• Journal of Electrochemical Science and Technology
• /
• v.10 no.4
• /
• pp.387-393
• /
• 2019

Activated carbons (ACs) are considered important electrode materials for supercapacitors because their large specific surface areas lead to high charging capacities. In the conventional synthesis of ACs, a substantial amount of carbon is lost during carbonization of a precursor. The development of a method to synthesize ACs in high yield would lower their manufacturing cost. Here, we demonstrate the synthesis of high-specific-surface-area NaOH-AC from carbon prepared via a hydrothermal carbonization (HTC) route, with a higher yield than that achieved through conventional pyrolysis carbonization. The amorphous carbon was derived from HTC of sugar and subsequently activated at 800℃ with various NaOH etchant/C ratios under a N₂ atmosphere. The AC prepared at 4:1 NaOH/C exhibited the highest surface area (as high as 2,918 ㎡ g^-1) and the highest specific capacitance (157 F g^-1 in 1 M aqueous Na₂SO₄ electrolyte solution) among the NaOH-AC samples prepared in this work. On the basis of their high specific capacitance, the NaOH-ACs prepared from HTC sugar are suitable for use as electrode materials for supercapacitors.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.2
• /
• pp.68-72
• /
• 2007

The flow properties of sulfated polysaccharides purified from the ascidian Halocynthia roretzi tunic were investigated. The sulfated polysaccfarides produced aqueous solutions of low apparent viscosity with pseudoplastic flow behavior. The respective activation energies of TCA-treated and TCA-nontreated solutions were $2.2248{\times}10^4\;and\;1.442{\times}10^4J/kg{\cdot}mol$ at a 150L/s shear rate. The viscosity of the sulfated polysaccharides solution was increased by the addition of sugar, while it was not changed by the addition of NaCl.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.120.1-120
• /
• 2003

White rot on Allium species recently had a high incidence as increased cultivating areas of tropical garlic types in Korea. Two types of Sclerotium have been known as causal agents producing different size and shapes of sclerotia in infested fields. We developed a new method for isolation of two types of sclerotia from infested field soils that can be used for ecological study of sclerotium spp. and establishment of control strategy. Soil samples collected from heavily infested fields were evenly mixed and placed on a automatic sieve shaker connected with tap water. After 10 min. of shaking, residues on 0.5mm and 0.25mm sieve were separately collected and suspended with 70％ sugar solution, which method floats sclerotia in aqueous layer. Then, floated fraction was carefully separated and mixed with a same volume of 1％ sodium hypochlorite solution to differentiate with organic materials. This method provides direct count of sclerotia under dissecting microscopy.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.11
• /
• pp.434-443
• /
• 2016

The evaporation of water from an aqueous solution is widely used in the food, desalination, pulp, and chemical industries. Usually, a large amount of energy is consumed in the evaporation process to boil off water due to atmospheric pressure. As a way of improving the energy efficiency of the evaporation process, the combination of multiple effect evaporation and thermal vapor recompression has been proposed and has become a successful technique. In this study, 4 multiple-effect falling film type evaporators for sugar solution are designed and the energy efficiency of the system is analyzed in response to the selection of the steam ejector position. Energy efficiency is increased and vapor is more compressed in the steam ejector as the Thermal Vapor Recompression (TVR) is arranged in the rear part of the evaporator system. A simplified 0-dimensional evaporator model is developed using non-linear equations derived from mass balances, energy balances, and heat transfer equations. Steam economy is calculated to compare the evaporation performance of the 4 proposed evaporators. The entrainment ratio, compression ratio, and expansion ratio are computed to check the ejector performance.

• Food Science and Biotechnology
• /
• v.15 no.2
• /
• pp.168-172
• /
• 2006

Soy sauce was fermented at $20^{\circ}C$ for 100 days in onggi containers (ethnic Korean earthenware) which had been fabricated using three different glazing treatments: unglazed, glazed only on the outside, and glazed on both surfaces. The changes in microstructure and permeability characteristics of onggi containers were examined after fermentation of soy sauce. The effect of repeated use of onggi containers on the fermentation was analyzed by the contact between an aqueous model solution and the onggi containers used once for soy sauce fermentation. The levels of reducing sugar and free amino acids produced from the dissolved starch and protein, respectively, in the solution were compared between the new and reused onggi containers. The moisture permeance and gas permeabilities of the onggi jars were progressively reduced with continuing use for soy sauce fermentation, probably due to clogging of micropores by solid materials. After having been used once for fermentation, the microbial cells and/or enzymes immobilized on the surface or in the micropores of the onggi containers seemed to contribute to accelerating the hydrolytic reactions of starch and protein.

• Korean Journal of Food Science and Technology
• /
• v.21 no.3
• /
• pp.453-459
• /
• 1989

A strictly aerobic bacterium forming yeller pigment and a highly viscous polysaccharide was isolated. The bacterium was identified as Pseudomonas mendocia. The polysaccharide was presumed to be ${\beta}-glucan$ with o-acetyl group in its structure and the constituent sugar components were glucose and rhamnose in the molar ratio of 2.1: 1.0. The intrinsic viscosity was 64.73dl/g. The apparent viscosity of 1% aqueous solution was 428 mPa.s. at $42\;sec^{-1}$ and the yield stress of the solution was 8.89Pa. The polysaccharide did not have thermal stability but show pH and salt stability.

