• The korean journal of orthodontics
• /
• v.20 no.2
• /
• pp.217-226
• /
• 1990

The purposes of this study were to clarify the effect of tooth size and arch size upon the crowding. 175 upper casts were measured and following conclusions were made. 1. Tooth size, intermolar width, 2nd premolar width of crowded group were not significantly different from those of noncrowded groups. 2. Intercanine width, arch length of noncrowded group were significantly larger than crowded group. 3. Multiple regression equations were derived by using tooth size, arch perimeter, arch length, intermolar width.

• The korean journal of orthodontics
• /
• v.14 no.2
• /
• pp.263-272
• /
• 1984

This study was undertaken to examine the extent to which tooth size and jaw size each contribute to dental crowding. Two groups of dental casts were selected on the basis of dental crowding. One group, consisting of 94 pairs of dental casts (46 males and 48 females) with normal occlusion. A second group, consisting of 84 pairs of dental casts (98 males and 46 females) with crowding. The results were as follows. 1. Means and standard deviations of the two groups were used to compare the two groups. 2. Significant differences were observed between two groups on the basis of tooth size, arch dimension and arch perimeter. 3. Between noncrowded group and crowded group, was crowded group was found to have large troth size than noncrowded group, while smaller arch dimension and perimeter. 4. Significant differences were observed between males and females on the basis of tooth size, arch dimension and arch perimeter. 5. Author found ideal arch shape of normal occlusion.

• The Journal of the Korean dental association
• /
• v.10 no.3
• /
• pp.155-158
• /
• 1972

As a factor of dentistry, the form of the tooth especially the size plays an important part. And in orthodontics the relation between the tooth size, arch length and the basal arch is regarded important, and it is closely related to the extraction and retension probolem in treatment planning. The auther's study of the mesio-distal crown diameters of permanent teeth, width and length of the dental arch and basal arch from the cast of 50 men and 53 women who could be measured clerly, among 102 men and 107 women regarded as the normal occlusion showed the followings. 1. Table 1 and table 2 showed the measurement of the mesio-distal maximum width of the permanent teeth, width and length of the dental arch and basal arch of the upper and lower dentitions. 2. Men's mesio-distal width of the teeth, arch length and arch width of the upper and the lower dentition, basal arch width and basal arch length are larger than those of wonen's 3. We compared the Koreans with the American white. Upper central incisors, upper first molars and lower second premolars of the latter were larger than those of the former. And the Koreans's rest tooth of the rest were comparatively larger.

• Journal of Korean society of Dental Hygiene
• /
• v.20 no.1
• /
• pp.11-18
• /
• 2020

Objectives: We analyzed the correlation between physique and size of the dental arch of college students with normal occlusion. Methods: Ninety-nine college students filled out the prepared questionnaire. The length and width of the dental arch of the students was measured using a plaster model after taking an impression. The data were analyzed using the t-test and correlational analysis. Results: The maxilla arch length was 3.70 mm longer and the inter-molar width of the maxilla was 3.06 mm longer in men (both p<0.01) than in women. Additionally, the mandible was 3.66 mm longer in men as compared to those in the women (p<0.01). As height increased, there was increase in the body weight (α=0.683, p<0.01), maxilla arch length (α=0.373, p<0.01), molar width of the maxilla (α=0.214, p<0.05), and the mandible (α=0.280, p<0.01). The greater the weight increase, the greater the maxillary arch length increase (α=0.392, p<0.01), and the greater the molar width of the maxilla (α=0.336, p<0.01) and mandible (α=0.502, p<0.01) increase. Conclusions: As physical size (both height and weight) increased, the maxillary length and molar width also increased. Based on the results of this study, the cause of malocclusion, form and size of the dental arch, and stable occlusion can be used as basic data.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.217-225
• /
• 1988

