• Explosives and Blasting
• /
• v.37 no.4
• /
• pp.1-9
• /
• 2019

In this study the applicability of a Digital Image Correlation (DIC) method was investigated by measuring the displacement and vibration of rock pillar due to underground mining blasting. When combined with a high speed photography technology, the DIC method provides an excellent photographic image processing ability that can be used to convert the evolving full-field surface properties of structures to 2D or 3D set of coordinate values. The measured coordinate sets are then used to calculate the displacement, strain, and velocity of the target structure. This technique is widely used in science and engineering, and continuously finds its new application areas. In this study, the DIC system and the conventional seismograph were compared for their ability to measure the displacement and vibration produced by blasting. In the field test both methods showed similar results. Thus, it is concluded that the DIC method is feasible to measure the ground displacements and vibrations from blasting.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2894-2909
• /
• 2015

As the number of mobile devices such as smart phones and tablets explodes, the need for new services or applications is also rapidly increasing. Smart class application is one of the emerging applications, in which most of contents are distributed to all members of a class simultaneously. It is highly required to select relay nodes to cover shadow area of radio as well as extend coverage, but existing algorithms in a smart class environment suffer from high control packet overhead and delay for exchanging topology information among all pairs of nodes to select relay nodes. In addition, the relay selection procedure should be repeated in order to adapt to the dynamic topology changes caused by link status changes or device's movement. This paper proposes the learning based relay selection algorithm to overcome aforementioned problems. The key idea is that every node keeps track of its relay quality in a fully distributed manner, where RQI (Relay Quality Indicator) is newly defined to measure both the ability of receiving packets from content source and the ability of successfully relaying them to successors. The RQI of each node is updated whenever it receives or relays broadcast packet, and the node having the higher RQI is selected as a relay node in a distributed and run-time manner. Thus, the proposed algorithm not only removes the overhead for obtaining prior knowledge to select relay nodes, but also provides the adaptability to the dynamic topology changes. The network simulation and experimental results prove that the proposed algorithm provides efficient and reliable content distribution to all members in a smart class as well adaptability against network dynamics.

• Journal of the Korean School Mathematics Society
• /
• v.10 no.4
• /
• pp.471-485
• /
• 2007

In this study, a 27 class hour prescribed program for the fourth grade students is to be developed and applied by extracting the contents associated with basic operations studied prior to the fourth grade level of mixed calculations. After analyzing the results of the research, the following conclusions are obtained. First, the prescribed program for mixed calculations brought about the improvement in the mixed calculation problem solving ability of the students. Second, applying the prescribed program for mixed calculation resulted in an increase in students' interest and concentration on problem solving. In synthesis of the above conclusions, the development and application of the prescribed program for mixed calculation improved the students' concentration on the problem and the students' problem solving ability.

• Mycobiology
• /
• v.48 no.2
• /
• pp.139-147
• /
• 2020

Root-feeding Scarabaeidae, particularly white grubs are considered among the most harmful coleopteran insect pests in turfgrass. In this work, sixteen entomopathogenic fungal species were assayed against flower chafer beetle, Protaetia brevitarsis (Coleoptera: Scarabaeidae) and Metarhizium anisopliae JEF-314 showed high virulence. The control ability of the isolate JEF-314 has been in detail tested for a model insect flower chafer beetle. Further analyses showed insect stage-dependent virulence where the fungal virulence was the highest against smaller instar larvae. Additionally, we confirmed that millet-based solid cultured granule was effective against the soil-dwelling larval stage. The isolate also showed a similar ability for a representative pest (Popillia spp.) in laboratory conditions. Our results clearly suggest a high potential of M. anisopliae JEF-314 to control the flower chafer beetle, possibly resulting in controlling of root-feeding white grubs in turfgrass. Based on the insect life cycle and susceptibility to the fungus, late spring and summer time would be the optimum time to apply JEF-314 granules for an effective control. Further characterization of the efficacy of the fungus under field conditions against the Scarabaeidae beetles might provide an efficient tool to control this beetle in an environment-friendly way.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.4
• /
• pp.79-86
• /
• 2003

The purpose of study is to offer base data for high fluid concrete mix property, as grasp effect of aggregate to reach much more effect for producing high fluid concrete. For this study, there are three types of combined aggregates, river sand + river aggregate(type A), river sand + crusted aggregate(type B), washed sea sand + crushed aggregate(type C) and take a factor, water-contents, water-binder ratio and S/a. And so, we had following conclusion, resulting application-ability of high fluid mortar by K-slump tester to use a handy consistency measuring instrument. And so, we had following conclusion, resulting application-ability of high fluid concrete by K-slump tester to use a handy consistency measuring instrument. 1) In cafe of regular water binder ratio, high fluid concrete suffered much effect of combined aggregates and water binder ratio. Range of water binder ratio by combined aggregates is w/b 0.4 downward(type A and B), w/b 0.35 downward(type C). 2) Water contents to need for producing high fluid concrete is minimum 170kg/$\textrm{m}^3$ without regard to combined aggregates. 3) The effect of S/a on high fluid concrete by combined aggregates is approximately S/a 50% (type A and B), s/a 50-55% (type C). 4) Consistency measuring of high fluid concrete by K-slump tester is possible and first indication value, high fluid concrete can be produced, is 6~10.5cm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1743-1749
• /
• 2015

