• Nuclear Engineering and Technology
• /
• 제36권1호
• /
• pp.1-11
• /
• 2004

Two approximate methods for a cosmic radiation shielding calculation in low earth orbits were developed and assessed. Those are a sectoring method and a chord-length distribution method. In order to simulate a change in cosmic radiation environments along the satellite mission trajectory, IGRF model and AP(E)-8 model were used. When the approximate methods were applied, the geometrical model of satellite structure was approximated as one-dimensional slabs, and a pre-calculated dose-depth conversion function was introduced to simplify the dose calculation process. Verification was performed with mission data of KITSAT-1 and the calculated results were also compared with detailed 3-dimensional calculation results using Monte Carlo calculation. Dose results from the approximate methods were conservatively higher than Monte Carlo results, but were lower than experimental data in total dose rate. Differences between calculation and experimental data seem to come from the AP-8 model, for which it is reported that fluxes of proton are underestimated. We confirmed that the developed approximate method can be applied to commercial satellite shielding calculations. It is also found that commercial products of semi-conductors can be damaged due to total ionizing dose under LEO radiation environment. An intensive shielding analysis should be taken into account when commercial devices are used.

• 음성과학
• /
• 제11권2호
• /
• pp.211-216
• /
• 2004

In this paper, we present a fast encoding algorithm for vector quantization with an approximate Euclidean distance calculation. An approximation is performed by converting floating point to the near integer. An inequality between the approximate Euclidean distance and the nearest distance is developed to avoid unnecessary distance calculations. Since the proposed algorithm rejects those codewords that are impossible to be the nearest codeword, it produces the same output as conventional full search algorithm.

• Journal of Astronomy and Space Sciences
• /
• 제19권2호
• /
• pp.151-162
• /
• 2002

인공위성에서의 우주방사선 차폐계산을 위한 근사계산 방법으로 sectoring method를 적용하는 방법과 chord-length 분포를 이용하는 방법을 상세 계산 결과와 비교하였다. 저 궤도 위성인 우리별 1호를 대상으로 양성자의 차폐계산을 수행하였다. 이때 방사선환경은 AP-8 model을 이용하여 구한 SAA(South Atlantic Anomaly)지역으로 가정하였다. Sectoring method와 chord-length 분포를 이용하는 방법은 양성자가 물질내에서 직진한다는 기본적인 가정을 사용하므로 3차원 상세계산 결과와 비교하여 어느 정도의 오차를 갖는다. 그러나 우리별 1호를 대상으로 수행된 계산 결과에서 두 계측기 위치에서의 피폭량 예측은 2가지 근사모델이 모두 상세계산 결과와 근사하게 일치하였다.

• 대한수학교육학회지:수학교육학연구
• /
• 제13권1호
• /
• pp.77-94
• /
• 2003

This study attempts to compare the topic "approximate value" in mathematics text-books of the 2nd year of South Korean junior high schools and that of the 3rd year of North Korean high schools. In addition, a survey questionnaire was distributed to junior and senior high school students as well as to mathematics teachers in South Korea. Based on the results of the survey, this study attempts to uncover the issues within the current teaching methods of "approximate value" and proposes the directions in which the teaching of approximate value should go in order to enhance mathematical thinking power and creativity of the students. First, it Is necessary to teach students how an error applies to the real world. To accomplish this end, it may be worthwhile to consider introducing the relative errors with more seriousness. Second, it is more important to teach the way of thinking which is concealed in the background of the calculation methods of approximate values than to simply teach mere calculation methods. Third, it is necessary to teach the calculation of approximate value with more realistic examples. Fourth, It is needed to teach students what the differences are when the terminology of "approximately" and "about" is used in real life and in mathematics.

• Nuclear Engineering and Technology
• /
• 제16권4호
• /
• pp.202-216
• /
• 1984

Nodal method가 소격격자 해석방법의 하나로 정립됨으로써, 계산격자가 비교적 크더라도 각 격자의 평균출력분포를 정확히 계산할 수 있게 하는 균질화변수틀 찾는 방법이 중요하게 되었다. 본 연구에서는 simplified equivalence theory와 approximate node equivalence theory의 두가지 근사방법을 가압경수형 원자로 문제에 적응하여 시험하여 보았다. 균질화계산과 노심분석계산 방법으로서 analytic nodal method에 기초를 둔 ANM 코드를 개발하였다. 여러 균질화 방법외 정확성을 KTDD 코드에 의한 reference solution과 비교하여 본 결과, 균질화 계산은 핵연료영역에서는 영역별 핵연료집합체 계산으로, baffle과 reflector의 공존 격자영역은 이들을 포함하는 color set 계산으로 수행할 수 있음을 알았다. Approximate node equivalence theory에 입각해서 approximate homogenized cross-section들과 approximate discontinuity factor들의 균질화 변수를 사용하면 출력분포와 임계도가 각각 0.8%, 0,1% 오차 범위내에서 예측되었다.

