• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.3
• /
• pp.67-78
• /
• 2013

In this paper, We proposed an development method of application framework for using the precision time protocol(PTP) based on physical layer devices to synchronize clocks across a network with IEEE1588 capable devices. The algorithm was not designed as a complete solution across all conditions, but is intended to show the feasibility of such a for the PTP(Precision Time Protocol) based on time synchronization of heterogeneous network between devices that support in IEEE 1588 Standard application framework. With synchronization messages per second, the system was able to accurately synchronize across a single heavily loaded switch. we describes a method of synchronization that provides much more accurate synchronization in systems with larger networks. In this paper, using the IEEE 1588 PTP support for object-oriented modeling techniques through the 'application framework development Development(AFDM)' is proposed. The method described attempts to detect minimum delays, or precision packet probe and packet metrics. The method also takes advantage of the Tablet PC(Primary to Secondary) clock control mechanism to separately control clock rate and time corrections, minimizing overshoot or wild swings in the accuracy of the clock. We verifying the performance of PTP Systems through experiments that proposed method.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3086-3096
• /
• 1999

To declare conformance of multi-protocol Implementation Under Test(IUT), every layer of the multi-protocol IUT should be tested. According to ISO9646, single-layer test method is applied to testing the highest layer of multi-protocol IUT and single-layer embedded test method is used for the layers by layer all the protocols in a multi-protocol IUT. This paper proposes a new method for testing a multi-protocol IUT. The proposed test method assumes that a multi-protocol IUT is under test and that the interfaces between the layers cannot be controlled or observed by the tester. We apply the proposed test method to TCP/IP and compare the application results with those of the existing test turns out that the proposed test method significantly reduces the number of test cases as well as the number of test events while providing the same test coverage. In addition, the proposed test method shows the capability to locate the layer that is source of failure in testing multi-protocol IUTs.

• Journal of Korea Multimedia Society
• /
• v.20 no.11
• /
• pp.1768-1775
• /
• 2017

The SIP(Session Initiation Protocol) is an application layer call signaling protocol which can create, modify and terminate the session of user, and provides various services in combination with numerous existing protocols. However, most of cryptosystems for SIP cannot prevent quantum computing attack because they have used ECC(Elliptic Curve Cryptosystem). In this paper, we propose a NTRU based authentication and key distribution protocol for SIP in order to protect quantum computing attacks. The proposed protocol can prevent various attacks such as quantum computing attack, server spoofing attack, man-in-the middle attack and impersonation attack anonymity, and our protocol can provide user's anonymity.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2219-2221
• /
• 2001

A communication protocol for automatic meter reading is designed for electronic power meter. Communicational functions and data structures are standardized and data reading software is developed according to the developed protocol. The communication protocol is designed with reference specifications, IEC 62056-31 and Distributed Network Protocol(DNP). For design, communicational functions and specifications of the industrial meters were analyzed for the purpose of developing a new one for KEPCO meters. The protocol is designed with 3 layer model, physical layers, data link layer and application layer. A documentation was completed with data gathering, data classification, authentication, error detection. An emulator system was made for testing the protocol. A meter reading software was developed using the protocol. Many different protocols and meter reading softwares are integrated into one with the developed protocol and software as KEPCO's standard.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.321-324
• /
• 2001

The multiple home PC, and home computing environment has undergone a significant evolution. And Internet explosion needs an integrated networking infrastructure within the home. Home networking is a concept that applies to the networking and application technologies to increase the comfort and ensure sharing and management of home resources as well as the provision of new, enhanced services. This paper proposes a Unification Protocol Architecture for home network. This Unification Protocol Architecture expect to a reference model in home network and to a foundation of the IIA (Internet Information Appliance) industry.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.128-130
• /
• 2007

The research degined model which was integrated Cache technical for improvement of modebus protocol. The mode bus it leads and it does not solve in existing to shorten the tank data computing time. It desigine the algorithm which discriminates the shift time of the petrochemistry process tank m following. It is an objective of dissertation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.90-90
• /
• 2000

The FAS protocol of FOUNDATION Fieldbus playes the roles of interface between Data Link Layer and application layer and establishment of connection between receiver and sender. In this study, the FAS protocol of FOUNDATION Fieldbus was developed. The method of implementation is described in this paper. Software of FAS protocol was implemented by Window-based program and DOS-based program for PC and sensor module, respectively.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.10
• /
• pp.669-678
• /
• 2013

Recently, because the portable devices became popular, it is easily to see that each person carries more than just one portable device and the use of the smartphone stretches as time goes by. After the smartphone has propagated rapidly, the total usage of the smartphone applications has also increased. But still, each application store has a different platform to develop and to apply an application. The application store is divided into two big markets, the Android and the Apple. So the developers have to develop their application by using these two different platforms. Developing into two different platforms almost makes a double development cost. And for the other platforms, the weakness is, which still have a small market breadth like Bada is not about the cost, but about drawing the proper developers for the given platform application development. The web application is rising up as the solution to solve these problems, reducing the cost and time in developing applications for every platform. For web applications don't need to make a vassal relationship with application markets platform. Which makes it possible for an application to operate properly in every portable devices and reduces the time and cost in developing. Therefore, all of the application markets could be united into one big market through a protocol which will connect each web applications market. But, still there is no standard for the web application store and no current web application store is possible to interlock with other web application stores. In this paper, we are trying to suggest a protocol by developing a prototype and prove that this protocol can supplement the current weakness.

• Journal of Korea Multimedia Society
• /
• v.19 no.12
• /
• pp.1981-1991
• /
• 2016

In recent, the advancement of wearable devices and wireless body area networking technologies motivate researchers to pay attention to remote healthcare system for monitoring patients health and disease progression effectively. However, in order to implement a practical remote healthcare system, we must consider the security and privacy of patient's personal health information transmitted to healthcare servers through the network. Hence, in this paper, we propose a secure health data transmission protocol in remote healthcare monitoring system to protect patient's health information and prevent privacy from eavesdropping on the network. To achieve our security goals, we design an efficient secure protocol based on the identity-based cryptography with key evolution technique, and then confirm the superiority and the efficiency of the proposed protocol as compared with the existing protocol of Yang et al.

• The Journal of the Korea Contents Association
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2004

In addition to wired communication technology, wireless communication technology has been driving communication revolution nowadays. Bluetooth technology carries out data/voice communication making pico-net and the various application services are supported by access network connected to public network. This paper presents educational software development of bluetooth protocol stack including HCI, L2CAP, RFCOMM, SDP and profiles including GAP, SPP, GEOP, FTP. This software which supports programming environment of these protocol monitoring and emulation is implemented basically step by step for education based on H connected to the bluetooth device through RS-232-C, UART or USB cable. Application program coded by Visual C is operated over the firmware loaded on the bluetooth device connected to the PC. Additionally ftp and chatting function are developed to enhance educational efficiency.