• 대한치과교정학회지
• /
• 제14권2호
• /
• pp.263-272
• /
• 1984

This study was undertaken to examine the extent to which tooth size and jaw size each contribute to dental crowding. Two groups of dental casts were selected on the basis of dental crowding. One group, consisting of 94 pairs of dental casts (46 males and 48 females) with normal occlusion. A second group, consisting of 84 pairs of dental casts (98 males and 46 females) with crowding. The results were as follows. 1. Means and standard deviations of the two groups were used to compare the two groups. 2. Significant differences were observed between two groups on the basis of tooth size, arch dimension and arch perimeter. 3. Between noncrowded group and crowded group, was crowded group was found to have large troth size than noncrowded group, while smaller arch dimension and perimeter. 4. Significant differences were observed between males and females on the basis of tooth size, arch dimension and arch perimeter. 5. Author found ideal arch shape of normal occlusion.

• 대한치과교정학회지
• /
• 제18권1호
• /
• pp.217-225
• /
• 1988

This study was undertaken to examine relationship between tooth size and arch dimension in dental crowding. Two groups of dental casts were selected on the basis of dental crowding. One group, consisting of 51 pairs of dental casts (24 male and 27 female), exhibited remarkable dental crowding. A second group, consisting of 60 pairs of dental casts (30 male and 30 female), exhibited little or no crowding. Mean and standard deviation of the following parameters were used to compare two groups. individual and collective mesiodistal tooth diameters, buccal and lingual arch widths and arch area. The following results were obtained. 1. The crowed group revealed larger tooth size than noncrowded group. (p < 0.01) 2. The crowded group smaller maxillary dental arch dimension than noncrowded group except lingual arch width at canine region. (p < 0.01) 3. The corwded group revealed smaller mandibular dental arch dimension than noncrowded group except lingal arch width at second premalar region in the male and buccal arch width at canine, premolar region in the female. (p < 0.01) 4. The crowded group revealed smaller arch area than noncrowded group in the female (p < 0.01), but there was no significance in the male.

• Steel and Composite Structures
• /
• 제6권2호
• /
• pp.87-101
• /
• 2006

The deformation and dynamic behavior mechanism of submerged shell-like lattice structures with membranes are in principle of a non-conservative nature as circulatory system under hydrostatic pressure and disturbance forces of various types, existing in a marine environment. This paper deals with a characteristic analysis on quasi-periodic and chaotic behavior of a circular arch under follower forces with small disturbances. The stability region chart of the disturbed equilibrium in an excitation field was calculated numerically. Then, the periodic and chaotic behaviors of a circular arch were investigated by executing the time histories of motion, power spectrum, phase plane portraits and the Poincare section. According to the results of these studies, the state of a dynamic aspect scenario of a circular arch could be shifted from one of quasi-oscillatory motion to one of chaotic motion. Moreover, the correlation dimension of fractal dynamics was calculated corresponding to stochastic behaviors of a circular arch. This research indicates the possibility of making use of the correlation dimension as a stability index.

• 대한치과보철학회지
• /
• 제30권1호
• /
• pp.43-54
• /
• 1992

The purpose of this study was to obtain the guides of establishing vertical dimension by analyzing the facial and oral landmarks of Korean adults. The following conclusions were obtained from this study. 1. The ratio of bizygomatic width to dental arch width was 3.26 : 1 in male and 3.21 : 1 in female, and the ratio of vertical dimension to dental arch length was 2.49 : 1 in male and 2.39 : 1 in female. 2. It was obtained by analysis of multiple regression that the corelative formula, vertical dimension$=23.37+0.24{\times}bizygomatic$ $width+0.29{\times}dental$ arch length. 3. There was no statistically significant difference between the results of vertical dimension acquired by means of Hayakawa's prediction($68.04{\pm}3.16mm$ in male, $64.38{\pm}3.00mm$ in female) and that of vertical dimension by this study.

