• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.2
• /
• pp.117-127
• /
• 1982

Mulberry plants (Morus alba L.) were grown in pots with the following different nitrogen sources: ammonium sulphate, urea, ammonium nitrate, sodium nitrate + ammonium nitrate ($NO_3:NH_4$=2:1), and sodium nitrate. The effects of the nitrogen sources on mulberry yields, nitrogen recovery, distribution of ions and cation-anion balance (C-A) along leaf sequence and growth stage were investigated. The results were as follows: 1. Leaf yields and nitrogen recovery decreased with increasing $NO_3$-N application rates. 2. Relative cation contents in leaves in the early growth stages showed the following pattern : Na < Mg < Ca < K. However, the order of Ca and K reversed in the later stages. The order of anion contents chifted from $SO_4$ < $NO_3$ < Cl < $H_2PO_4$ in the early stages to $NO_3$ < Cl < $SO_4$ < $H_2PO_4$ in the later stages. 3. Contents of K, $H_2PO_4$, $SO_4$, $NO_3$, T-N and the sum of anion contents (${\sum}A$) were higher in upper leaves whereas Ca, Mg, Cl, the sum of cation contents (${\sum}C$) and (C-A) were higher in lower leaves. 4. When $NO_3$ in leaves decreased, Cl and K as counter-cations increased and consequently Ca decreased. 5. The (C-A) in leaves varied with leaf sequence and growth stage from 700 to 900 me/kg D.M.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.79-87
• /
• 2009

Pot experiments using sand culture were conducted in 2004 under greenhouse conditions to evaluate the effect of nitrogen deficiency on red pepper biomass. Nitrogen stress was imposed by implementing 6 levels (40% to 140%) of N in Hoagland's nutrient solution for red pepper. Canopy reflectance measurements were made with hand held spectral sensors including $GreenSeeker^{TM}$, $Crop\;Circle^{TM}$, and $Field\;Scout^{TM}$ Chlorophyll meter, and a spectroradiometer as well as Minolta SPAD-502 chlorophyll meter. Canopy reflectance and dry weight of red pepper were measured at five growth stages, the 30th, 40th, 50th, 80th and 120th day after planting(DAT). Dry weight of red pepper affected by nitrogen stress showed large differences between maximum and minimum values at the 120th DAT ranged from 48.2 to $196.6g\;plant^{-1}$, respectively. Several reflectance indices obtained from $GreenSeeker^{TM}$, $Crop\;Circle^{TM}$ and Spectroradiometer including chlorophyll readings were compared for evaluation of red pepper biomass. The reflectance indices such as rNDVI, aNDVI and gNDVI by the $Crop\;Circle^{TM}$ sensor showed the highest correlation coefficient with dry weight of red pepper at the 40th, 50th, and 80th DAT, respectively. Also these reflectance indices at the same growth station was closely correlated with dry weight, yield, and nitrogen uptake of red pepper at the 120th DAT, especially showing the best correlation coefficient at the 80th DAT. From these result, the aNDVI at the 80th DAT can significantly explain for dry weight of red pepper at the 120th DAT as well as for application level of nitrogen fertilizer. Consequently ground remote sensing as a non-destructive real-time assessment of plant nitrogen status was thought to be a useful tool for in season nitrogen management for red pepper providing both spatial and temporal information.

• Korean Journal of Weed Science
• /
• v.18 no.3
• /
• pp.179-185
• /
• 1998

This study was conducted to investigate changes in weed occurrence and dominance as affected by seeding dates in water seeded rice paddy under field following two years of no-tillage condition. The pre-emergence weeds in no-tillage paddy were controlled by glyphosate application at 7 days before seeding. The rice seeds were seeded on April 20, May 10 and May 30, respectively with 40kg/ha of seeding rate. The weed species in the paddy occurred included three species (Echinochloa cursgalli, Aneilma keisak, Ottelia alismoides) of annual weed, one species (Alopecurus aequalis) of biennial weed and five species (Eleocharis kuroguwai, Leersia japonica, Sagittaria pygmaea, Sagittaria trifolia, Potamogeton distinctus) of perennial weed respectively. Aneilma keisak was found to be dorminant on April 20 and May 10 but Eleocharis kuroguwai on May 30 based on number of weeds. The number and dry weight of weeds occurred were higher on May 10 as compared to in other seeding dates, while proportion of perennial weeds increased as the seeding date was delayed. In particular, weed dorminance varied marketly with seeding date. The Simpson's indices were 0.736 on April 20, 0.261 on May 10 and 0.281 on May 30, respectively.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.959-965
• /
• 2016