This study was undertaken to examine relationship between tooth size and arch dimension in dental crowding. Two groups of dental casts were selected on the basis of dental crowding. One group, consisting of 51 pairs of dental casts (24 male and 27 female), exhibited remarkable dental crowding. A second group, consisting of 60 pairs of dental casts (30 male and 30 female), exhibited little or no crowding. Mean and standard deviation of the following parameters were used to compare two groups. individual and collective mesiodistal tooth diameters, buccal and lingual arch widths and arch area. The following results were obtained. 1. The crowed group revealed larger tooth size than noncrowded group. (p < 0.01) 2. The crowded group smaller maxillary dental arch dimension than noncrowded group except lingual arch width at canine region. (p < 0.01) 3. The corwded group revealed smaller mandibular dental arch dimension than noncrowded group except lingal arch width at second premalar region in the male and buccal arch width at canine, premolar region in the female. (p < 0.01) 4. The crowded group revealed smaller arch area than noncrowded group in the female (p < 0.01), but there was no significance in the male.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.166-182
• /
• 1998

The purposes of this study are to evaluate the Korean mandibular dental arch and classify the mandibular dental arch shape and size based on the incisal angle, canine angle, inter second molar width and height. In this study the mandibular study models were fabricated using irreversible hydrocolloid impression material from 225 volunteers with a mean age 23.62 (range 19-29). And the study models were measured with 3-dimensional measuring device and the mandibular dental arch was classified by means of K-means clustering method and visual inspection, then obtained data were analyzed with t-test for the statistical analysis. The results were as follows ; 1. The average canine height was 5.19mm(s.d. 1.17) in both sex, 5.34mm in male, and 4.95mnm in female. And the sexual difference was significant($0). 2. The average second molar height was 39.81mm(s.d. 2.44) in both sex, 40.19mm in male, and 39.21mm in female. And the sexual difference was significant($0). 3. The average inter-canine width was 27.16mm(s.d. 1.78) in both sex, 27.41mm in male, and 26.77mm in female. And the sexual difference was significant($0). 4. The average inter-first molar width was 46.93mm(s.d. 2.67) in both sex, 47.72mm in male, and 45.7mm in female. And the sexual difference was significant($0). 5. The inter-second molar width was average 56.09mm(s.d. 3.01) in both sex, 57.24mm in male, and 54.32mn in woma. And the sexual difference was significant($0). 6. The arch form was classified into three shapes based on the incisal and canine angle. V-shape showed $124.88^{\circ}$ of incisal angle and $141.64^{\circ}$ of canine angle, U-shape showed $152.76^{\circ}\;and\;125.35^{\circ}$, and O-shape showed $138.03^{\circ}\;and \;33.66^{\circ}$ respectively. Each shape distribution was that the V-shape was 14.2%, the U-Shape was 14.7%, and the O-shape was 71.1% of the 225 study models. 7. It was thought that the use of second molar width is more reasonable than height for classifying the dental arch size. The arch size was classified into four sizes based on the second molar width. Size 1 showed range of 42.24-48.23mm, size 2 showed 48.24-54.23mm, size 3 showed 54.24-60.23mm, and size 4 showed 60.24-66.23mm respectively. Each arch size distribution was that the size 1 was 1.3%, the size 2 was 27.1%, the size 3 was 63.6%, and the size 4 was 8.0% of the 225 study models.

• The korean journal of orthodontics
• /
• v.21 no.2 s.34
• /
• pp.273-285
• /
• 1991