• Journal of Magnetics
• /
• 제19권4호
• /
• pp.378-384
• /
• 2014

Optimization design and robust design are significant measures for improving the performance and reliability of electromagnetic devices (EMDs, specifically refer to relays, contactors in this paper). However, the implementation of the above-mentioned design requires substantial calculation; consequently, on the premise of guaranteeing precision, how to improve the calculation speed is a problem that needs to be solved. This paper proposes a new method for establishing an approximate model for the EMD. It builds a relationship between the input and output of the EMD with different coil voltages and air gaps, by using a user-defined interpolating function. The coefficient of the fitting function is determined based on a quantum particle swarm optimization (QPSO) method. The effectiveness of the method proposed in this paper is verified by the electromagnetic force calculation results of an electromagnetic relay with permanent magnet.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.210-212
• /
• 2013

The construction cost estimates during the design phase becomes the standard to judge profitability and validity, and is very important in various decision-makings by project owner. However, since approximate costs are quoted when many parts are undecided in the early stage of project, differences are bound to occur between the construction cost calculated through approximate quotation and that put into construction actually. Also, since in existing quotation works, quantity calculations have been dependent on the staff's manual work, involving error potential, and thus differences are likely in quantity calculation depending on the quotation staff's method of calculation. In this study, the process of creating space model to deduce 3D geometry information for approximate quotation in association with knowledge information and the expression for calculation of finishing area were proposed.

• Communications for Statistical Applications and Methods
• /
• 제27권2호
• /
• pp.255-268
• /
• 2020

A mixture of multivariate canonical fundamental skew t-distribution (CFUST) has been of interest in various fields. In particular, interest in the unsupervised learning society is noteworthy. However, fitting the model via EM algorithm suffers from significant processing time. The main cause is due to the calculation of many multivariate t-cdfs (cumulative distribution functions) in E-step. In this article, we provide an approximate, but fast calculation method for the in univariate fashion, which is the product of successively conditional univariate t-cdfs with Taylor's first order approximation. By replacing all multivariate t-cdfs in E-step with the proposed approximate versions, we obtain the admissible results of fitting the model, where it gives 85% reduction time for the 5 dimensional skewness case of the Australian Institution Sport data set. For this approach, discussions about rough properties, advantages and limits are also presented.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.123-128
• /
• 2000

A cracked-plate with a patch bonded on one side is treated with a crack-bridging model: assuming continuous distribution of springs acting between crack surfaces. the approximate weight function was introduced to obtain the stress intensity factor of patched crack subjected to residual stress or non-uniform stress. The stress intensity factors for the partially patched crack within finite plate or the patched crack initiated from a notch were successfully obtained by numerical calculation.

• Structural Engineering and Mechanics
• /
• 제74권5호
• /
• pp.635-655
• /
• 2020

The sag effect of long stay cables is one of the key factors restricting further increase in the span of cable-stayed bridges. Based on the formerly proposed concept of long stay cables lifted by an auxiliary suspension cable in cross-strait cable-stayed bridges, corresponding static approximate calculations and analytical theory based on catenary and parabolic cable configurations are established. Taking a main span 1400 m cable-stayed bridge as the research object, three typical lifting conditions and the whole process of auxiliary cable lifting are analyzed and discussed. The results show that the sag effect is effectively reduced. The support efficiency is only improved when the cables are lifted above the original cable chord. Reduction of the horizontal component force of the cable is limited. The equivalent elastic modulus and the vertical support stiffness of the lifted cables are significantly increased with increased horizontal projection length and not sensitive to the change of the lifting point position. The scheme of lifting the cable to the chord midpoint is more economical because of the less steel required for the auxiliary suspension cable, but its effect on improving the vertical support efficiency is limited. The support efficiency is better when the cable is lifted to the cable end tangential to the original cable chord, but the lifting force and the cross-sectional area of the auxiliary suspension cable are doubled. The approximate calculation results of the lifted cables are very close to the numerical analysis results, which verifies the applicability of the approximation method proposed in this study. The results of parabolic approximation calculations are approximately equal to that of catenary cable geometry. As the parabolic approximation analysis theory of lifted cables is more convenient in mathematical processing, it is feasible to use parabolic approximation analysis theory as the analytical method for the conceptual design of lifted cables of super-long span cable-stayed bridges.