• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.2
• /
• pp.1-6
• /
• 2023

When landing an aircraft descent-speed, wind around the airport, and regulations are important indicators for the pilot to decide whether to land in the Final Approach. In this study, in order to maintain a decent angle accessible to the airport, the pilot predicts an appropriate decent rate suitable for wind direction, wind speed, and speed to make a stable landing. To confirm this, the decent rate according to the speed and speed of wind was calculated using the information actually measured on the B737NG aircraft and compared with the theoretical figures. The purpose of this study is to ensure that the pilot can make a stable landing at a given FPM (Feet Per Minute) when a visual approach and non-normal approach is required at an airport designed with a somewhat higher descent angle.

• Journal of Korean Society of Transportation
• /
• v.12 no.2
• /
• pp.47-63
• /
• 1994

The purposes of this study are to identify Traffic Flow characteristics and to develop approach delay model of unsignalized intersection based on the travel speed in the conflicting area. The results of this study are as following ; 1. The cumulative frequency distributions of Left-turning speed show a few differences among approaches and they are distributed to lower range of speeds. On the other hand, those of through speed show obvious differences among bounds. The similar results also show in the analysis of Percentile speed. 2. The effectiveness of conflicting movements to travel speed in the conflicting area are analyzed using regression analysis. Left-turning speed model shows that Left-and Right-Conflicting speed. Through-speed model is also developed, when approaching through volume is less than 420vph. 3. Since the lost time due to the acceleration stop, and decelerlation is occured in the conflicting area, approach delay model is delivered using the travel speed models under the condition of small queuing delay.

• Journal of Information Processing Systems
• /
• v.15 no.3
• /
• pp.550-569
• /
• 2019

We propose approaches for improving Bloom filter in terms of false positive probability and membership query speed. To reduce the false positive probability, we propose special type of additional Bloom filters that are used to handle false positives caused by the original Bloom filter. Implementing the proposed approach for a routing table lookup, we show that our approach reduces the routing table lookup time by up to 28% compared to the original Bloom filter by handling most false positives within the fast memory. We also introduce an approach for improving the membership query speed. Taking the hash table-like approach while storing only values, the proposed approach shows much faster membership query speed than the original Bloom filter (e.g., 34 times faster with 10 subsets). Even compared to a hash table, our approach reduces the routing table lookup time by up to 58%.

• Journal of the Korean Society for Railway
• /
• v.3 no.4
• /
• pp.229-236
• /
• 2000

In this study, the unsteady flow field induced by a high-speed train passing through a tunnel is numerically simulated by using an axi-symmetric Euler Equation. The modified patched grid scheme applied to a structured grid system was used to handle the relative motion of a train. The hybrid-dimensional approach which mixed 1D and axi-symmetric dimension was used to reduce the computation time and memory storage. By employing the hybrid-dimensional approach, a long tunnel as much as 5 km was able to be simulated efficiently. The results show that the maximum pressure rise in the tunnel by the entrance of the train is a function of both train speed and train-tunnel cross-sectional area ratio. The unsteady pressure fluctuation in the tunnel and around the train was also investigated in the real condition; Korean high-speed train on the Seoul-Pusan line.

• Environmental Engineering Research
• /
• v.25 no.3
• /
• pp.366-373
• /
• 2020

The autonomous vehicles (AVs) could make a positive or negative impact on reducing mobile emissions. This study investigated the changes of mobile emissions that could be caused by large-scale adoption of AVs. The factors of road capacity increase and speed limit increase impacts were simulated using a conceptual modeling approach that combines a hypothetical speed-emission function and a traffic demand model using a virtual transportation network. The simulation results show that road capacity increase impact is significant in decreasing mobile emissions until the market share of AVs is less than 80%. If the road capacity increases by 100%, the mobile emissions will decrease by about 30%. On the other hand, driving speed limit increase impact is significant in increasing mobile emissions, and the environmentally desirable speed limit was found at around 95 km/h. If the speed limit increases to 140 km/h, the mobile emissions will increase by about 25%. This is because some vehicles begin to bypass the congested routes at high speeds as speed limit increases. Based on the simulation results, it is clear that the vehicle platooning technology implemented at reasonable speed limit is one of the AV technologies that are encouraging from the environmental point of view.

