• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.42-46
• /
• 2006

As the next generation internet (NGI) is supporting High-speed in Gbps rate with the appearance of advanced network technologies, various applications that require high data rates. have been experimented and operated. By using high speed application services, many kinds of problems can be generated but we cannot easily grasp their reasons. However, if the user monitors the end-to-end one's flow data information (path and data rate in each router, state of each router) he can find them more accurately Until now, we have found out the fact that systems which can network-widely monitor end-to-end flow have not be developed yet, only simple systems which can monitor user's individual flow data at just one node are developed In this study, we suggest and materialize a system which can analyze bandwidth in real time by searching routing paths and measuring packet transfer rate between end-to-end flow data and supported flow traffic of using IPv6.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.100-106
• /
• 2017

Outline map is used for the description and reconstruction of the traffic accident. One way to produce the outline map is by adopting detailed measurements from the accident site such as final position of the vehicle and pedestrian, width of the road, and locations of the oil and tire marks. This method consumes large amount of time not to mention that of the production of detailed version as fine as the picture of the site. Aerial recording equipment so called HeliCam can produce an outline map that can substitute that of manual method with even faster production time and higher resolution. However, the produced picture have errors which are resulted by distortion due to the characteristics of camera and direction of the photographing. This paper provides correction of the distortion of oultline map produced by HeliCam using Adobe Photoshop and PC-Rect. The result showed resonable error range less than 6 cm(0.1%) for $60m{\times}30m$ area taken by HeliCam. The presented method develops outline map with small error, which is useful to traffic accident analysis, and traffic accident cases analyzed in this study were also.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.115-124
• /
• 2010

VDF(volume-delay function) is one of the most important factor to improve the reliability of traffic demand estimation because it is for estimation of link travel time based on the traffic volume variation. Because VDF of link except for freeway is applied as the parameter of BPR(bureau of public road) of U.S., it causes to deteriorate the accuracy of traffic demand estimation. The purpose of this paper is to establish new parameter of VDF based on the real-surveyed traffic data in order to improve the problem of the existing VDF. We suggest the reclassification of road hierarchy, the approach of traffic survey, the estimating method of VDF parameter, and the improvements of new VDF application. The new VDF allows us to estimate more realistic traffic situation in parts of demand, travel time and path between origin-destination.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.91-97
• /
• 2010

This study started from the problem recognition of climbing lane installed in Korea roads. Because design standards of climbing lane installed don't match traffic pattern of korean drivers, coefficient of utilization of climbing lane is low and merging section between climbing lane and main lane has traffic accident possibilities. For this, brand-new design standards developed from the present lane design criterion, taper lenghs, and traffic signs, then field adoption test was carried out to prove the effectiveness. As a result, coefficient of utilization of climbing lane and average traffic velocity in climbing section are improved and the economic analysis also shows that brand-new standards has high feasibility for low cost. In case of broad application to not only expressway but national and local road based on the study, it could be a significant contribution to traffic flow improvement.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.21-28
• /
• 2007

We suggest a new spatial linear interpolation method to substitute linear interpolation method which widely used in transportation engineering to impute the missing daily traffic volume. We layout daily traffic volume which is time series data over the virtual lattice space to consider the spatial correlation. We used Moran Index to evaluate the spatial correlations among daily traffic volume in same week and same date traffic volume by week considering the circularity of daily traffic volume. For real application, we used daily traffic volume on November, 2004 provided by Korea Institute of Construction Technology(KICT) and transformed daily traffic volume to 4 times 7 virtual lattice space to reflect the spatial correlation. Finally we showed that the spatial linear interpolation method has good performance for missing data imputation based on MAPE, RMSE, and Theil's U criteria.

• The KIPS Transactions:PartC
• /
• v.18C no.4
• /
• pp.243-250
• /
• 2011

Nowadays, the traffic type and behavior are extremely diverse due to the appearance of various services on Internet, which makes the need of traffic identification important for efficient operation and management of network. In recent years traffic identification methodology using statistical features of flow has been broadly studied. We also proposed a traffic identification methodology using payload size distribution in our previous work, which has a problem of low completeness. In this paper, we improved the completeness by solving the PSD conflict using IP and port. And we improved the accuracy by changing the distance measurement between flow and statistic signature from vector distance to per-packet distance. The feasibility of our methodology was proved via experimental evaluation on our campus network.

