• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.3
• /
• pp.114-121
• /
• 2004

Switched reluctance motors have received much attention as a driving means for various industrial applications because they have simple construction, low cost and high efficiency. Nevertheless, the requirements of drive converters make it difficult to lower the overall system cost as compared with the DC motor application. Single phase switched reluctance motors (SPSRMs) provide a solution to the high cost problem since the number of switching power devices can be reduced and consequently the trials for application are increased. However, research involving SPSRMs, especially in the area of design work, is insufficient. This paper introduces a novel design methodology of single phase SRM. The design work for SPSRM comprises the determination of many variables such as stator and rotor pole arc as well as on, off and so on. Managing all variable combinations leads to lengthy computation time and a fault in the design process. For that reason, a reliable technique and brief procedure term are required in SPSRM design.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.137-150
• /
• 1997

To investigate the feasibility of a boom sprayer in the paddy field, an experimental boom sprayer for both broadcast and directed spraying to the lower part of rice plants was developed. The droplet deposition characteristics of the boom sprayers were experimentally compared to those of power sprayer. Water sensitive papers(WSP) and a machine vision system were used to evaluate the coverage rate and droplet density. It was shown that the broadcast application by the boom sprayer was the best coverage among the tested sprayers. Coverage tate and droplet density were affected by the distance between nozzles and the sprayer ground speed, The best result was obtained when the distance of 30cm and the speed of 1.7km/hr. The directed application showed inconsistency in overall droplet distribution. The inconsistency was judged to be caused by conflict between plants and boom extenders. The power sprayer showed a very wide range of droplet size distribution, relatively larger droplets and inconsistency in cove The power sprayer was judged to be inadequate for the low-volume precision application because of inconsistency in performance and difficulty in adjusting the spraying rate. Based on the droplet coverage characteristics, it was concluded that the self-propelled boom sprayer for the broadcast application was feasible for an alternative to the power sprayer in case of low volume, precision application in paddy condition.

• Journal of Power Electronics
• /
• v.3 no.3
• /
• pp.197-204
• /
• 2003

An improved nonlinear speed control of a permanent magnet synchronous motor (PMSM) is presented A quasi-linearized and decoupled model including the influence of parameter variations and speed measurement error on the nonlinear speed control of a PMSM is derived Using this model, to overcome the drawbacks of conventional nonlinear control scheme, the improved nonlinear control scheme which employs time delay control (TDC) scheme is proposed. To show the validity of the proposed control scheme, simulation studies are carried out and compared with the conventional control scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.212-212
• /
• 2000

This study was performed to construct a hot strip speed measuring system and check over whether the measured speed can be used for improving the mass flow of the head-end part of a hot strip in the 7-stand finishing mill. Because the mass flow in hot rolling mill affects the looper operation and the thickness and width control of a strip, accurate measurement of strip speed ie important. The measured speed was compared with the roll speeds of No. 6 and No.7 stand to check the performance of the system and analyzed to find how to apply the speed. As a result, it is shown that the accuracy of the system is enough, strip thickness error can be reduced by -275∼+200$\mu\textrm{m}$ using the measured speed and the existing FSU model has low accuracy for predicting forward slip rate. A neural network was developed to calculate forward slip rate instead of FSU model. The test result of the neural network shows that the neural network is more accurate than the FSU model.

• Journal of The Korean Association of Information Education
• /
• v.17 no.1
• /
• pp.23-31
• /
• 2013

Elementary students can easy access to the smartphones and also can have been interested with them. Elementary learning tools to use smartphones are effective at the learning. So, Smartphones learning tools used in scientific experiments, the learning effect would be nice. Elementary school students to learn speed learning areas is a difficult concept. Therefore, the speed of learning application for smartphones is required. In this study, we develop a module for learning speed. This module that use the acceleration sensors of smart phones extract data from a given point in time, calculated by integrating speed. In addition, the distance is calculated. Students experiment at speed so that you can immediately see the changes in the module proposed in this study has the advantage. Measure the speed of the existing tools students again need to calculate the speed of a hassle to experiment and measured data values are separated. That the module proposed in this study is expected to be able to overcome the disadvantage.

