• 대한화학회지
• /
• 제52권6호
• /
• pp.637-648
• /
• 2008

• Journal of Welding and Joining
• /
• 제18권6호
• /
• pp.68-73
• /
• 2000

In case of overalyered wrapping roll, beadmark shape appear at wrapping roll surface due to irregular wear between weld bead. Irregular wear of this is caused by difference of hardness between weld bead. This study aims at investigating which matrix is good for removing of beadmark at wrapping roll surface. So, we make specimen with martensitic matrix and austenitic matrix. The overlayered alloys were deposited 4 times on a SS41 steel plate using self-shielding flux cored arc welding method. Difference of hardness between weld bead of specimen with matrix of martensite was higher than specimen with matrix of austenite both as-welded and after heat treatment. Therefore, austenitic matrix is between than martensitic matrix for removing of beadmark of wrapping roll surface.

• 대한수학회지
• /
• 제58권4호
• /
• pp.967-976
• /
• 2021

We obtain the list of prime knots with arc index 12 up to 16 crossings and their minimal grid diagrams. This is a continuation of the works [5] and [8] in which Cromwell matrices were generated to obtain minimal grid diagrams of all prime knots up to arc index 11. We provide minimal grid diagrams of the prime alternating knots with arc index 12. They are the 10 crossing prime alternating knots. The full list of 19,513 prime knots of arc index 12 up to 16 crossings and their minimal grid diagrams can be found in the arXiv [6].

• 동력기계공학회지
• /
• 제21권2호
• /
• pp.70-76
• /
• 2017

When Timoshenko arcs considering the shear deformation and rotatory inertia have elastic supports, the authors analyze in-plane free vibration of them by the transfer influence coefficient method. This method finds the natural frequencies of them using the transfer of influence coefficient after obtaining the transfer matrix of arc element from numerical integration of the differential equations governing the vibration of arc. In this study, two computer programs were made by the transfer influence coefficient method and the transfer matrix method for analyzing free vibration of Timoshenko arcs. From numerical results of four computational models, we confirmed that the transfer influence coefficient method is a reliable method when analyzing the free vibration of Timoshenko arcs. In particular, the transfer influence coefficient method is a effective method when analyzing the free vibration of arcs with rigid supports.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.90-95
• /
• 2005

The wire-arc process is a low-cost thermal spray method simply utilizes electrical energy to melt the feedstock wire. It is more userful for field applications, especially to coat large surface area. In this paper, a special Fe-based alloy coatings by using the wire-arc process were developed. Nanoscale composite coatings were achieved either during spraying or through a post heat treatment. As-sprayed Fe-based alloy coatings had been an amorphous matrix structure, after heating to $700^{\circ}C$ for 10 minutes a solid state transformation occurred in the some fraction of amorphous matrix which resulted in the formation of nanostructured recrystallized phase. Scanning electron microscopy (SEM) and field emotional scanning electron microscope(FE-SEM) were applied to analyze the microstructure of the coatings. Additionally hardness and bend resistance of the Fe-based alloy coatings were examined, and these results were compared with those of partially stabilized zirconia(PSZ) coatings by using the plasma spray process.

• 한국주조공학회지
• /
• 제12권3호
• /
• pp.238-247
• /
• 1992

A carbon fiber(CF) reinforced Cu-10%Sn alloy matrix composite was successfully fabricated by squeeze casting method employing preheated graphite mold and proper process controlling factors. The matrix solidification microstructure of the Cu-10%Sn/CF composite reveals ${\alpha}-dendrite$ and ${\alpha}+{\delta}$ eutectoid. To compare the squeeze cast Cu-10%Sn/CF compostie with PM route fabricated Cu-graphite composites for electric contact material, mechanical wear and electrical arc wear tests were performed. Mechanical wear rate of the Cu-10%Sn/CF is much lower than that of the Cu-graphite composite. Weight loss with a variation of contact number in electrical arc wear tests shows a similar trend between the squeeze cast Cu-10%Sn/CF and PM Cu-graphite composites.

