• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.175-179
• /
• 2001

Regional odontodysplasia is a relatively rare condition in which both enamel and dentin are hypoplastic and hypocalcified. The result is localized arrest in tooth development. The etiology of regional odontodysplasia is uncertain, but, disturbance in vascular supply, somatic mutation, latent virus infection, trauma, hyperpyrexia, irradiation, nutrition, metabolic disorders and hereditary transmission are supported to be etiologic factors. Females are more often affected than males. (1.4 : 1). The maxillary arch is more often affected than the mandibular arch with the maxillary left quadrant being the most commonly involved. Affected teeth are hypoplastic, typically discolored yellow or yellowish brown, smaller in size and display a variety of surface marking including pitting and grooving. Radiographically, the teeth affected have been described to have a "ghost like" appearance or "fuzzy" appearance. Pulp calcification and denticles may be present within the pulp chambers of the affected teeth. In it's case, a 2 years old male visited for a treatment of uneruption of lower right teeth. Partial eruption of lower right deciduous central incisor and unerupted deciduous lateral incisor, deciduous canine and deciduous first molar showed severly delayed eruption state. On radiographic appearance, "Ghost like appearance", shortened root and opened apexes on lower right region were observed. It was suspected regional odontodysplasia with clinical and radiographic condition.

• The Journal of Engineering Geology
• /
• v.30 no.1
• /
• pp.43-57
• /
• 2020

The objective of this study was to evaluate the performance of high-strength lattice girders as a possible superior alternative to conventional steel arch ribs. For this purpose, the structural characteristics of supports were analyzed using numerical analysis, and their performance was evaluated using maximum bending load tests and tensile tests of the welded joint. According to the results of structural analysis, the optimum size of the upper and lower members and plates is 50 mm × 31.8 mm × 25.4 mm, demonstrating excellent functionality and economic efficiency. High-strength lattice girders of dimensions 55 mm × 30 mm × 20 mm and 85 mm × 30 mm × 20 mm, determined from bending load tests, are found to meet both the reference values and the target values of H-profiles 100 and 125. A review of the ratio of theoretical deflection to actual deflection shows that the high-strength lattice girder developed during this study meets fewer than five of the evaluation criteria for lattice girder deflections proposed by the Federal Railway Department of Germany. Finally, tensile test results reveal that the welded joint of the high-strength lattice girder at the main steel bar-auxiliary steel bar-plate junction exceeds the target value, indicating that the welded joint has sufficient stability.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.185-192
• /
• 2008

Purpose: This study was designed to investigate the fitness of adjustable dental impression trays on the Caucasian and African American. Material and methods: The size and shape of these trays were designed from the results of the dental arch size of Korean adults. Tray samples were made by CAD-CAM working. Sixty Caucasian (male:30, female:30) and sixty African American (male:30, female:30) were selected for taking irreversible hydrocolloid impression using these trays. The author measured the width and length of impression material on the several measuring points. Results: 1. Uniform impression material width was achieved by controling the width of the tray using stops and beveled guides. 2. In the maxillary tray on the Caucasian, the impression material thickness was measured to be rather great showing thickness of the midpalatal part 13.0 mm. 3. In the maxillary tray on the African American, the impression material thickness was measured to be rather great showing thickness of the midpalatal part 12.0 mm, posterior palatal part 11.0 mm and the labial frenum width was 11.0 mm. 4. In the maxillary tray on the African American, the impression material width of posterior border (0.8 mm) was measured to be small. 5. In the mandibular tray on the Caucasian, the impression material width was measured (2.7-6.7 mm) and posterior border width (2.1 mm) was measured small. The impression material length was measured (2.8-6.7 mm). 6. In the mandibular tray on the African American, the impression material width was measured to be rather great showing width of the labial frenum 9.2 mm and the width of posterior border was measured too small (0.3 mm). Conclusion: This adjustable dental tray shows good accuracy to Korean because it was designed by the analysis of the dental arch size of Korean adult model. With this result, it can be applied to Caucasian and African American, we can take more easy and accurate dental impressions.