Crowded group is composed of 60 subjects who visited Yonsei University for orthodontic treatment and has no history of orthodontic treatment. Noncrowded group is composed of 26 subjects who has no crowding, considered to have a normal occlusion and no history of orthodontic treatment. Currently available and approved analytic method was used. Interrelationship between tooth size and arch size, and it's correlation on tooth crowding was studied and the following results were obtained. 1. In comparison of sum of mesiodistal width, of crown size of teeth was greater in noncrowded group than that of crowded group on both arch. (p < 0.01). 2. In comparison of arch lengths, the values measured from arch length 2 showed greater in noncrowded group (p < 0.01). Also in crowded group, arch length 1 showed greater value than arch length 2 on both arch (p < 0.01). 3. In comparison of arch widths, upper interlateral (p < 0.01) and upper intercanine width (p < 0.05) showed greater value in noncrowded group on upper arch and intermolar width showed greater value in noncrowded group on both upper and lower arches (p < 0.05). 4. In comparison of arch perimeters, arch perimeter 2 was greater value in noncrowded group on both upper and lower arches (p < 0.01). 5. Dentoalveolar disproportion was greater in noncrowded group on both upper and lower arches (p < 0.01). 6. In lower incisors MD/FL ratio, the central and lateral incisors were greater in crowded group, but statistial significance was only in lateral incisors (p < 0.01) 7. The irregularity index of lower incisors showed greater value in crowded group (p < 0.01).

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.155-163
• /
• 1988

The purpose of this study was to evaluate and compare frictional forces generated between orthodontic brackets and arch wires. Independent variables were chosen for study: arch wire size and shape, arch wire material, bracket width, and second-order angulation between bracket and arch wire. Kinetic frictional forces of stainless steel (0.014', 0.016', 0.018', 0.016' ${\times}$ 0.022', 0.018' ${\times}$ 0.022'), $\beta-titanium$ (0.016' ${\times}}$ 0.022') arch wires were measured on wide and junior edgewise twin brackets (0.018' ${\times}$ 0.022' slot). Instron was used to pull arch wires while $0^{\circ},\;3^{\circ},\;6^{\circ},\;or\;9^{\circ}$ angulation between and wire and bracket was given. The results were as follows: 1. The frictional force of $\beta-titanium$ wire was larger than that of stainless steel wire. 2. The frictional force was generally increased as the size of wire is increased. 3. The frictional force of rectangular wire was larger than that of round wire. 4. As second order angulation was increased, the frictional force was also increased. 5. The frictional force was larger on a wide bracket than on a junior bracket.

• The korean journal of orthodontics
• /
• v.15 no.1
• /
• pp.85-92
• /
• 1985

This investigation was designed to compare the craniofacial morphology of Class III malocclusions with that of normal occlusions using PM line. The subjects consisted of forty-four normal occlusions (twenty-three males and twenty-one females) and sixty-nine Class III malocclusions (thirty males and thirty-nine females), aged eight through ten. Using the tracings of the standard lateral cephalograms, various angles, linear measurements and linear ratios of counter-part were recorded and analyzed by t-test. The following characteristics of craniofacial morphology of Class III malocclusion were obtained by this study. 1. Maxillary anteroposterior position was balanced with Nasion but was not balanced with mandible because maxillary bony arch was small and positioned posteriorly and mandibular corpus was large and positioned relatively anteriorly. 2. Upper and lover alveolar bony arch were not balanced each other in its size. 3. In counterpart analysis, Class III malocclusion was more horizontally unbalanced than normal occlusion. 4. Class III malocclusion was divided into 11 groups by maxillary and mandibular bony arch position, size and alveolar bony arch size. Unbalanced bony size of the maxilla and mandible was a major characteristics of Class III malocclusion.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.2
• /
• pp.171-182
• /
• 2004

This study is focused on finding out the mechanical behavior of pillars and the ground adjacent to the tunnel depending on the central tunnel size and the invert during the construction of 2 arch tunnels in the sandy ground. Model tests were performed in the trap door system, which was composed of 3 separately movable plates. Central pillar was installed on the central movable plate to measure the pillar loads during the excavation of pilot tunnel and the main tunnel. The load-transfer and the loosening load were measured at the bottom plates adjacent to the 2 arch tunnels. The ground settlement and displacement of the tunnel lining were also measured. As results, not only pillar load but also the load transfer mechanism was influenced by the construction sequences, central tunnel size, and the invert.