• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.616-624
• /
• 2011

The flow characteristics and heat transfer augment on the periodically arranged semi-circular ribs in a rectangular channel for turbulent flow has been investigated numerically. The aspect ratio of the rectangular channel was AR=5, the rib height to hydraulic diameter ratio were 0.07 and rib height to channel height ratio was set as e/H=0.117 for various PR(rib pitch-to-rib height rate) between 8~14, respectively. The SST k-${\omega}$ turbulence model and v2-f turbulence model were used to find out the heat transfer and the flow characteristics of near the wall which are suited to obtain realistic phenomena. The numerical analysis results show turbulent flow characteristics, heat transfer enhancement and friction factor as observed experimentally. The results predict that turbulent kinetic energy(k) is closely relative to the diffusion of recirculation flow. and v2-f turbulence model simulation results have a good agreement with experimental values.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.11
• /
• pp.1379-1389
• /
• 1999

A new technique for control of size and shape of flame-made particles is Introduced. The characteristic sintering time can be controlled Independently of collision time by heating the particles with irradiation of laser because the sintering time strongly depends on temperature. A coflow oxy-hydrogen diffusion flame burner was used for $SiCl_4$ conversion to silica particle. Nanometer sized aggregates irradiated by a high power CW $CO_2$ laser beam were rapidly heated up to high temperatures and then were sintered to approach volume-equivalent spheres. The sphere collides much slower than the aggregate, which results in reduction of sizes of particles maintaining spherical shape. Light scattering of Ar ion laser and TEM observation using a local sampling device were used to confirm the above effects. When the $CO_2$ laser was irradiated at low position from the burner surface, particle generation due to gas absorption of laser beam occurred and thus scattering intensity increased with $CO_2$ laser power. At high irradiation position, scattering intensity decreased with $CO_2$ laser power and TEM image showed a clear mark of evaporation and recondensation of particles for high $CO_2$ laser power. When the laser was irradiated between the above two positions where small aggregates exist, average size of spherical particles obviously decreased to 58% of those without $CO_2$ laser irradiation with the spherical shape. Even for increased carrier gas flow rate by a factor of three, TEM photograph also revealed considerable reduction of particle size.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.307-307
• /
• 2013

초고집적 회로에 적용되는 반도체 소자의critical dimension (CD)이 수 nano 사이즈로 줄어들고 있기 때문에, 다양한 물질의 식각을 할 때, 건식식각의 중요성이 더 강조되고 있다. 특히 $SiO_2$와 같은 유전체 물질을 식각할 때, plasma process induced damages (P2IDs)가 관찰되어 왔고, 이러한 P2IDs를 줄이기 위해, pulsed-time modulation plasma가 광범위하게 연구되어 왔다. Pulsed plasma는 정기적으로 radio frequency (RF) power on과 off를 반복하여 rf power가 off된 동안, 평균전자 온도를 낮춤으로써, 웨이퍼로 입사되는 전하 축적을 효과적으로 줄일 수 있다. 또한 fluorocarbon plasmas를 사용하여 $SiO_2$를 식각하기 위해 Dual-Frequency Capacitive coupled plasma (DF-CCP)도 널리 연구되어 왔는데, 이것은 기존의 방법과는 다르게 plasma 밀도와 ion bombardment energy를 독립적으로 조절 가능하다는 장점이 있어서 미세 패턴을 식각할 때 효과적이다. 본 연구에서는 Source power에는 60 MHz pulsed radio frequency (RF)를, bias power에는 2 MHz continuous wave (CW) rf power가 사용된 system에서 Ar/$C_4$ F8/$O_2$ 가스 조합으로, amorphous carbon layer (ACL)가 hard mask로 사용된 $SiO_2$를 식각했다. 그리고 source pulse의 duty ratio와 pulse frequency의 효과에 따른 $SiO_2$의 식각특성을 연구하였다. 그 결과, duty ratio의 감소에 따라 $SiO_2$, ACL의 etch rate이 감소했지만, $SiO_2$/ACL의 etch selectivity는 증가하였다. 반면에 pulse frequency의 변화에 따른 두 물질의 etch selectivity는 크게 변화가 없었다. 그 이유는 pulse 조건인 duty ratio의 감소가 전자 온도 및 전자 에너지를 낮춰 $C_2F8$가스의 분해를 감소시켰으며, 이로 인해 식각된 $SiO_2$의 surface와 sidewall에 fluorocarbon polymer의 형성이 증가하였기 때문이다. 또한 duty ratio의 감소에 따라 etch selectivity뿐만 아니라 etch profile까지 향상되는 것을 확인할 수 있었다.

