• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.471-477
• /
• 2018

The purpose of this study is to develop an mobile augmented reality for students to learn bar placing work, which is increasingly utilized in the construction field. In order to improve the understanding of the structural drawing, a structural drawing is used as a marker image, and an augmented reality is realized by superimposing a virtual 3D bar placing model that is placed according to the structural drawing on the screen. In addition to the 3D modeling, the contents are developed so as to help students to learn the interpretation method of 2D drawings, the development and splices of reinforcing steel, bar fabricating practice according to KCI structural concrete design code, and the process of bar placing. The results show that the augmented reality is positively evaluated in terms of interface style, perceived usefulness, perceived ease of use, perceived enjoyment, attitude toward using, and intention to use. The augmented reality is worth to be introduced because it has advantages of visualization and interaction in terms of education.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.109-120
• /
• 2017

Groundwater seepage into a tunnel is one of the main causes triggering tunnel collapse and the consequent ground subsidence. Thus, it is important to estimate adequately the groundwater inflow rate and porewater pressure change during tunneling with time elapse. In current practice, Goodman's analytical solution (or image tunnel method) assuming homogeneous ground condition around a tunnel is commonly used for estimating groundwater inflow rate. However, the generally-used analytical solution for estimating groundwater inflow rate does not consider groundwater level drawdown and permeability change with depth, and the inflow rate can be overestimated in design phase. In this study, parametric study was performed in order to investigate the effect of groundwater level drawdown and permeability reduction with depth, and transient flow analysis was carried out for studying the inflow rate change as well as groundwater level and porewater pressure change around a tunnel with time elapse.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.1 s.108
• /
• pp.93-108
• /
• 2005

Fresh Kills is the largest landfill in the world located in the west side of Staten Island, New York. The landfill served as a storage area for New York City's trash for more than 50 years. After years of civilian and political pressure, state and local legislation decided its closure of landfill operation in Fresh Kills in March 2001. Soon after, Department of City Planning announced a Fresh Kills international design com-petition: 'Landfill to Landscape'. The winning entry was promised to be outline for the redevelopment of the 2,200 acre site which the size of three times Central Park. Forty-eight teams representing more than 200 offices from around world submitted proposals, from which six finalists that mostly led by landscape architects were selected. In December 2001, a jury of architects, landscape architects and city officials unanimously selected Field Operations as the winner. The plan, named Lifescape, visualizes the gradual 20-year transformation of the whole Staten Island into a 'natural lifestyle island' recognizing that Staten Island is home to coastal wetlands that shelter one of the most diverse ecosystems in the New York metropolitan area. It suggested that an ecologically reconstituted Fresh Kills could become the center of integrated parks and greenways system on the island otherwise fragmented. The project will be one of the largest and most ambitious undertakings in the metropolis in years developing a complex web of habitats and parklands on top of mountain of trash. This study tries to achieve two goals: One is to provide general explanations on the project, Lifescape, breaking down to its background, geographical context, design concepts and phased development plan. Another is to introduce the unique and innovative design approaches by Field Operations that are different from a conventional landscape architectural attitude. Since this project was well published through many magazines and newspapers, main focus will be upon aspects that differentiate this project from usual landscape projects. Conceptually Lifescape brought provocative notions on nature/culture relationship and the role of urban park as an active agency rather than just a green rest area. Also this project introduced pioneering graphics like plan collage, diagrammatic plan, phasing diagram and photo montage as vehicles conveying information, imagination and provocation. Witnessing the influence of the project gradually in the field of academic and practice in the States, this study is intended to become a constructive reference to similar landscape projects dealing with large and complex urban context in conjunction with restructure of contemporary city.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1253-1253
• /
• 2022