• 대한치과교정학회지
• /
• 제24권4호
• /
• pp.885-895
• /
• 1994

This study was performed to compare the dental arch dimensions of urban and rural high school females according to the region of residence and facial type. A model and cephalometric analysis was made from 48 urban and 48 rural high school females. The results of this study were obtained as follows : 1. Arch width in the urban group were similar to the rural group. 2. Lingual arch length at upper 1st premolar level in the urban group was larger than the rural group and lingual arch length at lower canine level in rural group was larger than the urban group. 3. Palatal height at canine level in the rural group was higher than the urban group. 4. Palatal heights at 2nd premolar and 1st molar level had correlation with the VERT index. In comparison of lingual arch dimensions according to Rickett's facial group, palatal heights at 2nd premolar and 1st molar level in dolichofacial group were lower than other groups.

• 구강회복응용과학지
• /
• 제30권4호
• /
• pp.315-323
• /
• 2014

과도한 치아의 마모는 수직 교합 고경의 감소를 야기하여 구강 및 저작계의 병적 변화를 일으킬수 있으며, 이 경우 새로운 교합 설정과 수직 고경 회복 시 정확한 진단과 분석이 필수적이다. 이에 본 증례에서는 고딕 아치 트레이서를 통해 거상된 수직고경에서의 중심위를 기록한 후 전악 수복을 시행하였다. 본 증례는 70세 남자 환자로서 이가 시리고 아파서 음식을 먹지 못한다는 주소로 내원하였다. 전반적인 치아 마모에 의한 수직고경의 감소를 보여 면밀한 모형분석을 통해 수직고경의 거상을 결정하였다. 거상된 수직고경에 맞춰 고딕 아치 트레이서를 이용하여 중심위 채득 후 임시 보철물을 장착하였다. 4개월 동안 임시 보철물을 통해 적절한 교합을 형성하였으며 이를 이용하여 최종 보철을 제작하였다. 치료를 통해 기능적, 심미적으로 만족할 만한 결과를 얻었기에 이를 보고하는 바이다.

• 대한치과교정학회지
• /
• 제27권3호
• /
• pp.457-471
• /
• 1997

본 연구는 치열궁 길이 부조화(Arch length discrepancy : 이하 ALD)의 원인요소간의 상대적 중요성과 혼합치열기에서의 예측가능성을 알아보고자 시행되었다. Angle씨 I급 대구치관계이며 근기능 이상이나 골격형태의 이상이 없다고 판단되는 142명의 진단모형을 이용하여 성별과 ALD의 양에 따라 여섯군으로 나누어 각 치아의 크기와 치열궁 각 부위의 크기를 계측하였다. SPSS통계처리 프로그램을 이용하여 각군의 평균, 표준편차를 구하고 Student t-test, 상관관계 분석, 요인분석, 다중회귀분석을 실시하였으며 혼합치열기에서 얻을 수 있는 자료들을 이용한 ALD의 예측가능성을 평가하여 다음과 같은 결과를 얻었다. 1. 성별에 따른 차이는 정상군에서는 거의 보이지 않았으며 spacing군은 대부분의 계측치에서, crowding군은 몇가지 치열궁의 크기에 관한 계측치에서 유의한 차이를 보였다. 2. 남자crowding군과 여자 spacing군은 해당 정상군에 비해 주로 치아크기에 관한 계측치에서 유의한 차이를 보였다. 3. 남자 spacing군과 여자crowding군은 해당 정상군에 비해 치열궁의 크기에 관한 계측치에서 유의한 차이를 보였다. 4. 상관관계분석과 요인분석결과에서는 주로 치열궁의 크기에 관한 계측치들이 ALD와 큰 연관성을 나타내었다. 5. 혼합치열기에서 얻을 수 있는 정보인 중절치, 측절치, 제1대구치의 폭경과 제1대구치간 폭경, 치열궁 장경 을 이용한 ALD의 다중회귀분석은 최소 $63\%$에서 최대 $80\%$의 예측도(R square)를 보였다.