• Journal of Chest Surgery
• /
• v.37 no.9
• /
• pp.796-799
• /
• 2004

A 52 day-old male infant who had Taussig-Bing anomaly with coarctation of the aorta underwent initial palliative Damus-Kaye-Stansel (DKS) procedure including arch reconstruction because of suspected intramural coronary artery, size discrepancy of great arteries, potential subaortic stenosis, refractory pneumonia, and severe congestive heart failure. Total repair was done 44 months later, which was composed of VSD patch closure, DKS take-down, and arterial switch procedure, We report a successful case of DKS take-down and arterial switch operation for the reuse of native aortic and pulmonary valves rather than Rastelli-type procedure in a patient with Taussig-Bing anomaly having palliative DKS procedure.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.245-255
• /
• 2001

Existing cut-and-cover tunnels are designed regardless of cut-slope under the assumption that the overburden weight of backfill soil acts on tunnel arch and the earth pressure at rest acts on tunnel walls. However, actual earth pressures acting on the tunnel lining depend on open-cut size composed of cut-slope and cut-width, and thus the tunnel lining shows a different structural behavior. This study investigated the effect of cut-slope on structural behavior of the cut-and-cover tunnel lining as follows; Firstly, a comprehensive numerical analysis method using FLAC2D code was used and verified by field measurements of tunnel profile. Secondly, based on the verified numerical analysis technique, earth pressure acting on the lining, and displacement and sectional force developed on the lining were estimated with various shapes of cut-slopes$30^{\circ}\;, 456{\circ},\; 60^{\circ},\; and\;75^{\circ}%). Numerical analysis results indicate that the steeper cut-slope shows the more displacement and moment of the tunnel lining.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.3
• /
• pp.223-230
• /
• 2014

Purpose: The purpose of this study was to evaluate the improvement and posttreatment stability of patients treated with extraction of lower incisors. Materials and Methods: The total of 20 patients with extracted lower incisors were analyzed by means of diagnostic models and panoramic x-rays at the time of initial, final and after 2 years of retention period of the treatment. Irregularity index, overjet, overbite, tooth size-arch length discrepancy (TSALD), intercanine width, intermolar width and American Board of Orthodontics cast/radiographic evaluation (ABO-CRE) were analyzed. Statistical analysis was performed using Wilcoxon signed-rank test. Results: After treatment, irregularity index showed significant decrease (P = 0.000). TSALD showed significant increase (P = 0.028). During retention period, irregularity index showed significant increase (P = 0.001). For ABO-CRE, total score showed significant decrease after treatment (P = 0.000) and showed average decreased which was not significant result (P = 0.053). Conclusion: Through evaluation of stability of extraction of lower incisors by means of diagnostic models and panoramic x-rays, it can be concluded that lower incisor extraction treatment had been stable for 2 years after treatment.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.173-181
• /
• 1999

To deepen the understanding of shear behaviour in beams without transverse reinforcement, the relative importance of five contributing factors to concrete shear resistance($v_c$), which are i)flexural compression zone, ii)friction at crack faces, iii)dowel action, iv)arch action and recently identified, v)residual tensile stresses across cracks, was explained physically using two analytical methods based on the truss concept. One is called "Modified Compression Field Theory(MCFT)" considering ii) and v) explicitly, and the other "Crack Friction Truss Model(CFTM)" more dominantly ii) in determining concrete resistance. To verify their effectiveness, the predictions using MCFT and CFTM were also made for twenty KAIST beam tests($f'_c$=53.7Mpa), designated more likely to the development of the size effect law based on the fracture mechanics concept. Experimental findings with varying of a/d, longitudinal reinforcement ratios, and obtained from MCFT enabled additional explanations for some phenomena which were difficult to measure in tests. However, MCFT seemed somewhat conservative for beams with higher longitudinal reinforcement, while somewhat unsafe for beams with larger depths. More tests are necessary leading to firm conclusions in these areas.

