• Journal of the Korea Institute of Building Construction
• /
• v.14 no.2
• /
• pp.150-155
• /
• 2014

The success of construction projects is heavily dependent on the work ability of the field managers who manage the execution of projects. The work ability of field managers is influenced by various elements such as job stress and individual characteristics. The purpose of this study is to reveal the factors influencing the work ability of construction field managers in Korea. Work ability is evaluated bases on the Work Ability Index(WAI) developed by the Finnish Institute of Occupational Health, while job stress is measured using the Korean Occupational Stress Questionnaire Short Form developed by the Korean Occupational Safety & Health Agency. The results showed that field managers under higher job stress have lower work abilities. In addition, it is revealed that exercise or religious practice have a positive influence on work ability. This study will help to increase the work ability and enable the efficient management of organization at building construction sites.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.605-612
• /
• 2008

The shear wave velocity ($V_s$) has been commonly used to evaluate the dynamic properties of soil. The field $V_s$ probe (FVP) was already developed to assess the shear stiffness of a soft clay. The objective of this study is to investigate the disturbance effects of the FVP due to the penetration. The laboratory tests are conducted in a large-scale consolidometer (calibration chamber). The reconstituted clay is mixed at the water content of 110% using a slurry mixer. The FVP and down-hole test are carried out every 1cm interval to compare the data. In addition, two square rods with transducers are also implemented to get the reference value. The shear waves evaluated by the FVP, dow-hole tests, and reference rods are closely matched. This study suggests that the disturbance effect of the FVP due to the penetration into the soft clay soils is small enough and the $V_s$ evaluated by the FVP reflects well the in-situ characteristics. Furthermore, the combination of the FVP and down-hole test shows the possibility of hybrid equipment.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.171-175
• /
• 2010

Various soil characteristics for safe construction is necessary to understand the tests using the samples collected, and head in place an energy evaluation is conducted to evaluate the ground. In-Situ testing ground, Rod length and around the intrusive when the energy loss due to friction has been measured only in the head. Abstract The purpose of this agreement when increasing contract area of Rod agreement to transform the energy attenuation and the attenuation at the energy being delivered to evaluate. To this end, the same material used in the field test, laboratory test to apply Rod diameter and length have been considered, designed to perform the experiment was to use the Rod. Energy that raised at head of Rod, was increased and decreased by contracting type. The energy difference occurs in the head with the tip that shows the energy rating may be required at the tip is showing. Abstract The energy evaluation for the Rod field test to be at the basic sources and will be able to calculate the trusted information are measured from the tip.

• Architectural research
• /
• v.15 no.3
• /
• pp.167-174
• /
• 2013

Due to increasing competition of construction companies, it is required to optimize the management of construction projects and "lean" concepts are rapidly spreaded in construction industry. Steel work accounts for a large proportion in construction work, and a variety of attempts to efficiently perform steel work has currently made. And since rebar (Engineer-to-Order) can be engineered through design once order is placed, it gives the great impact on construction, thus, entire management is required. The purpose of this study is to present the method to increase the efficiency of field processing method of steel work in terms of lean construction. Once we examine process of steel work and identify the flow, we would like to analyze which processes should be improved through value analysis approach and present the improvement plans. Also, this study examines cases of field processing and factory processing, and it identifies the waste factors in the procurement process. Finally, this study would like to present the result of analysis from the perspectives of value. The rebar delivery process is divided into several steps and the duration of every step is surveyed. Using duration data, VAT (Value added time) can be calculated for analyzing the efficiency of the process.

• Geomechanics and Engineering
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2019

Grout injection is mainly used for permeability reduction and/or improvement of the ground by injecting grout material into pores, cracks, and joints in the ground. The oscillatory grout injection method was developed to enhance the grout penetration. In order to verify the level of enhancement of the grout, field grout injection tests, both static and oscillatory tests, were performed at three job sites. The enhancement in the permeability reduction and ground improvement effect was verified by performing a core boring, borehole image processing analysis, phenolphthalein test, scanning electron microscopy analysis, variable heat test, Lugeon test, standard penetration test, and an elastic wave test. The oscillatory grout injection increased the joint filling rate by 80% more and decreased the permeability coefficient by 33-68%, more compared to the static grout injection method. The constrained modulus of the jointed rock mass was increased by 50% more with oscillatory grout injection compared to the static grout injection, indicating that the oscillatory injection was more effective in enhancing the stiffness of the rock mass.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.334-350
• /
• 2004

