• Bulletin of the Korean Chemical Society
• /
• 제28권9호
• /
• pp.1477-1484
• /
• 2007

Artificial neural networks (ANNs), for a first time, were successfully developed for the prediction partial molar heat capacity of aqueous solutions at infinite dilution for various polar aromatic compounds over wide range of temperatures (303.55-623.20 K) and pressures (0.1-30.2 MPa). Two three-layered feed forward ANNs with back-propagation of error were generated using three (the heat capacity in T = 303.55 K and P = 0.1 MPa, temperature and pressure) and six parameters (four theoretical descriptors, temperature and pressure) as inputs and its output is partial molar heat capacity at infinite dilution. It was found that properly selected and trained neural networks could fairly represent dependence of the heat capacity on the molecular descriptors, temperature and pressure. Mean percentage deviations (MPD) for prediction set by the models are 4.755 and 4.642, respectively.

• 한국표면공학회지
• /
• 제50권2호
• /
• pp.131-139
• /
• 2017

본 기술해설은 일본의 표면 처리 학술지인 표면기술(表面技術) (2013년, 64권 2호)에 게재된 'Eh-pH 도표의 표면기술에의 응용'이라는 제하의 총 6편의 논문으로 구성된 소특집 중 두 번째인 '전위-pH 도표를 이용한 금속 나노입자 형성 프로세스 구축' 논문을 소개한 것으로서, 원문을 읽고 싶다면 표면기술(表面技術)을 참조하길 바란다.

• 한국염색가공학회지
• /
• 제4권3호
• /
• pp.65-73
• /
• 1992

To control the hydrolysis rate of PET fabric with NaOH, HCl and $CH_3$COOH(HAc), as regulating reagent, were added to the 0.5 M NaOH solution. The concentrations of acids in 0.5 M NaOH were varied. PET fabrics were treated with aqueous solutions of acids in 0.5 M NaOH under different conditions. The weight loss of PET fabric, the rate of hydrolysis, the apparent activation energy (E$_{\alpha}$), the handle value, the etched surface of treated PET fabric, and the effect of salts such as NaCl, $CH_3$COONa(NaAc), and NH$_4$Cl on the weight loss were discussed. Acids in the aqueous 0.5 M NaOH solution decreased the weight loss of PET fabric bacause of neutralization of OH- and the weight loss of PET fabrics treated with corresponding concentration of aqueous NaOH solution to the concentrations of the aqueous solutions of acids in 0.5 M NaOH was lower than that of PET fabrics treated with aqueous solutions of acids in 0.5 M NaOH. The addition of NaCl to aqueous NaOH solution accelerated the reaction of OH- with PET greatly, the addition of NaAc increased the weight loss slightly, but the addition of NH$_4$Cl decreased the weight loss. It was thought that the very remarkable result that NaCl in aqueous NaOH solution promoted the hydrolysis of PET with NaOH would contribute to the conservation of energy and NaOH in the weight loss finishing process of PET fabric. The etched surface and the handle value of treated PET fabric were independent of the difference in the kinds of acids and salts added.nd salts added.

• 한국염색가공학회지
• /
• 제17권3호
• /
• pp.34-42
• /
• 2005

In this work, a practical separation performance was investigated on aqueous alcohol solutions, especially for iso-propyl alcohol (IPA), which is usually used during the semi- conductor rinsing process. The removal of various substances from waste aqueous IPA solutions was carried out by microfiltration with $0.1\~1{\mu}$m pore size of mean diameter as a pre-filter. Permeability and molecular weight cut-off of the functional polysulfone(PSf) ultrafiltration membrane to purify waste aqueous IPA solutions were measured through the ultrafiltration test. The solute rejection of PSf membrane had $92\%$ in 1,000ppm aqueous PEG solution with PEG molecular weight 10,000, the molecular weight cut-off had 10,000. The IPA concentration on the $CMPA-K^+$ membrane performance using pervaporation module system could be increased from $95.04 wt\%$ to more than $98.50wt\%$ in about 9hr at operation temperature of $70^{\circ}C$ using the pervaporation module system.

• 한국의류학회지
• /
• 제37권8호
• /
• pp.1130-1138
• /
• 2013

We examined dyeing properties using cotton, Tencel, general nylon 66 and hollow nylon 66 treated with aqueous and ethanol extracts without mordant. The antimicrobial properties of fabrics treated with Artemisia extracts against gram positive Staphylococcus aureus (S. aureus) and gram negative Klebsiella pneumonia (K. pneumonia) were also examined. The dying solution concentrations were determined from a calibration curve of the concentration and absorbance of Artemisia extracts. FTIR spectra confirmed that antimicrobial components and colorants (such as 1,8-cineol, thujone, caffeoylquinic acid and chlorophyll) were more present in ethanol extract than in aqueous extract. Nylons had higher $a^*$ and $b^*$, and lower $L^*$ values than cellulose fabrics dyed with aqueous solutions of Artemisia extracts; however, the dyed nylon fabrics were brown. Fabrics dyed with ethanol-extract added solutions were greener and had higher antimicrobial properties than those dyed with aqueous solutions; however, they faded and lost their antimicrobial properties after laundering. Fabrics regained their antimicrobial properties (especially against S. aureus) by the spraying of Artemisia ethanol extract; therefore, the application of Artemisia ethanol extract onto underwear is expected to relieve atopic dermatitis.