In 1994, a new cultivar 'Joyskin' was created from a cross between the cultivars 'Whangkeumbae' and 'Waseaka' at the Pear Research Institute of the National Institute of Horticultural and Herbal Science, Rural Development Administration. In 2006, the 'Joyskin' was selected from among the 317 seedlings resulting from the cross for its skin and taste qualities. Regional adaptation tests were conducted in nine regions and in ten experimental plots from 2006 to 2011. The cultivar was named in 2011. 'Joyskin' showed a vigorous growth habit and semi-spread characteristics similar to 'Whangkeumbae'. The average full bloom date for 'Joyskin' was April 21st, which was also similar to 'Whangkeumbae'. The optimum fruit ripening time was September 6-8th, which was six or eight days earlier than 'Whangkeumbae'. The fruit was round in shape and the skin was a golden yellow color at maturity. The average fruit weight was 320 g and the flesh firmness was $2.5kg/8mm{\varphi}$. The firmness of the fruit skin determined by a blade-type plunger of texture analyzer was 22.9 N, which was significantly different from that of 'Whangkeumbae' 29.9N. Stone cell analysis of 'Joyskin' by phloroglucinol-HCl, showed that 'Joyskin' stone cells were small in size and few in numbers cpmpared to those of cultivars of was 'Manpungbae', 'Niitaka', and 'Whangkeumbae'. The patent application for 'Joyskin' was submitted in April, 2012 (Grant No. 2012-337). In 2016, 'Joyskin' (Grant No. 5895) was registered as a separate record, with uniformity and stability per Korean Seed Industry Law.

• Journal of Energy Engineering
• /
• v.29 no.1
• /
• pp.85-99
• /
• 2020

This article analyzes the influence of sectoral system of innovation(i.e. technological regime, market demand, networks, and institution) on innovative performances(i.e. product-, process-, organizational-, marketing-, and environmental- innovation) in Korean environmental industry, conducting a multiple regression analysis based on survey data from 201 Korean environmental companies. As the results, product innovation is positively influenced by internal technology accumulation and market demand response, while not affected by external knowledge utilization, market competition, networks among market and non-market agents, government support and regulation. Process innovation is positively influenced by internal technology accumulation, networks among non-market agents and regulation, but not by external knowledge utilization, market demand response, market competition, networks among market agents, and government support. While organizational innovation is positively influenced by internal technology accumulation, external knowledge utilization and regulation, it is not affected by market demand response, market competition, networks among market and non-market agents, and government support. While marketing innovation is positively influenced by internal technology accumulation, networks among non-market agents, and government support, it is not affected by external knowledge utilization, market demand response, market competition, networks among market agents, and regulation. Environmental innovation is positively influenced by external knowledge utilization and regulation, but negatively influenced by market competition. It is not affected by internal technology accumulation, market demand response, networks among market and non-market agents, and government support. Such results suggests the following policy implications. First, it is necessary to expand the sphere of relating markets through the application of convergence technology, new regulations, and overseas markets. Second, reinforcing ecosystems among environmental market agents through demand-linked joint R&D should be revitalized. Third, it is needed to strengthen more supporting policies rather than regulation. This article has the limitation of using the survey data. And further researches on the environmental sectoral system of innovation structure itself will be tried.

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.232-239
• /
• 2008

The objective of this study is to estimate the shelf-life of Tteokgalbi containing dietary fiber extracted from rice bran by using the predictive microbiology. This Tteokgalbi was made with 0%, 1%, 2%, and 3% dietary fiber. The number of total viable cells, anaerobic, psychrotrophic, and heat-stable bacteria and coliforms was calculated during 15 days of storage under $4{\pm}1^{\circ}C$ and the obtained data was applied to Baranyi function. The evaluation of fitness between predicted and observed data showed that these were matched in a satisfactory way. Heat-stable bacteria was detected lower than <1 log CFU/g and coliforms were not detected during the storage. The changes of total viable cells and psychrotrophic bacteria in Tteokgalbi were increased gradually, but dramatically increased after 3 days of storage. The models of total viable cells and anaerobic bacteria showed very similar growth trends and values of growth parameters each other. The estimated shelf-life of each Tteokgalbi was calculated from the predictive model of total viable cells and the estimated shelf-life was 1.7, 2.3, 2.3, and 2.4 days, respectively. The results suggested that the prediction of bacteria growth could be used to evaluate the microbiological safety and determine the shelf-life of Tteokgalbi as ready-to-eat food in the local market.