• International Journal of Korean Welding Society
• /
• 제1권1호
• /
• pp.58-62
• /
• 2001

The surface of AC8A Ah alloy was modified by adding the Cu powder using a Plasma Transferred Arc (PTA) welding process. Under the optimum fabricating conditions, the modified surface of AC8A Ah alloy was observed to possess the sound microstructure with a minimum porosity. Hardness and wear resistance properties of the as-fabricated alloy were compared with those of the 76 heat-treated one. In case of the as-fabricated alloy, the hardness of the modified layer was twice that of the matrix region. Although significant increase in the hardness of the matrix region was observed after T6 heat treatment, the hardness of the modified layer was not observed to change. The wear resistance of the modified layer was significantly increased compared to that of the matrix region. The microstructure of a weld zone and the matrix region were investigated using the optical microscope, scanning electron microscope (SEM), electron probe microanalysis (EPMA), and transmission electron microscope (TEM). The primary and eutectic silicon in the weld zone were finer and more curved than in the matrix region, while some precipitates has had been found therein. According to the TEM observation, the predominant precipitate present in the weld zone was the $\theta$'phase, which is precipitated during cooling by rapid solidification in PTA welding process. Improvement of hardness and wear properties in the weld zone in the as-fabricated condition can be explained based on the presence of $\theta$’precipitates and fine primary and eutectic silicon distribution.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.34-42
• /
• 1986

본 논문에서는 균열면이 원호(circular arc)를 이루고, Comninou 모델과 같이 균열면의 일부가 접촉되어 있는 경우 L적분이 적분경로에 무관함을 증명하고 이를 이용하여 재료가 서로 다른 원형 개재물과 기재와의 경계면에 존재하는 계면 균열에서의 응력확대계수를 구하는 방법에 대해 살펴보았다. 기지가 무한 고체이고 접촉역이 작아 접촉역의 존재가 균열선단에서 멀리 떨어진 곳에서의 응력장에 거의 영향을 끼치지 아`는 경우에는 접촉역을 가정하지 않은 문제에 대한 해, 즉 진동특성을 나타내는 해로 부터, L적분의 성질을 이용하여, 접촉역을 가정하였을 때의 응력확대 계수를 간단한 꼴로 표시할 수 있었고, 유한의 기지에 원형 개재물이 존재하는 문제에 대해서는 F.E.M을 사용하여 L적분을 계산함으로써 응력확대계수를 구할 수 있었다.

• 전산구조공학
• /
• 제9권3호
• /
• pp.107-114
• /
• 1996

비선형 알고리즘으로 "Arc legnth method"를 사용하여 변형률 요소 기법에 의해 구성된 전단 효과를 고려한 곡선보 요소를 이용하여 아치보(arch beam)의 스냅좌굴(snap buckling)현상을 해석함으로써 접선 강성행렬의 선택에 따른 알고리즘의 수렴 특성을 검토하였다. 또한 아치보의 스냅 좌굴현상에서 아치보의 길이와 높이의 비에 따른 스냅 좌굴 진전 특성을 검토하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.361-365
• /
• 2002

Advancements in silicon phase control (SCR) technologies provide an arc welding power supply that has the capability to allow the alteration of the Alternating Current (AC) welding output. These technologies provide a square wave output involving sixteen frequency selections and multiple balance selections. While an AC out put is known to minimize magnetic disturbances associate with Direct Current (DC), the potentials of a non-sinusoidal waveform have not been explored. The focus of the paper is to determine the effects that the frequency and balance of an AC wave form output will have upon a high speed Submerge Arc (SAW) application. The test matrix of the project includes welding .250" steel plate. Joint type is square groove with a travel speed of 65 IPM. Each of the weld parameters was held constant, only the frequency and/or balance were altered between welds. Each frequency/balance combination involved three-gap spacing. Upon completion of the welds the bead profiles were measured and recorded. A relationships/trends were observed with various frequency and balance values. Optimum frequency and balance values were found for the .250" square groove application which permit consistent weld sizing, ease of slag removal, and minimal plate distortion.