• The Journal of the Korean dental association
• /
• v.52 no.10
• /
• pp.623-632
• /
• 2014

The facial asymmetries include maxillary, mandibular, and chin asymmetries, although the most common deformity is primarily in the mandible. Common causes of this type of asymmetry can include asymmetric growth of the condyle or the mandible. In these patients, the location of the Me would be deviated to the shorter side because of the asymmetric growth of the mandible, and, commonly, the maxillary occlusal plane would be tilted toward the deviated side because the maxilla likely grows asymmetrically according to the pattern of asymmetric mandibular growth. Three-dimensional CT images are ideal for evaluating the size and location of anatomic structures, and such reconstructed images allow the use of software that can show anatomic structures from numerous angles, allowing actual measurements of distances and angles without problems of magnification, distortion, or superimposition caused by 2-dimensional imaging. In the present study using 3D-CT imaging, the 8 parameters, including measurements of the upper midline deviation, maxillary canting in the canine and first molar regions, width of the upper arch, width of the mandible at the Go, vertical length of the ramus, inclination of the ramus, and deviation of the Me were easily measured. The dentition should be orthodontically decompensated and dental midline should ensure incisor midlines positioned in the midline of each jaw before surgical correction. Surgical correction could be considered such as canting or yawing correction in the frontal or horizontal aspect, respectively.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.2
• /
• pp.122-126
• /
• 2003

This study was conducted to investigate plant growth characteristics and anatomical studies of Korean mistel (Viscum album var. coloratum (Kom.) Ohwi). Parasite position was upper part that has a plenty of sunshine area 5 to 10m apart from the ground, regardless host tree. Stem developed two branch stems from the each basal stem, leaf was grown from the end stems as opposite. Fruit has a light yellow color and berry size was 7 to 8 mm long diameter and it contains seed. Floral bud differentiation initiated with forming rounded dome and arch-shaped floral apex at the beginning stage, and produced heart-shaped sepal following the differentiation of leaf primordia. Floral bud formation processed centeral part first and following bilateral sides were developed in order. Leaf was thick and stoma and guard cell were observed from the two or three inner layers from the epidermis. Mistletoe penetrated cork cambium of host plant and was growing by rooting on xylem. Korean mistel connected to host plant through parasitic organ, haustorium structurally and physiologically.

• Journal of Chest Surgery
• /
• v.21 no.4
• /
• pp.649-655
• /
• 1988

One hundred and one patients with tetralogy of Fallot who were older than 16 years of age underwent a total correction of the anomaly between May, 1964 and July, 1987. This group comprised 14.9% of the 679 consecutive patients who had repair of the tetralogy at our institution during the same period. Of the 101 patients, 8 had a previous shunt procedure for palliation. The preoperative mean hemoglobin value was 16.9*1.0% and the mean systemic oxygen saturation, 84.4*0.9%. In 76 patients[75.2%], a type II ventricular septal defect was seen whereas in 14 patients[13.9%], the defect was type I. In 72 patients[71.3%], other cardiac anomalies were present which included patent foramen ovale in 37.6%, atrial septal defect in 8.99b, vegetations in 6.9%, right sided aortic arch in 5.9% and coronary artery anomaly in 5.0%. The right ventricular outflow obstruction was caused most commonly by combination of infundibular and valvular stenosis[74.3%], followed by isolated infundibular stenosis[19.8%] and valvular stenosis [5.9%] alone in order. The preoperative mean diameter of the pulmonary valve ring size was 10.2*0.5 mm in diameter. A transannular patch enlargement of the right ventricular outflow tract was performed in 28 patients and, in 12 a pericardial monocusp was utilized. Major anomalous aorto-pulmonary vessels were encountered in 5 patients which were detected before or during the operation. In 3 patients, they were ligated beforehand to control the flooding of the operative field. Postoperatively, the mean systolic pressure gradient between the right ventricle and the main pulmonary artery was 16.2*2.3 mmHg and the mean systolic pressure- ratio between the right and the left ventricle was 45.3*2.0%. Perioperative complications including bleeding in 8.9%, pleural effusion in 7.9%, dysrrhythmia in 4.9%, and residual VSD in 4.0%. Operative mortality was 8.9%. There has been no operative death in the recent 65 cases since 1981. There were 2 late deaths, 68 and 113 months after surgery. There were 2 late detachment of the VSD patch during the follow-up period. Of the 6 patients with patch detachment found during the postoperative period, 3 had subacute bacterial endocarditis before or after the operation indicating The serious nature of this complication. Two of these patients subsequently underwent a successful reoperation.