• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.711-719
• /
• 2021

EBS has been producing numerous educational contents with traditional virtual studio production systems since the early 2000s and applied AR video production system in October 2020, twenty-years after. Although the basic concept of synthesizing graphic elements and actual image in real time by tracking camera movement and lens information is similar to the previous one but the newly applied AR video production system contains some of advanced technologies that are improved over the previous ones. Marker tracking technology that enables camera movement free and position tracking has been applied that can track the location stably, and the operating software has been applied with Unreal Engine, one of the representative graphic engines used in computer game production, therefore the system's rendering burden has been reduced, enabling high-quality and real-time graphic effects. This system is installed on a crane camera that is mainly used in a crane shot at the live broadcasting studio and applied for live broadcasting programs for children and some of the videos such as program introductions and quiz events that used to be expressed in 2D graphics were converted to 3D AR videos which has been enhanced. This paper covers the effect of introduction and application of the AR video production system on EBS content production and the future development direction and possibility.

• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.603-615
• /
• 1992

This study was undertaken to investigate the interrelationship between the growth change of mandible and the developmental age of growing girls in the longitudinal data from 7 years to 15 years. The data were obtained from maturation stage of cervical vertebrae through the serial lateral cephalogram, height increment records which was taken at one year interval, menarche date through interview. On the basis of findings of this study, the following conclusions were obtained. 1. In general the growth of mandible (Ar-Pog, Ar-Go, Go-Pog) showed two peaks of growth velocity. 2. The maximum growth of mandible (Ar-Pog, Ar-Go, Go-Pog) almost appeared between stage 3 and stage 4 in maturation of cervical vertebrae. 3. It showed the tendency that the maximum increment of height appeared faster than that of mandible (Ar-Pog, Ar-Go, Pog-Go). 4. The maximum growth of height almost appeared between stage 2 and stage 3 in maturation of cervical vertebrae. 5. It showed the tendency that the menarche appeared later than the maximum growth of mandible (Ar-Pog, Ar-Go, Pog-Go). 6. The menarche almost appeared at stage 4, stage 5 in maturation of cervical vertebrae.

• Journal of the Korean earth science society
• /
• v.29 no.5
• /
• pp.386-395
• /
• 2008

The absolute age of lapilli tuff in sedimentary formation that contains dinosaur fossils in the Boseong area, Korea was determined radiometrically against volcanic rocks below and above the fossil-bearing horizons. The sanidine in the lapilli tuff below the fossil-bearing horizon (Seonso formation) has an $^{40}Ar-^{39}Ar$ age of $81.l{\pm}1.4Ma$. The Pilbong tuff above Seonso formation has an $^{40}Ar-^{39}Ar$ age of $81.0{\pm}2.4Ma$. An andesite dyke intruding all sedimentary units yields an $^{40}Ar-^{39}Ar$ age of $42.4{\pm}2.5Ma$. Thus 81 Ma age can be regarded as the best estimate for the age of the Seonso Formation and the associated the dinosaur eggs. This age correlates well with dinosaur fossil finds in the Haenam and Koseong regions of Korea. The occurrence of dinosaur eggs and clutches attests to the existence of dinosaurs in southern Korea at least inCampanian times.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.658-661
• /
• 2008

This study aims to suggest a methodology for developing the AR-4D CAD system which can improve construction progress control process by using augmented reality(AR) technology for civil engineering project. This study reviews practical application of AR process in 4D CAB system and suggests the detailed requirements, information flow system and integrated interface function for developing AR-4D CAD system. Through these methods, this research classifies main functions of AR-4D CAD system that can visualize construction progress control data, and suggests an operation scenarios of the system.

• Fashion & Textile Research Journal
• /
• v.21 no.6
• /
• pp.730-742
• /
• 2019

This study investigated the influence of the perceived characteristics of AR fashion retail technology on value co-creation and continued use intention. This study also examines the moderating role of technology readiness in the effects of the perceived characteristics of AR fashion retail technology on value co-creation. A total of 241 university students who had experience using AR fashion retail technology completed the questionnaire. The results were as follows. First, there were five factors in the perceived characteristics of AR fashion retail technology: presence, aesthetic attractiveness, ease of use, shopping usefulness, and perceived enjoyment. Second, aesthetic attractiveness, shopping usefulness, and perceived enjoyment had positive impacts on value co-creation. Third, value co-creation had a positive impact on continued use intention of AR retail technology. Fourth, there were significant differences in the effect of aesthetic attractiveness and shopping usefulness on value co-creation by the innovativeness dimension of technology readiness. Fifth, there was a significant difference in the effect of ease of use on value co-creation by the optimism dimension of technology readiness. The results of this study should provide guidance for marketers or retailers interested in the application of AR fashion retail technology in their stores.