• Journal of Radiation Protection and Research
• /
• v.33 no.1
• /
• pp.13-20
• /
• 2008

The flow rate measurements in a multi-phase flow pipeline were evaluated quantitatively by means of a clamp-on sealed radioisotope based on a cross correlation signal processing technique. The flow rates were calculated by a determination of the transit time between two sealed gamma sources by using a cross correlation function following FFT filtering, then corrected with vapor fraction in the pipeline which was measured by the ${\gamma}$-ray attenuation method. The pipeline model was manufactured by acrylic resin(ID. 8 cm, L=3.5 m, t=10 mm), and the multi-phase flow patterns were realized by an injection of compressed $N_2$ gas. Two sealed gamma sources of $^{137}Cs$ (E=0.662 MeV, ${\Gamma}$ $factor=0.326\;R{\cdot}h^{-1}{\cdot}m^2{\cdot}Ci^{-1}$) of 20 mCi and 17 mCi, and radiation detectors of $2"{\times}2"$ NaI(Tl) scintillation counter (Eberline, SP-3) were used for this study. Under the given conditions(the distance between two sources: 4D(D; inner diameter), N/S ratio: $0.12{\sim}0.15$, sampling time ${\Delta}t$: 4msec), the measured flow rates showed the maximum. relative error of 1.7 % when compared to the real ones through the vapor content corrections($6.1\;%{\sim}9.2\;%$). From a subsequent experiment, it was proven that the closer the distance between the two sealed sources is, the more precise the measured flow rates are. Provided additional studies related to the selection of radioisotopes their activity, and an optimization of the experimental geometry are carried out, it is anticipated that a radioisotope application for flow rate measurements can be used as an important tool for monitoring multi-phase facilities belonging to petrochemical and refinery industries and contributes economically in the light of maintenance and control of them.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.279-310
• /
• 2015

The Montreal Convention is an agreement that governs the liability of air carriers for injury and death to passengers travelling internationally by air. The Montreal Convention serves as the exclusive legal framework for victims and survivors seeking compensation for injuries or death arising from accidents involving international air travel. The Montreal Convention sets monetary liability caps on damages in order to promote the financial stability of the international airline transport industry and protect the industry from exorbitant damages awards in courts that would inevitably bankrupt an airline. The Convention allows a litigant suing under the Convention to avoid the liability caps in instances where the airline's culpability for the injury or death is the direct result of negligence, another wrongful act, or an omission of the airline or its agents. The Montreal Convention identifies specific locations as appropriate venues to advance claims for litigants seeking compensation. These venues are closely tied to either the carrier's business operations or the passenger's domicile. In March 2015, in an act of suicide stemming from reactive depression, the co-pilot of Germanwings flight 9525 intentionally crashed the aircraft into the French Alps killing the passengers and the remaining crew. Subsequent to the crash, there were media reports that Lufthansa made varying settlement offers to families of the passengers who died aboard the flight ranging from $8,300 USD to $4.5 Million USD depending on the passengers' citizenship. The unverified offers by Lufthansa prompted outcries from the families of the decedent passengers that they would institute suit against the airline in a more plaintiff friendly jurisdiction such as the United States. The first part of this article accomplishes two goals. First, it examines the Montreal Convention's venue requirement along with an overview of the recoverable damages from countries comprising the citizenship of the passengers who were not American. The intentional crash of Germanwings flight 9525 by its First Officer encompasses the possibility that Lufthansa may be exposed to unlimited compensatory damages beyond the liability caps contained in the Convention. The second part of this article explores the application of the Convention's liability limits to the Germanwings flight to demonstrate that the likelihood of escaping the liability limits is slim.