• Journal of Advanced Navigation Technology
• /
• v.28 no.4
• /
• pp.436-441
• /
• 2024

Urban air mobility (UAM) is an innovative air traffic management system that utilizes electric vertical take off and landing aircraft(eVTOL) to transport passengers and cargo in urban areas. The corridor can be defined as the airspace that the vehicle operates in and must be collaboratively managed. For the stable operation of UAM, it is essential to have strategic separation and a collaborative decision-making(CDM) system for cooperation and coordination among stakeholders. This study examines the application of time-based milestones from traditional air traffic flow management to the UAM system to ensure safe traffic volume and optimize air traffic flow. For traffic flow management, the milestone time information is categorized into a total of 13 key milestone time indicators based on the UAM movement status, and the sharing entities providing each time indicator and the flow of milestones are defined. Emphasizing the need for a CDM to balance UAM traffic and capacity, sharing and managing milestone information among stakeholders is expected to improve UAM aircraft departure flow and enhance operational efficiency.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.55-63
• /
• 2009

Since the introduction of 32 Automated Speed Enforcement System in Korea 1997, their application was expanded to the entire nation and, as of January 2008, there are 3,212 Automated Speed Enforcement System that are in operation. The existing method of evaluating the effects of the Automated Speed Enforcement System application is simple comparison of a year before and a year after the application. If the number of traffic accidents dramatically increased(or decreased) the year before the application compared to the numbers from years before that, then if the number decreased(or increased) after the Automated Speed Enforcement System application, it cannot be concluded that the change was caused by the Automated Speed Enforcement System application alone. Based on the 4-Step Before-After study, the method of evaluating the effect of an Automated Speed Enforcement System application was analyzed anew. At 205 locations where Automated Speed Enforcement System was applied in 2006, the existing evaluation stated a reduction of 19% in the number of traffic accidents, but when reanalyzed for the method suggested in this paper, the effect of the Automated Speed Enforcement System was found to be $27.4{\pm}3$, along with an error range of ${\pm}12.89%$ due to miscellaneous improvement.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.173-184
• /
• 2008

Development of an accident estimation model based on accident data can be made after accident occurrences. However, the taking of historical accident data is not easy, and there have been differences between real accident data and police-reported accident data. Also, another difficult shortcoming is that historical traffic accident data better consider driver behavior or intersection characteristics. A new method needs to be developed that can predict accident occurrences for traffic safety improvement in black spots. Traffic conflict decision techniques can acquire and analyze data in time and space, requiring less data collection through investigation. However, there are shortcomings: as existing traffic conflict techniques do not operate automatically, the analyst's opinion could easily affect the study results. Also, existing methods do not consider the severity of traffic conflicts. In this study, the authors presented traffic conflict decision criteria which consider conflict severity, including opposing left turn traffic conflict and cross traffic conflict decision criteria. In order to test these criteria, the authors acquired three signalized intersection images (two intersections in Sungnam city and one intersection in Paju) and analyzed the acquired images using image processing techniques based on individual vehicle tracking technology. Within the analyzed images, level 1 conflicts occurred 343 times over three intersections. Some of these traffic conflicts resulted in level 3 conflict situations. Level 3 traffic conflicts occurred 25 times. From the study results, the authors found that traffic conflict decision techniques can be an alternative to evaluate traffic safety in black spots.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.2
• /
• pp.139-149
• /
• 2012

Flooding caused by torrential rains and landslide causes the deaths of people and property damage as well as traffic congestion and isolation. Driver enters the dangerous area when driver doesn't recognize disaster information on the road and the damage is spread over time. In this paper, we will develop a smart phone application to collect dangerous disaster area information and a system based on C/S to manage the data received from the smart phone application. This system can analyze dangerous disaster areas using the data received from the smart phone application and the spatial database analyzed dangerous disaster areas is displayed in the smart phone application using a map server. We think that the suggested system provides more efficient information to user.