• 대한치과기공학회지
• /
• 제43권3호
• /
• pp.84-92
• /
• 2021

Purpose: The purpose of this study was to compare the dimension safety evaluation between a general ultrasonic cleaner and an ultrasonic cleaner equipped with UV-C (ultraviolet-C). Methods: An edentulous model was prepared. A denture base and an occlusal rim were fabricated, and scanning was performed. After scanning, a denture base and full arch artificial teeth were designed. The full arch artificial teeth were printed using a three-dimensional printer (n=10). The residual resin was washed with alcohol and then scanned (reference data). The printed specimens were classified and cleaned using a general ultrasonic cleaner (GU group) and an ultrasonic cleaner equipped with UV-C (UC group). After each washing, a rescan was performed (scan data). Reference data and scan data were superimposed using overlapping software. Data were statistically analyzed using the Mann-Whitney test (α=0.05). Results: In the deviation values of full arch artificial teeth, the GU group showed a high deviation of 18.02 ㎛ and the UC group showed a low deviation of 15.02 ㎛. The two groups demonstrated a statistically significant difference (p<0.05). Conclusion: Full arch artificial teeth prepared using photopolymerized resin were deformed according to the temperature of water generated in the ultrasonic cleaner. It is judged that there is no deformation according to the UV-C ultrasonic cleaner.

• 구강회복응용과학지
• /
• 제30권3호
• /
• pp.238-245
• /
• 2014

무치악 환자에서 기능적으로 우수하고 심미적으로 만족스러운 의치 제작을 위해서는 상, 하악 교합관계, 즉 교합수직 고경과 중심위를 정확하게 결정해야 한다. 수직관계를 결정할 때에는 근육, 상, 하악 치열궁간 거리와 상, 하악 치조제의 평행도 등 여러 요소들이 고려되어야 한다. 또한, 중심위는 모든 하악 운동이 시작되는 재현 가능한 위치로서 기록하는 과정 역시 의치 제작에 매우 중요하다. 만일 이러한 악간관계 채득시 오차가 생기면 결과적으로 제작한 의치가 불편하게 된다. Gothic arch tracer와 같은 트레이싱을 이용하는 방법은 술자가 쉽게 교합수직고경과 중심위를 찾아내고 기록할 수 있는 좋은 방법으로 안정적인 교합수직고경에서 하악의 운동위를 얻기에 유리하다.

• Journal of Korean Dental Science
• /
• 제7권2호
• /
• pp.66-79
• /
• 2014

Purpose: To analyze the amount and pattern of tooth movement and the changes in arch dimension of mandibular dentition after orthodontic treatment using a new three-dimensional (3D)-indirect superimposition method. Materials and Methods: The samples consisted of fifteen adult patients with class I bialveolar protrusion and minimal anterior crowding, treated by extraction of four first premolars with conventional sliding mechanics. After superimposition of 3D-virtual maxillary models before and after treatment using best-fit method, 3D-virtual mandibular model at each stage was placed into a common coordinate of superimposition using 3D-bite information, which resulted in 3D-indirect superimposition for mandibular dentition. The changes in mandibular dental and arch dimensional variables were measured with Rapidform 2006 (INUS Technology). Paired t-test was used for statistical analysis. Result: The anterior teeth moved backward, displaced laterally, and inclined lingually. The posterior teeth showed statistically significant contraction toward midsagittal plane. The amounts of backward movement of anterior teeth and forward movement of posterior teeth showed a ratio of 6 : 1. Although the inter-canine width increased slightly (0.8 mm, P<0.05), the inter-second premolar, inter-first molar, and inter-second molar widths decreased significantly with similar amounts (2.2 mm, P<0.05; 2.3 mm, P<0.01; 2.3 mm, P<0.001). The molar depth decreased (6.7 mm, P<0.001) but canine depth did not change. Conclusion: A new 3D-indirect superimposition of the mandibular dentitions using best-fit method and 3D-bite information can present a guideline for virtual treatment planning in terms of tooth position and arch dimension.