• Korean Journal of Poultry Science
• /
• v.47 no.3
• /
• pp.143-151
• /
• 2020

This study investigated the effects of the addition of commercial enzyme products to broiler feed with reduced levels of metabolizable energy and crude protein on the growth performance, blood profiles, and cecal microflora. A total of 750 seven-day-old male Ross 308 broiler chicks were randomly allotted to five treatment groups with six replicates (25 birds/replicate) for 28 days. A corn-wheat-soybean meal-based diet was formulated to meet or exceed the nutrient recommendations and used as the control diet. Experimental diets with metabolizable energy reduced by 100 kcal/kg and crude protein by 1% were formulated containing four different commercial enzyme products. Feed intake and weight gain were not affected by the dietary treatments; however, feed conversion ratios were significantly lower (P<0.01) in the control group than in the other treatment groups during the entire experimental period. There were no significant differences in the blood profiles and cecal microflora between the dietary treatments. However, the viscosity of jejunal contents in chicks fed a diet with enzyme B was significantly lower than that in the other groups. The tentative marketing age was unaffected by any of the dietary treatments, and ranged from 26.39 d to 26.84 d. Collectively, the use of commercial enzymes contributed to a similar weight gain as that in chicks fed diets with reduced energy and crude protein levels; however, it failed to maintain the feed conversion ratio.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.45
• /
• pp.191-238
• /
• 2010

The purpose of this paper is to make research on the trend of the worldwide medical device market, the trend of the medical device market in the major foreign countries, the present status of the medical device industry in Korea and Gangwon area, the present status of export competitive power and the SWOT analysis of competitive power of the medical device industry in Gangwon area, and the strengthening methods of export competitive power of the medical device industry in Gangwon area. As the research method, the questionaire for the strengthening of export competitive power of the medical device industry in Gangwon area was carried out from August 13 to Otober 22, 2009. The worldwide medical device market in 2008 is estimated at USD 210.2 billion, with the United States being the largest market, followed closely by Japan and Western Europe. In 2006, the worldwide export amount of medical devices recorded USD 121.1 billion and the worldwide import amount of medical devices recorded USD 126.3 billion. As of the end of 2008, the number of Korea's medical device manufacturers expanded to 1,726. The production amount of Korea's medical device industry in 2008 recorded 2,525 billion won, and the domestic market volume of medical devices in 2008 recorded 3,618 billion won. Korea's export amount of medical devices in 2008 recorded USD 1,132 million and recorded a 9.67% growth compared to the previous year, and the import amount of medical devices recorded USD 2,123 million and recorded a 1.43% reduction compared to the previous year. As of the end of 2008, the number of Gangwon area's medical device manufacturers expanded to 81. The production amount of Gangwon area's medical industry in 2008 recorded 380 billion won, and Gangwon area's export amount of medical devices recorded USD 269 million and recorded a 0.25% reduction compared to the previous year, and the import amount of medical devices recorded USD 3 million and recorded a 39.63% reduction compared to the previous year. According to the result analysis of the questionaire for the strengthening of export competitive power of medical device industry in Gangwon area(August 13~October 22, 2009), the competing country of the export medical device is the United States being the highest ranking. Comparing to the collective competitive power level 100 of the competing country, the collective competitive level of the export medical device is 60 below and 70-80 below being the highest ranking. Comparing to the quality level 100 of the United States, EU and Japan, the quality level of the export medical device is 80-90 below being the highest ranking. Comparing to the design level 100 of the United States, EU and Japan, the design level of the export medical device is 90-100 below being the highest ranking. Comparing to the technology level 100 of the United States, EU and Japan, the technology level of the export medical device is 80-90 below being the highest ranking. According to the SWOT analysis of competitive power of medical device industry in Gangwon area, the strength is the abundant expert manpower of the medical device in Wonju area. The weakness is the fragility of the brand recognition of the medical device industry. The opportunity is the demand increase of the new medical device owing to the advanced age of population. The threat is the difficulty of entry into overseas market owing to the request of the new specification certification of the medical device. In order to strengthen the export competitive power of the medical device industry in Gangwon area, the following measures should be taken by the government, local self-government body, related organization and medical device industry : the development of new technology and design, the enhancement of brand recognition. the acquisition of the foreign specification certification, the building of overseas distribution channel and after sales service channel, the positive participation in overseas medical device exhibition and opening of medical device exhibition, the training of expert manpower, the strengthening of overseas marketing, and the application of FTA and the establishment of counter measures against FTA. In conclusion, the medical device industry in Gangwon area has the difficulty in the entry into the overseas market owing to the shortage of overseas marketing capability. Therefore, the government and local self-government body should make the intensive and systematical support for overseas marketing of the medical device industry. For the support of overseas marketing, the government and local self-government body should provide positively the support of expenses for the acquisition of foreign specification certification, the support of participation in the overseas medical device exhibition, the despatch of market development mission, the increase of the support amount for R&D investment fund, and the training of expert manpower of medical devices.