• Korean Journal of Materials Research
• /
• v.33 no.7
• /
• pp.315-322
• /
• 2023

In the present work, we address the new route for the green synthesis of manganese dioxide (MnO₂) by an innovative method named the solution plasma process (SPP). The reaction mechanism of both colloidal and nanostructured MnO₂ was investigated. Firstly, colloidal MnO₂ was synthesized by plasma discharging in KMnO₄ aqueous solution without any additives such as reducing agents, acids, or base chemicals. As a function of the discharge time, the purple color solution of MnO₄^- (oxidation state +7) was changed to the brown color of MnO₂ (oxidation state +4) and then light yellow of Mn²⁺ (oxidation state +2). Based on the UV-vis analysis we found the optimal discharging time for the synthesis of stable colloidal MnO₂ and also reaction mechanism was verified by optical emission spectroscopy (OES) analysis. Secondly, MnO₂ nanoparticles were synthesized by SPP with a small amount of reducing sugar. The precipitation of brown color was observed after 8 min of plasma discharge and then completely separated into colorless solution and precipitation. It was confirmed layered type of nanoporous birnessite-MnO₂ by X-ray powder diffraction (XRD), fourier-transform infrared spectroscopy (FT-IR), and electron microscopes. The most important merits of this approach are environmentally friendly process within a short time compared to the conventional method. Moreover, the morphology and the microstructure could be controllable by discharge conditions for the appropriate potential applications, such as secondary batteries, supercapacitors, adsorbents, and catalysts.

• Carbon letters
• /
• v.12 no.3
• /
• pp.143-151
• /
• 2011

Bagasse fly ash (BFA) is one of the important wastes generated in the sugar industry; it has been studied as a prospective low-cost adsorbent in the removal of congo red (CR) from aqueous solutions. Chemical treatment with $H_2O_2$ was applied in order to modify the adsorbability of the raw BFA. Batch studies were performed to evaluate the influence of various experimental parameters such as dye solution pH, contact time, adsorbent dose, and temperature. Both the adsorbents were characterized by Fourier-transform infrared spectrometer, energy-dispersive X-ray spectrophotometer and nitrogen adsorption at 77 K. Equilibrium isotherms for the adsorption of CR were analyzed by Langmuir, Freundlich and Temkin models using non-linear regression technique. Intraparticle diffusion seems to control the CR removal process. The obtained experimental data can be well described by Langmuir and also followed second order kinetic models. The calculated thermodynamic parameters indicate the feasibility of the adsorption process for the studied adsorbents. The results indicate that BFA can be efficiently used for the treatment of waste water containing dyes.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.141-144
• /
• 2000

Highly open porous polymer matrices are required for high density cell seeding, efficient nutrient, and oxygen supply to the cells cultured in the three dimensional matrices. However, there are severe problems of mass transfer limitations within the cell/scaffolds culture system. Thus we hypothesize that continuos-flow culture conditioning of cells with the scaffolds may improve the cell viability and the differentiated function. In this study, we fabricated porous PLGA scaffolds by using gas-foaming/salt-leaching method as previous described. Viscous PLGA gel paste contains ammonium bicarbonate particulates, acting as a gas-foaming agent as well as a salt-leaching porogen, were cast into Teflon mold and dried. Ammonium bicarbonate salt upon contact to an acidic aqueous solution evloves gaseous ammonia and carbon dioxide by itself. And we conjugated galactose moiety [AGA; $N-(aminobuty1)-O-{\beta}-D-galactopyranosyl-(1{\rightarrow}4)-D-glucoamide]$ to the terminal end group of a PLGA to increase the cell adhesion and matain the differentiated function of hepatocytes. Cell-seeded scaffolds were secured in a flow bioreactor chamber and exposed to continuous flow at 5 ml/min. As a result of our study, the high yield of hepatocytes attachment was accomplished by increasing the concentration of PLGA-AGA conjugate in polymer scaffolds and cells in the scaffolds under continuos flow condition maintained a high level of viability and albumin secretion rate of cultured hepatocytes showed a higher level that of control groups.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.9
• /
• pp.19-24
• /
• 2019

Purpose - In the digital era, technology advancement enables goods and services to be produced more efficiently but also create economy risk in the global economy including Indonesia. Previous studies stated that the risk can be mitigated through export diversification. This study investigates strategy to expand the markets for existing products and explore the potential market. Research design, data, and methodology - The criteria was followed using a review and considerations combination through the Focus Group Discussion (FGD) to determine the priority product in trading house of Indonesia. This study implemented market share to explore those products' markets and compare it to other ASEAN countries. Results - The Indonesian potential products are T-shirts, singlets and other vests of textile materials, knitted or crocheted (excluding cotton); food preparations; medicaments consisting of mixed or unmixed products for therapeutic or prophylactic purposes; soap in the form of flakes, granules, powder, paste or in aqueous solution; and cocoa powder, not containing added sugar or other sweetening matter. The market analysis also showed that Indonesia still had not optimally accessed yet the largest market in the world for each product. Conclusions - The government should focus more on increasing the competitiveness of those products, particularly in those global marketplaces.