Until now, architects have used traditional methods in order to develop architectural forms and use a digital technology as presentation tools. The field of digital technology has been expanded to control easily architectural data, eventually leads to the creation for creative ideas, which were belong to mainly designer's talent. It has been educated by using digital tool in foreign universities but in our case a little university try to do. So we need an adequate curriculum and educational media because of digitalized data, originated architectural form and reduction of time and money. In this paper, as it is surveyed the present situation of architetural education by using digital tool in domestic and foreign country, it can be used as the fundamental data that architectural education by using digital tool is initiated In our universities.

• Journal of the Korean housing association
• /
• v.17 no.5
• /
• pp.127-136
• /
• 2006

The intent of this study is to propose future planning guidelines and directions of the mixed-use buildings in the residential land development district in country-side cities, based on the concept that the neighborhood facilities are to be strategically laid out in a convenient location and planned in a proper manner for a healthy, safe, friendly and new neighborhood environment. For this purpose, seventeen mixed-use buildings which had been built in Shin-Eum housing development district in Gimcheon from 1995 until 2004 were chosen and investigated in terms of architectural characteristics in that process with surveying and analyzing those. The scope of investigation on case studies was that site size would be below 400 square meters, total area below 1500 square meters, and the number of stories below five stories high on the ground. Method of investigation on those was through field investigation, field photographs, recordings and drawings on those. Investigative contents have been divided and analyzed into the quantitative and qualitative factors in urban and architectural dimension. From results of quantitative investigations, five planning guidelines or directions could be obtained. From results of qualitative investigations, five planning guidelines or directions could be obtained. The criteria will be applied to new architectural developments of the neighborhood facilities linked with the small shops.

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.4
• /
• pp.177-187
• /
• 2008

This study does try to proceed on the assumption that complex buildings can vitalize urban life of modern society from contemporary complexity and cases of past failure, and intend to propose future planning guidelines and directions of the neighborhood mixed-use buildings in the housing development district of small cities. For this purpose, thirty buildings which had been built on Bugok housing district in Gimcheon from 1999 until 2007 were chosen and investigated in urban and architectural dimension. The scope of this investigation is that site size is below 400 square meter and the number of stories on the ground below 5 floor, and the method of that is through field investigation, field photographs, and recordings and drawings on those. Investigative contents could be divided and analysized into physical and functional elements in urban and architectural dimension. On the basis of these results, the future planning approach of complex buildings in medium and small cities will be considered as planning principles.

• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.51-58
• /
• 2012

The purpose of this study is to present the cognition of speculative aesthetics in the architectural space. Architectural space as the subject of the aesthetical study has been ignored such a long period though it should be centered of the whole architectural theory. Even it has not been dealt with independently but just only as a part of aesthetic or artistic field. Also it is also true that academic approach to the architectural space as per the aesthetic recognition has not been done so satisfactorily. The transcendental subjectivity as the aesthetic cognitive viewpoint of the architectural space means speculative aesthetics and the understands the essential meaning of the function and composition The conclusions of this study are as follows : The formalistic cognitive concepts including organic functional space between the whole and the part and anti-cubic synchronous space are included in the architecture of the speculative cognition, and finally the contextual cognitive concepts including the restoring analogical space of the in-depth constituent factors and associated centripetal spaces.

• Korean Institute of Interior Design Journal
• /
• v.13 no.3
• /
• pp.61-68
• /
• 2004

Contemporary Architecture stands on the basis of the influence of the formative arts, and it carves out a new field of architecture through various technical or material expressions. Herzog ＆ de Meuron, whose has been recognized internationally, are one of few artists following this Contemporary architectural flow. This thesis analyzed his work of art by the trend of times, and base on the results, tried to find his architectural language. Three points have been concluded through this architectural thesis. The architectural language does not deal with our monotonous environment, but deals with it technically. It's expressed all the architectural factors that we already know and used through new ways, so that, finally, it makes people feel the work of art in different point of views. I desire more future researches will focus on the many types of architectural and interior design languages that the Contemporary society craves.