• Corrosion Science and Technology
• /
• 제18권3호
• /
• pp.110-116
• /
• 2019

Resistances to pitting corrosion of additive manufactured (AM) Ti-6Al-4V alloys in 0.6 M NaBr and 0.6 M NaCl aqueous solutions were compared using micro-droplet cell techniques. With respect to the pitting corrosion resistance, this study focused on two different types of halide anions in aqueous solutions, i.e. $Br^-$ and $Cl^-$. The differences between $Br^-$ and $Cl^-$ halide anions for breakdown on passive films of AM Ti-6Al-4V alloy were explained using Langmuir adsorption model with their equilibrium adsorption coefficients. The results of the analysis showed that the lower resistance to pitting potential of AM Ti-6Al-4V alloy in $Br^-$ aqueous solution was attributed to the higher equilibrium adsorption coefficient of Br-. In addition, micro-electrochemical test results showed that the pitting corrosion resistance of dark grains in additive manufactured Ti-6Al-4V alloy was lower as compared to that of bright grains due to the larger volume of ${\alpha}^{\prime}$ phase that caused the susceptibility to pit initiation.

• 한국염색가공학회지
• /
• 제24권3호
• /
• pp.165-172
• /
• 2012

The stability of yellow and red dyes prepared from safflower (Carthamus tinctorius L.) in aqueous solution and in solid state was investigated. External factors such as light irradiation and temperature on the stability were examined during storage. Changes in absorbance of dye solutions and the color changes of fabrics dyed after long time storage were measured. Also, color reproducibility during storage was investigated by dyeing test on various fabrics. Red colorant in aqueous solution was very unstable to light, resulting that about 40% of absorbance were lost in 12hrs. The absorbance of yellow dye solutions was not decreased within 84hrs. In aqueous medium, yellow dye was much more stable than carthamin. Both dyes are relatively stable for long storage when they are stored in solid state compared to when in aqueous solution. Color changes are marginal in both dyes.

• Bulletin of the Korean Chemical Society
• /
• 제26권1호
• /
• pp.47-50
• /
• 2005

Solvatochromic fluorescence behavior of 8-aminoquinoline based benzothiazole derivative in varying solvent systems has been investigated. Benzothiazole appended 8-aminoquinoline 3 showed distinctive fluorescence color changes depending upon the solvent polarities and the fluorescence color changes occurred over relatively wide span in visible region from 486 nm to 598 nm which can be detected with naked eye. Compound 3 also exhibited significant spectral shifts in ${\lambda}_{em}$ as a function of water composition in binary aqueous solvent systems. The changes are due to the specific interaction of 3 by hydrogen bonding with water as well as general solvent effect. The observed solvatochromic fluorescence characteristics of 3 could be used as a new probe for the micro-environmental polarity changes as well as a sensitive sensor for the determination of water composition in binary aqueous solutions.

• 대한화학회지
• /
• 제35권5호
• /
• pp.452-460
• /
• 1991

메탄올-물 혼합용매 및 수용성 CTAB, SDS 용액에서 2-에틸안트라센[2-EA]과 9-페닐안트라센[9-PA]에 빛을 조사하는 동안 1,3-디페닐이소벤조푸란[DPBF]이 감소되는 것으로부터 이 반응에 단일항 산소$(^1O_2)$가 관여된다는 화학적 증거를 얻었다. 용매의 극성에 민간함 UV 분광학적 특성을 이용하여 2-EA와 9-PA의 평균미세환경의 극성을 조사하였다. 2-EA와 9-PA가 수용성 CTAB, SDS 및 Brij 35 용액에 가용화될 때 그들의 평균 미세환경은 극성이었으며, 미세환경의 극성 파라미터는 미셀의 이온성에 영향을 받지 않았다. 2-EA의 평균 미세환경의 극성은 40%(w/w) 에탄올 수용액의 극성과 비슷했으며, 9-PA의 경우는 30%(w/w)와 40%(w/w) 사이의 에탄올 수용액의 극성과 비슷했다. 이들 화학종들이 수용성 미셀용액에 가용화될 때 대부분 미셀의 표면에 분포할 것이라는 것을 알았다. 여러 용매에서 2-EA와 9-PA의 광증감능을 검토하였다. 메탄올-물 혼합용매가 수용성 미셀용액보다 광산화반응에 유리한 것으로 나타났다.

• 한국대기환경학회지
• /
• 제23권5호
• /
• pp.539-546
• /
• 2007

Increasing emission of $CO_2$ significantly effects the global warming. Chemical absorption is one of separation methods of $CO_2$ from the industrial flue gases. In this study, the $CO_2$ removal efficiency as well as the $CO_2$ absorption amount of aqueous AMP (2-amino-2-methyl-1-propanol) solutions were measured using the continuous absorption and regeneration apparatus. We investigated the effect of aqueous AMP+AEPD(2-amino-2-ethyl-1, 3-propanediol) and AMP+TIPA (triisopropanolamine) solutions to enhance absorption characteristics of AMP. As a result of this study, the absorption amount and $CO_2$ removal efficiency were increased with adding TIPA into 30 wt.% AMP. The absorption amount and $CO_2$ removal efficiency of aqueous 30 wt.% AMP+5 wt.% TIPA solution were $1.70\;kg-CO_2/kg-absorbent$ and 91.1%, while those of aqueous 30 wt.% AMP solution were $1.58\;kg-CO_2/kg-absorbent$ and 89.3%. In addition, aqueous 30 wt.% AMP+5 wt.% TIPA solution used in the study revealed the high stripping efficiency, which was almost 98%, at the temperature of $110^{\circ}C$. Thus, the temperature of regenerator should be operated at $110^{\circ}C$.