• International Journal of Railway
• /
• v.4 no.3
• /
• pp.70-73
• /
• 2011

Controlling the exterior and interior noise emission has become an important issue in the research and development of high speed trains. As the operating speed of the train increases, the noise emission characteristics are expected to deviate from that of the existing trains due to several changes in the basic train layout. For train speed in excess of 350 km/h in particular, the aerodynamic noise component starts to exceed the structure-borne noise component, and even an incremental speed increase is accompanied by a rapid elevation in the noise level. The present study presents an engineering approach for predicting the aerodynamic noise level at the design stage for high speed trains. The experimental noise measurements from test run of Korean high speed train under development are presented as a partial validation of the proposed approach. While the overall aerodynamic noise can be cast in a single power law relationship against the train speed, different parts of the train show power law relationships unique to each component.

• International Journal of Highway Engineering
• /
• v.16 no.2
• /
• pp.99-106
• /
• 2014

PURPOSES : This study is to develop Right-Turning Channelization Design Models of Semitrailer at Intersections by regression of vehicle tracking simulation. METHODS : Based on the literature review, it was indicated that right-turning channelization design guide of semitrailer is too complex and is not reflected turning speed and approach angle. To verify effectiveness of right turning semitrailer trajectories according to the changing turning speed and approach angle, vehicle tracking simulation was executed. And then, simulation results were analyzed for modeling design elements; minimum turning radius, swept path width, arc length, width of triangle island, of right-turning channelization using regression methods. RESULTS : When the turning speed is getting higher, minimum turning radius, arc length, width of triangle island increased and the approach angle lower, swept path width, arc length, width of triangle island reduced. The turning radius completely reflected by turning speed. CONCLUSIONS : In this research, it was investigated how much design elements are changed according to the turning speed and the approach angle of semitrailer. The developed right-turning channelization design models can help engineers to easy and comfortable design at various conditions.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.4
• /
• pp.43-57
• /
• 2005

Traditionally aircraft had descended in steps to level at the MDA(Minimum Descent Altitude) during the conduct of non-precision approach. This "de-stabilized" method of flying an instrument approach procedure is considered as a major contributing factor in CFIT(Controlled Flight Into Terrain) accident and increasing pilot workload. In the effort to reduce CFIT accident and pilot workload, VNAV(Vertical Navigation) Approach has been suggested as means to manage the vertical component of non-precision approach procedure.[1] But In the actual circumstances in Korea, VNAV has not been using to reduce them because of many restriction facts and no published VNAV chart in particular airport. Therefore we are suggesting Constant Vertical Speed Approach Method, which is required few restriction facts, and the pilots who are using this method will experience a similar method like a Glideslope during proceeding non-precision approach. Consequently, We are expecting to reduce CFIT accidents and pilot workload.

• Wind and Structures
• /
• v.18 no.6
• /
• pp.619-631
• /
• 2014

This paper proposes new criteria to fix hidden neuron in Multilayer Perceptron Networks for wind speed prediction in renewable energy systems. To fix hidden neurons, 101 various criteria are examined based on the estimated mean squared error. The results show that proposed approach performs better in terms of testing mean squared errors. The convergence analysis is performed for the various proposed criteria. Mean squared error is used as an indicator for fixing neuron in hidden layer. The proposed criteria find solution to fix hidden neuron in neural networks. This approach is effective, accurate with minimal error than other approaches. The significance of increasing the number of hidden neurons in multilayer perceptron network is also analyzed using these criteria. To verify the effectiveness of the proposed method, simulations were conducted on real time wind data. Simulations infer that with minimum mean squared error the proposed approach can be used for wind speed prediction in renewable energy systems.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.126-127
• /
• 2003

In the generalized characteristic coordinate system (GCCS) proposed by Wu and Shi [1], the frame moves at a speed which is a linear combination of the convective speed and the sound speed, thus unifying the classical Eulerian approach, Lagrangian approach, and the unified coordinate system (UCS) of Hui and his co-workers [2]. Here some properties of Euler equations in the GCCS are studied and the advantages of GCCS in capturing expansion fans and shock waves are demonstrated by the results of numerical tests.