Although the construction industry is changing from a 2D-based to a 3D BIM-based management process, 2D drawings are still used as standards for permits and construction. For this reason, 2D deliverables extracted from 3D BIM are one of the essential achievements of BIM projects. However, due to technical and institutional problems that exist in practice, the process of extracting 2D deliverables from BIM requires additional work beyond generating 3D BIM models. In addition, the consistency of data between 3D BIM models and 2D deliverables is low, which is a major factor hindering work productivity in practice. To solve this problem, it is necessary to build BIM data that meets information requirements (IRs) for extracting 2D deliverables to minimize the amount of work of users and maximize the utilization of BIM data. However, despite this, the additional work that occurs in the BIM process for drawing creation is still a burden on BIM users. To solve this problem, the purpose of this study is to increase the productivity of the BIM process by automating the process of extracting 2D deliverables from BIM and securing data consistency between the BIM model and 2D deliverables. For this, an expert interview was conducted, and the requirements for automation of the process of extracting 2D deliverables from BIM were analyzed. Based on the requirements, the types of drawings and drawing expression elements that require automation of drawing generation in the design development stage were derived. Finally, the method for developing automation technology targeting elements that require automation was classified and analyzed, and the process for automatically extracting BIM-based 2D deliverables through templates and rule-based automation modules were derived. At this time, the automation module was developed as an add-on to Revit software, a representative BIM authoring tool, and 120 rule-based automation rulesets, and the combinations of these rulesets were used to automatically generate 2D deliverables from BIM. Through this, it was possible to automatically create about 80% of drawing expression elements, and it was possible to simplify the user's work process compared to the existing work. Through the automation process proposed in this study, it is expected that the productivity of extracting 2D deliverables from BIM will increase, thereby increasing the practical value of BIM utilization.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.92-101
• /
• 2016

There are many results in which acoustical conditions of a classroom play an important role for studying effects and academic achievement of students. However, there are very few guidelines or design proposals which could make appropriate acoustic environment when classrooms are built or renovated. The present study suggests various design proposals satisfying acoustic standards of classrooms based on theoretical calculation and acoustic field experiments. At first, minimum area of sound absorption was calculated which is required to satisfy the acoustic standard for domestic middle and high schools. Also, room acoustic measurements were carried out in order to investigate the acoustic performance of an existing classroom by changing interior finishing materials on ceiling and rear walls. As a result, it was revealed that reverberation time standard below 0.8 s can be acquired even if there is no sound absorption on ceiling which is a general practice executed in Korea. Specially, it was found that if partial area of ceiling would be treated as reflective with the ratio of sound absorption and reflection as 2:1, almost similar acoustic parameters of $C_{50}$, $D_{50}$, RASTI (Rapid Speech Transmission Index) and higher sound levels could be acquired in comparison with the case of entire sound absorption on ceiling.

• Journal of the Korea Concrete Institute
• /
• v.18 no.3 s.93
• /
• pp.339-346
• /
• 2006

The purpose of this study is to suggest a method to quantitatively predict long-term deformation of walls under an axial load concentrated to a part of the whole width. Four wall specimens were tested and three-dimensional finite element analyses were performed for these specimens. The finite element models established in this study were verified from the test results. On the basis of this verification, analysis parameters were selected considering various dimensions of walls and sectional area that a concentrated load is acting on, and finite element analyses for these parameters were carried out. The concept of the effective width coefficient was newly introduced as a method to predict the long-term behavior of walls, and a function that is able to optimally fit the effective width coefficients calculated from the analysis results for the selected parameters was found from regression analysis. The found function can be conveniently used in practice to predict the long-term behavior under loads concentrated to a local area of the whole width of walls.

• Journal of the Korea Convergence Society
• /
• v.10 no.6
• /
• pp.49-58
• /
• 2019

This study aims to analyze the relevance between oral health practices and oral discomforts of the elderly in an urban-rural area by surveying the elderly in welfare centers for the Elderly-continued oral health care program. The result shows that the elderly brush their teeth under regular oral care, and practice oral health life by scaling for the prevention of periodontal disease. Most of the elderly who drink alcohol have experienced implant care and tend to quit drinking after the treatment, and seemed to get their oral discomfort relieved. However, no relevance is found between implant experiences and social discomfort. Furthermore, the elderly who had bad breath expressed pronunciation, taste, pain and chewing discomfort, and social discomfort (P>.05). The educational level of the elderly did not have an impact on oral discomfort, but smoking, chewing and bad breath discomfort seemed to be related to social discomfort(P>.05). Therefore, since oral discomfort of the elderly causes social discomfort which decreases their quality of living, we recommend oral health departments of local governments to help the elderly maintain happy lives by continuing to study the practical use of reducing oral discomfort.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.6
• /
• pp.513-523
• /
• 2015