• Journal of Energy Engineering
• /
• v.15 no.3 s.47
• /
• pp.188-193
• /
• 2006

This paper intends to present theoretical study and its application result of the way of the temperature distribution embodiment through the production of subdivided nod's temperature from the average, maximum and minimum temperature following acoustic speed measurement with a set of acoustic speed meters at the arbitrary section in the furnace. By measuring the acoustic speed between the speed meters, flue gas temperature field can be determined. Then Subdivided arbitrary grid's temperatures can be infered out of surrounding nod's temperature distribution, and finally the entire grid's temperature distribution will be found. In this article, theoretical background, related system setup. and real application result are examined and discussed.

• Food Science of Animal Resources
• /
• v.32 no.3
• /
• pp.369-375
• /
• 2012

The current study was carried out to investigate the impact of extraction conditions on the free amino acid level and type in beef longissimus muscle. The sample blocks were chiller aged for 1 d and 7 d at $4^{\circ}C$. There are three homogenization speeds (11,000, 19,000 and 24,000 rpm) for bigger and two speeds (11,000 and 13,000 rpm) for smaller homogenizer's dispersing tools were used for evaluation. Results showed that chiller ageing greatly (p<0.05) increased extractable free amino acids, except cystine. Homogenization with the bigger dispersing tool at 24,000 rpm resulted in the highest free amino acid levels for both 1 and 7 d samples. Significant differences (p<0.05) in the mean values of most amino acids due to the effect of speed and interactions between ageing times. However, the speed effect and interaction between ageing with homogenization speed were not significant (p>0.05) for most of the amino acids except valine and isoleucine when using the smaller dispensing tools. The current data indicated that a standardized method for free amino acid types and levels of aged beef samples. In addition, the results also suggested that utilization of a big dispensing tool at high homogenization speed is a better condition for releasing free amino acid contents in beef samples.

• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.23-28
• /
• 2017

This paper is a study of the eddy current brake designed to replace the air brake of railway application. The eddy current brake has the advantage of being able to take a high current density compared to the other application because this brake is used for applying brakes to the rolling stock for a shorter amount of time. Also, this braking system has the merit of being able to take a high current density at low speed rather than at high speed, because the heat generated by the low speed operation is less than that of the high speed operation. This paper also presents a method of improving the output torque of the eddy current brake at low speed operation through a change of the winding as well as the basic design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2793-2800
• /
• 2011

The purpose of this research is to develop and optimize a lane departure warning application based on a smartphone which can be applicable as a new platform for various mobile information applications. Recently, a lane detection warning system which is a representative application among safe driving assistant solutions is being commercialized. Due to the necessity of powerful embedded hardware platform and its price, its market is still not growing. In this research, it is proposed to develop and optimize a lane departure warning application on iPhone 3GS. OpenCV is used for efficient image processing, and for lane detection a heuristic algorithm based on Hough Transform is proposed. The application was developed under Macintosh PC platform with Xcode 3.2.4 development tools, downloaded to the iPhone and has been tested on the real paved road. The experimental result has shown that the detection ratio of the straight lane was over 90% and the processing speed was 1.52fps. For the enhancement of the speed, a few optimization methods were introduced and the fastest speed was 3.84fps. Through the improvement of lane detection algorithm, additional optimization works and the adoption of a new powerful platform, it will be successfully commercialized on smartphone application market.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1548-1555
• /
• 2016

This paper presents an application of time series analysis in hourly wind speed simulation and forecast in Jeju Island, Korea. Autoregressive - moving average (ARMA) model, which is well in description of random data characteristics, is used to analyze historical wind speed data (from year of 2010 to 2012). The ARMA model requires stationary variables of data is satisfied by power law transformation and standardization. In this study, the autocorrelation analysis, Bayesian information criterion and general least squares algorithm is implemented to identify and estimate parameters of wind speed model. The ARMA (2,1) models, fitted to the wind speed data, simulate reference year and forecast hourly wind speed in Jeju Island.