• Analytical Science and Technology
• /
• v.30 no.2
• /
• pp.82-88
• /
• 2017

Adenophorae Radix (AR) is a frequently used medicinal herb; because of its popularity, products containing similar herbal products are often sold as substitutes, especially if their morphology is similar. However, any analytical method to identify AR based on quantitative analysis is not registered in Korea, Japan and China Pharmacopoeias. This study developed a simple HPLC method to discriminate between authentic AR and substitutes. Linoleic acid was used as a marker compound of AR. Our optimized HPLC-UV conditions included a mobile phase of 90 % acetonitrile under isocratic condition, and a flow rate of 1.0 mL/min at room temperature. Detection wavelength was set at 205 nm. Linoleic acid was detected at 13.5 minutes for a total analysis time of 20 minutes. The standard herb of AR contained 0.025 % of linoleic acid, while four authentic AR samples and eight substitutes contained 0.040~0.071 % and 0.004~0.014 %, respectively. Comparison of the linoleic acid concentrations of the sample types to reference AR showed that among 12 samples, only the four samples were authentic. Thus, our HPLC-UV method, along with our suggested content criterion for linoleic acid concentration, can be used for the quick and accurate determination whether the herbal products are authentic AR or substitute.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.20-27
• /
• 1996

A stable and accurate inverse method for extracting potential from spectroscopic data studied. The method is based on the Tikhonov regularization method to overcome the possible instability of nonlinear inverse problems using a priori smooth properties of the potential energy surface. The merit of this method is to treat the potential as continuous functions of the intermolecular coordinates instead of the conventional parameter fitting of restricted potential forms. Numerical study for the Ar-Ar show that from spectroscopic data the exact potential has been recovered whole region and the discrepancies by the dispersion force observed at the large distance between the exact and Morse potential or from RKR method can be eliminated by this method.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1744-1746
• /
• 2001

In this paper, we investigated the breakdown characteristics of Ar, Kr and $N_2$ gas in pure states with pressure range of 58.8-137.3[kPa] under uniform and non-uniform fields, and the measured values are compared with those in Ar/$N_2$ gas mixtures. From these results, the breakdown voltages of $N_2$ gas in uniform field were increased about 4.8 and 4.4 times than those of Ar and Kr gas, respectively. Breakdown voltages of Ar/$N_2$ gas mixtures were decreased with decreasing the mixture ratio of $N_2$ gas. Breakdown voltages of Ar(70%)/$N_2$(30%) gas mixtures in the pressure of 101.3[kPa] (gap length : 3[mm]) were increased 1.9 times than those of pure Ar gas.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.7
• /
• pp.570-575
• /
• 2002

$SrBi_2Ta_2O_9$ thin films were etched in $Cl_2/CF_4/Ar$ inductively coupled plasma (ICP). The maximum etch rate was 1300 ${\AA}/min$ at 900 W ICP power in Cl$_2$(20%)/$CF_4$(20%)/Ar(60%). As RF source power increased, radicals (F, Cl) and ion ($Ar^+$) increased. The influence of plasma induced damage during etching process was investigated in terms of P-E hysteresis loops, chemical states on the surface, surface morphology and phase of X-ray diffraction. The chemical states on the etched surface were investigated with X-ray spectroscopy and secondary ion mass spectrometry. After annealing $700^{\circ}C$ for 1 h in $O_2$ atmosphere, the decreased P-E hysteresises of the etched SBT thin films in Ar and $Cl_2/CF_4/Ar$ plasma were recovered.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.5
• /
• pp.374-383
• /
• 2013

Various interaction techniques have been studied for providing the feeling of touch and improve immersion in augmented reality (AR) environments. Tangible AR interaction exploiting two types (product-type and pointer-type) of simple objects has earned great interest for cost-effective design evaluation of digital handheld products. When the sizes of markers attached to the objects are kept big to obtain better marker recognition, the pointer-type object frequently and significantly occludes the product-type object, which deteriorates natural visualization and level of immersion in an AR environment. In this paper, in order to overcome such problems, we propose tangible AR interaction using fingertip touch combined with small-sized markers. The proposed approach facilitates the use of convex polygons to recover the boundaries of AR markers which are partially occluded. It also properly enlarges the pattern area of each AR marker to reduce the sizes of AR markers without sacrificing the quality of marker detection. We empirically verified the quality of the proposed approach, and applied it in the process of design evaluation of digital products. From experimental results, we found that the approach is comparably accurate enough to be applied to the design evaluation process and tangible enough to provide a pseudo feeling of manipulating virtual products with human hands.