• International Journal of Korean Welding Society
• /
• v.2 no.1
• /
• pp.15-20
• /
• 2002

This paper describes the weldability and mechanical behavior of JIS S45C medium carbon steel (corresponding to KS SM45C and SAE 1045) for machine structures in CW Nd:YAG laser welding. In general, medium carbon steels have a limited application to the industrial fields in spite of good mechanical characteristics. This is due to welding difficulty because of the high carbon contents and impurities in this material. Therefore, in this study the laser weldability of medium carbon steel with adjusted contents of S and P has been investigated in order to extend the application to medium carbon steels. Several experiments and numerical simulations have been conducted to determine the characteristics of mechanical behavior in CW Nd:YAC laser welds. The results of the simulations concur with the experiment results. From the result of this study, the application possibility of CW Nd:YAG laser welding to medium carbon steel has been confirmed. Also, the appropriateness of mechanical behavior simulation has been verified to analyze and predict the welding phenomena.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.651-652
• /
• 2007

• Journal of Drive and Control
• /
• v.5 no.3
• /
• pp.9-14
• /
• 2008

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1264-1267
• /
• 1987

In this study, a new implementation of an adaptive noise filter is proposed to eliminate timevarying 60Hz noise and its harmonics in ECG signal. The new technique was applied to the ECG and it was found in the experiment that it showed much better characteristics than conventional method.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.3
• /
• pp.295-299
• /
• 2000

The photoluminescence and cathodoluminescence of $SrGa_2S_4:EU$ phosphor were optimized with the process and chemical variables (activators, fluxes and reaction temperature) used in solid state reaction. Firing the powder with flux at $800^{\circ}C$ for 2hr gave the highest photoluminescence efficiency under near-UV excitation and the highest cathodoluminescence efficiency of 20.1 lm/W at 2 kV and 33.3 lm/W at 10 kV. The suitability of $SrGa_2S_4:EU$ for application as a phosphor in LCDs and FEDs is discussed.

• Spatial Information Research
• /
• v.8 no.1
• /
• pp.15-29
• /
• 2000

In the Recent rapidly changing technology environment the computerization of administration business which is driven or will be driven to give improved information services to people by local government or central government with a huge budget. The possibility of applying GIS application component to the computerization of administration business is investigated to prevent local government from investing redundant money and to reuse the existing investment at this point of time. Land civil service application component was developed at the $\ulcorner Development of Open GIS Component S/W \lrcorner$ project which was managed by Ministry of Information and Communication . GIS application component was based on Open GIS OLE/COM specification for development of standard interface and USD(Unified System Development ) for development method and UML (Unified Modeling Language) for system design and Visual C++ for component implementation. Implemented components were Process Control, Map, Print, Statistics component and were verified by using Visual Basic and Delhi. tis study shows that the development of component is very useful at the GIS application development for local governments. But the standard of business and data and system is the essential prerequisite to maximize business application.

• Journal of Korea Multimedia Society
• /
• v.3 no.2
• /
• pp.174-183
• /
• 2000

Formal methods for protocol description of a system is based on the implementation id S/W. However, the importance of H/W implementation for a parts of protocol design is increasing. The combination between H/W and IP technology is needed since the implementation environment is changing from S/W to H/W for implementation of specific application protocol. H/W implementation method starting with formal description procedure is essential to guarantree correctness and reliability of the implemented H/W by characteristic of formal description language. Inthis paper, for an automated H/W implementations, ESTELLE, a formal description method, is adopted. A transformation method from specification of ESTELLE to VHDL is suggested. This is an conceptual method that comparing and analyzing similarities between basic units of protocol description such as computation and communication unit and inter processors in H/W. Then we describe transformation model, and suggest example of transformation from ESTELLE to VHDL with Inres protocol.

• Tribology and Lubricants
• /
• v.15 no.1
• /
• pp.77-82
• /
• 1999

The processing conditions fur the synthesis of platelet W $S_2$ lubricant powder through a solid-gas reaction were optimized. The mixture of tungsten and sulfur powders were sealed in a vacuum of 10$^{-6}$ torr, prior to heat-treating at 85$0^{\circ}C$ fur 8 days. The reaction product showed a well-developed platelet W $S_2$ powder with an average size of 3.8 ${\mu}{\textrm}{m}$. The TGA/DTA analysis of the synthesized W $S_2$ powder was performed up to 120$0^{\circ}C$ at a rate of 1$0^{\circ}C$/min in flowing air (100 ${\mu}{\textrm}{m}$/min) atmosphere. The weight loss was about 6% up to 120$0^{\circ}C$ compared to the original weight. A rapid weight loss of about 5% occurred in the temperature range of 44$0^{\circ}C$ to 66$0^{\circ}C$ and an exothermic peak observed due to the transition of W $S_2$ to W $O_3$. The synthesized W $S_2$powder was coated on the commercial deep grooved ball bearing (No. 6203) to examine the effect of W $S_2$, coating layer on the noise and endurance of the ball bearing. The level of noise obtained from W $S_2$, coated-ball bearing (56 ㏈) was higher. than the value (32 ㏈) occurred in the case of greece lubrication. The endurance of the ball-bearing assembled after the coating of W $S_2$ powder onto each part increased 50 times compared to the non-coated ball-bearing..

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.669-678
• /
• 2018

This study developed information technology infrastructures for building a driving environment analysis platform using various big data, such as vehicle sensing data, public data, etc. First, a small platform server with a parallel structure for big data distribution processing was developed with H/W technology. Next, programs for big data collection/storage, processing/analysis, and information visualization were developed with S/W technology. The collection S/W was developed as a collection interface using Kafka, Flume, and Sqoop. The storage S/W was developed to be divided into a Hadoop distributed file system and Cassandra DB according to the utilization of data. Processing S/W was developed for spatial unit matching and time interval interpolation/aggregation of the collected data by applying the grid index method. An analysis S/W was developed as an analytical tool based on the Zeppelin notebook for the application and evaluation of a development algorithm. Finally, Information Visualization S/W was developed as a Web GIS engine program for providing various driving environment information and visualization. As a result of the performance evaluation, the number of executors, the optimal memory capacity, and number of cores for the development server were derived, and the computation performance was superior to that of the other cloud computing.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.3
• /
• pp.260-264
• /
• 1999

The combined activities of dextranase and amylase(DXAMase) from Lipomyces starkeyi KSM 22 produced from starch fermentation inhibited or prevented dental plaque formation. The activities were stable in commercial mouthwash products; DXAMase activity retained over 93％ of original activity after 6 months at 23℃. We examined the effects of enzyme inhibitors and active ingredients in mouthwash on DXAMase activity. The DXAMase was stable with 0.29％(w/v) EDTA, 20％ (v/v) ethanol, 0.05％ (w/v) fluoride, and 0.05％ (w/v) SDS. Among the active ingredients of mouthwash, sodium benzoate (up to 1 ％, w/v) had no inhibitory effect on either dextranase or amylase activity. In the case of cetylpyridinium chloride, the addition of 0.05％ (w/v) inhibited 6％ of dextranase activity and 13％ of amylase activity. Propylene glycol (up to 1％, w/v) showed no inhibitory effect on either enzyme activity. DXAMase (5 IU/㎖) in mouthwash could remove pre-formed films of glucan-bound S. mutans cells. The addition of 0.1 IU/㎖ DXAMase in mouthwash prevented the formation of insoluble-glucan. These in vitro properties of L. starkeyi KSM 22 DXAMase are desirable for its application as a dental plaque control agent.