the reflected light region is a kind of noise at the 3 way-diff algorithms and defines the formula for extracting the reflected light region. It shows that compared with the proposed algorithm and existing algorithm through experiment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.7-8
• /
• 2006

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.339-346
• /
• 2007

This thesis has purpose of explaining that light is not only appreciated but also physically percepted in contemporary space design and examining effects of space experience through the physical perception. In keeping with such developments, light has been perceived as the object of another architectural tool in modern space design and has provided men with new experience by providing space image and function different from previous ones. With the expansion of the area of light, light has changed a space that is not a simple architectural factor into the essential concept that gives the architectural space image ! by combining it with architectural space, structure, form and materials throughout the whole process from the beginning to the completion. Through phenomenological approach, light is percepted and experienced by body movement, intervention of senses and memories, and passing of time. The percepted and experienced light brings increase of mutual understanding in space, activation and continuance of user's sensation, recreational experience by event occurrence and space experience effect thorough information from media.