In steel moment frames constructed of H-shapes, strong-axis moment connections should be used for maximum structural efficiency if possible. And most of cyclic seismic testing, domestic and international, has been conducted for strong-axis moment connections and cyclic test data for weak-axis connections is quite limited. However, when perpendicular moment frames meet, weak-axis moment connections are also needed at the intersecting locations. Especially, both strong- and weak-axis moment connections have been frequently used in domestic practice. In this study, cyclic seismic performance of RBS (reduced beam section) weak-axis welded moment connections was experimentally investigated. Test specimens, designed according to the procedure proposed by Gilton and Uang (2002), performed well and developed an excellent plastic rotation capacity of 0.03 rad or higher, although a simplified sizing procedure for attaching the beam web to the shear plate in the form of C-shaped fillet weld was used. The test results of this study showed that the sharp corner of C-shaped fillet weld tends to be the origin of crack propagation due to stress concentration there and needs to be trimmed for the better weld shape. Different from strong-axis moment connections, due to the presence of weld access hole, a kind of CJP butt joint is formed between the beam flange and the horizontal continuity plate in weak-axis moment connections. When weld access hole is large, this butt joint can experience cyclic local buckling and subsequent low cycle fatigue fracture as observed in this testing program. Thus the size of web access hole at the butt joint should be minimized if possible. The recommended seismic detailing such as stickout, trimming, and thicker continuity plate for construction tolerance should be followed for design and fabrication of weak-axis welded moment connections.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.3
• /
• pp.25-37
• /
• 2013

The purpose of this study is to draw reasonable management plans to reinforce essence of Ohyundan(五賢壇: Five sprit tablets), a sacred site and monument of Jeju, by investigating and analyzing current status and problems of cultural landscape elements(e.g. architectural structures, installation, letters carved on the rocks, actual vegetation, etc.) while grasping placeness contained in Ohyundan through consideration of its history and transition process of Ohyundan a future being and shrine of Gyulrim Seowon(橘林書院) in Jeju. Results derived from research are summarized as follows. Ohyundan is noted due to its placeness in that it was a place for Gyulrim Seowon, Jeju's one and only Saaek Seowon(賜額書 院) and it was a symbolic space of exile culture in Jeju. As it is inferred from Gyulrim Seowon, which is dangho(堂號: clan name) of Seowon, orchards surrounding all over places are a signature landscape element that shows placeness of the past Ohyundan. Joduseok(俎豆石: altar stone), representing a core installation of Ohyundan and ancestral tablet of five spirits, created a refined place by putting up common stones around altar and founding blocked stones to wall. This refinement and thrift served basic mind of Neo-Confucianism, and led to of Jeju's Jonyang mind(spend-thrift mind). In conclusion, a practice plan is a prerequisite to restore essence of Ohyundan by actively excluding installations not suitable for placeness or overly designed such as Jeju Hyangrodang(a center for the elderly) and numerous monument houses. On the other hand, together with Joduseok, as letters carved on the rocks such as 'Jeungjoo Byukrip(曾朱壁立)' and 'Gwangpoongdae(光風臺)' and Yoocheonseok serve as a signature landscape that well shows mind of five spirits and teaching of Neo-Confucianism, and also a trace from a confucian viewpoint deeply rooted in Jeju, they are judged as a cultural landscape corresponding to the essence of place in Ohyundan which requires proactive preservation and plans for public relations. Together with this, although many different old big trees such as Pinus densiflora , Pinus thunbergii, Quercus variabilis, Celtis sinenis, Zelkova serrata and Rhus succedanea are a landscape element that increases sacred Ohyundan and commemorative value, now required is thorough entity tree management by assigning serial number on them as many of them were dead or removed resulting from transition process of land use. Further, to reinforce quality of site location belonging to Gyulrim Seowon, a prerequsite is to review plans that create Gyulrim at reinstalled site of building and raw land.