• Reproductive and Developmental Biology
• /
• v.36 no.3
• /
• pp.163-166
• /
• 2012

This study was conducted to determine the relationship between elapsed time after semen preservation on the changes of bacteria and semen quality. Semen was diluted with BTS(Beltsville Thawing Solution) extender without antibiotic for 7 days and sperm parameter and fertility were measured. Sperm motility was measured by CASA and total bacteria number was counted after 22~24 hr incubation from counting agar plate in which sperm dilute to $10{\sim}10^6$ in 0.9% saline solution and inoculate to agar. Acrosomal integrity was measured by Chlortetracycline (CTC) staining. CTC patterns were uniform fluorescence over the whole head (pattern F), characteristic of incapacitated acrosome-intact spermatozoa; fluorescence-free band in the post-acrosomal region (pattern B), characteristic of capacitated acrosome-intact spermatozoa; and almost no fluorescence over the whole head except for a thin band in the equatorial segment (pattern AR), characteristic of acrosome reacted spermatozoa. Total number of bacteria was significantly increased (p<0.0001) 3 days after preservation. Sperm motility, viability, and morphological abnormality on elapsed time after preservation were lower from 5 ($77.24{\pm}6.47$, p<0.001) and 7 days ($77.24{\pm}6.47$, p<0.001) after preservation compared to 1 ($15.71{\pm}7.18$) and 3 days($18.39{\pm}7.22$) after preservation, respectively. Sperm viability was significantly lower ($53.25{\pm}35.03$, p<0.0001) at 7 days after preservation. Morphological abnormality of sperm was lower (p<0.001) at 1 ($15.71{\pm}7.18$) and 3 ($18.39{\pm}7.22$) days compared to 5 ($21.84{\pm}7.91$) and 7 ($22.59{\pm}9.93$) days after preservation. Acrosomal integrity and capacitation rate (pattern F) were significantly lower (p<0.001) from 5 days after preservation. Based on the data we obtained from this study suggested that semen preserved more than 5 days without antibiotic would not recommend use for artificial insemination.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.6
• /
• pp.986-993
• /
• 2001

Translation Initiation in prokaryotes involves the formation of a 30 S preinitiation complex, in which translation initiation factors play a role in the stimulation of fMet-tRNA (fMet) binding. However, the specific function and precise mechanism of initiation factor IF1 are still unclear. One a functionally active factor with a high purity. In the present study a large quantity of active IF was rapidly purified, obtained by the overexpression of the infA gene, and then used for a functional study. The induction of infA did not appreciably affect the growth rate of the protease-deficient strain E. coli AR68 harboring the IF1 overproducing plasmid. The level of IF1 obtained was approximately $1-2\%$ of the total cell protein, which enabled the yield of highly purified IF1 (>$98\%$ pure) to be increased to 0.15 mg of IF1/g of cells. The IF1 was isolated within one day by the centrifugatioin of the ribosomal washed fraction, by ammonium sulfate fractionation, chromatography on batch of phosphocellulose, and FPLC Mono S. The overexpressed IF1 was found to be comparable to the factor isolated from normal cells, as determined by migration in NEPHGE/SDS 2-D gels. For binding of fMet-tRNA(fMet) to the 30 S ribosomal subunitis, relatively high levels of binding were obtained when IF2 was present. The addition of IF1 up to 110 pmol proportionally stimulated the binding to a variable extent. This IF1-dependent stimulation of the 30 S preinitiation complex formation demonstrated that IF1 would appear to be exclusively essential for promoting the initiation phase of protein synthesis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.12
• /
• pp.7155-7159
• /
• 2013

Background and Objective: Rectal washout with saline solution may theoretically prevent anastomotic recurrence in patients with resectable rectal cancer, although exact clinical effects have not yet been determined. In order to derive a more precise estimation of the relationship, the present meta-analysis was performed. Method: Relevant studies were identified by a search of Medline, Embase and Google Website with no restrictions to September 1, 2013, and included in the systematic review and meta-analysis. Results: 5 trials (642 participants) were included to assess the association between rectal washout with saline solution and anastomotic recurrence. The rate of anastomotic recurrence (AR) was 6.23% (40/642), with the pooled OR derived from the five studies being 0.32 (95 % CI=0.15-0.70, P=0.004). The pooled OR derived from the TME and radical resection subgroups were 0.72 (95%CI=0.16-3.12, P=0.66) and 0.51 (95%CI=0.13-1.96, P=0.32), respectively. Conclusion: Results from this analysis show that intra-operative rectal washout with mere saline solution largely reduces the risk of anastomotic recurrences in patients with resectable rectal cancer.

• Journal of Powder Materials
• /
• v.21 no.5
• /
• pp.355-359
• /
• 2014

Pt nanopowder-dispersed $SiO_2$ (SOP) films were prepared by RF co-sputtering method using Pt and $SiO_2$ targets in Ar atmosphere. The growth rate and Pt content in the film were controlled by means of manipulating the RF power of Pt target while that of $SiO_2$ was fixed. The roughness of the film was increased with increasing the power of Pt target, which was mainly due to the increment of the size and planar density of Pt nanopowder. It was revealed that SOP film formed at 10, 15, 20 W of Pt power contained 2.3, 2.7, and 3.0 nm of spherical Pt nanopowder, respectively. Electrical conductivity of SOP films was exponentially increased with increasing Pt power as one can expect. Interestingly, conductivity of SOP films from Hall effect measurement was greater than that from DC I-V measurement, which was explained by the significant increase of electron density.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.620-625
• /
• 2002

Considering the fuel consumption of car, a light structure of aluminum alloys is desired for car body nowadays. However, fusion welding of aluminum alloys has some problems of reduction of joint efficiency, porosity formation and hot cracking. ill the present work, investigation to improve the joint performance of laser welded joint has been carried out by addition of Cu, Ni, and Zr to A6N01 alloy welds. Aluminum alloy plate of 2.0mm in thickness with filler metal bar was welded by twin beam Nd:YAG laser facility (total power:5kW). The filler metals were prepared by changing the chemical compositions for adding the elements into the weld metal. Thirteen filler metal bars were prepared and pre-placed into the base metal before welding. Ar gas shielding with a flow rate of 10 l/min was used. The defocusing distance is kept at 0 mm. At travel speeds of 3 to 9 m/min and at laser power of 5kW (front beam 2kW rear beam 3kW), full penetration welds were obtained, whereas at travel speeds of 12 to 18 m/min and same power, partial penetration was observed. The joint efficiency of laser-welded joint was improved by the addition of Cu, Ni, and Zr due to the solid solution hardening, grain refining and precipitation hardening. The type of hardening has been further considered by metallurgical examination.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.48-56
• /
• 1989

Contact-type linear image sensors for facsimile have been fabricated by means of rf glow discharge decomposition method of silane. The dependence of their electrical and optical properties on rf power, $SiH_4$ flow rate, ambient gas pressure, $H_2SiH_4$ ratio and substrate temperature are described. The a-Si:H monolayer demonstriated photosensitivity of 0.85 and $I_{ph}/I_d$ ratio of 100 unger 100 lux illumination. However, this monolayer has relatively high dark current due to carrier injection from both electrodes, resulting in low $I_{ph}/I_{dd}$ ratio. To suppress the dark current we have fabricated $SiO_2/i-a-Si:H/p-a-Si:H:B$ multilayer film with blocking structure. The photocurrent of this multilayer sensor with 6 V bias became saturated ar about 20nA under 10 lux illumination, while the dark current was less than 0.2 nA. Moreover, the spectral sensitivity of the multilayer film was enhanced for short wavelength visible region, compared with that of the a-Si:H monolayer. These results show that the fabricated photocon-ductive film can be used as the linear image sensor of the facsimile.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.2
• /
• pp.106-111
• /
• 1999

The effect of the MG on the electrochemical charge-discharge properties of $CaNi_5$ hydrogen storage alloys was investigated under Ar and $H_2$ atmosphere. $CaNi_5$ alloy was partially decomposed to CaO and Ni phase during the MG process. The decomposition of $CaNi_5$ alloy was enhanced by the MG process which leads to crash and reformation of oxide layer on the alloy surface. As the MG process time increased, initial discharge capacity of the electrode was reduced, but the decay rate of the capacity compared to $CaNi_5$ alloys was slower. It may be described that the degradation of $MG-CaNi_5$ electrode was caused by the reduction of the reversible hydrogen reaction sites and increasing polarization resistance of hydrogen adsorption resulted from phase decomposition and disorder during the MG process, and/or by hydroxide formation during the electrochemical charge-discharge cycles.