As smartphones are rapidly supplied, users can easily access video contents anywhere, anytime. So recently, demands for the ability to create one's own mash-up video have been increasing and various video mash-up programs appear to reflect those needs. But, because most existing video mash-up programs can mash up only stored video files, the ability to mash up many videos is limited for smartphones that have restricted memory. In this paper, we have developed a video mash-up application that can easily mash up not only stored videos, but also videos found by chance over the network to make one's own videos.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.175-181
• /
• 2006

Wireless sensor network forms the self-organization network, and transfers the information among sensor nodes that have computing technology ability and wireless communication ability. The recent sensor network is study for low-power, micro, low cost of node is proceeded. Recently, the research of application services in wireless sensor networks is proceeded. Therefore, in this paper, we design the prototype of the real-time information service that support a user the information of temperature, illumination etc. And, we implement the alarm application service fer the disaster prevention on Internet base on IPv4/IPv6. We develop the module of the extract information using the query processing based on TinyOS, and the module of the server's database using MySQL data base management system and JDBC. Additionally, we develop the client module that receive the real-time sensing data using ODBC in Internet based on IPv4/IPv6.

• Journal of Gifted/Talented Education
• /
• v.20 no.3
• /
• pp.847-866
• /
• 2010

Enhancing creativity is possible to offer systematic education programs and several conditions as variable thinking, experiment lesson, opened-situation. We developed CNP model as program for enhancing creativity. The CNP model emphasizes that parts of problem finding, embodying and solving ability and includes scientific problem finding tool, Integrated Process Skills and Science Writing Heuristic. The CNP Model is comprised of six step. We developed teachers' guide and student's worksheets for application. Result of applied CNP model to students of scientifically gifted education center in K University, students were able to enhanced originality and fluency and had solved problems by creative way. And creative problem finding, embodying and solving ability were increased. Therefore, the CNP model was effective in enhancing the creativity of scientifically gifted.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.39-42
• /
• 2019

We report on the design of oil-water separators and the selection of materials for the effective application of highly selective membranes fabricated by commercial PET (polyester) fabrics. The waterproof ability of PET fabrics was optimized to improve the separation selectivity. The density of individual PET fabrics should be over $60g/m^2$, and the multi-layered structure is more favorable for the waterproof ability together with maintaining the removal efficiency. For the continuous adsorption and removal process, the rotating perforated cylinder was selected, and covered with membranes. Furthermore, more improved and stable removal efficiency was obtained by installing floating baffles which forces the oil content to move toward membranes.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.8
• /
• pp.1154-1162
• /
• 2021

The transcriptional capacities of target genes are strongly influenced by promoters, whereas few studies have focused on the development of robust, high-performance and cross-species promoters for wide application in different bacteria. In this work, four novel promoters (P_k.rtufB, P_k.r1, P_k.r2, and P_k.r3) were predicted from Ketogulonicigenium robustum and their inconsistency in the -10 and -35 region nucleotide sequences indicated they were different promoters. Their activities were evaluated by using green fluorescent protein (gfp) as a reporter in different species of bacteria, including K. vulgare SPU B805, Pseudomonas putida KT2440, Paracoccus denitrificans PD1222, Bacillus licheniformis and Raoultella ornithinolytica, due to their importance in metabolic engineering. Our results showed that the four promoters had different activities, with P_k.r1 showing the strongest activity in almost all of the experimental bacteria. By comparison with the commonly used promoters of E. coli (tufB, lac, lacUV5), K. vulgare (Psdh, Psndh) and P. putida KT2440 (JE111411), the four promoters showed significant differences due to only 12.62% nucleotide similarities, and relatively higher ability in regulating target gene expression. Further validation experiments confirmed their ability in initiating the target minCD cassette because of the shape changes under the promoter regulation. The overexpression of sorbose dehydrogenase and cytochrome c551 by P_k.r1 and P_k.r2 resulted in a 22.75% enhancement of 2-KGA yield, indicating their potential for practical application in metabolic engineering. This study demonstrates an example of applying bioinformatics to find new biological components for gene operation and provides four novel promoters with broad suitability, which enriches the usable range of promoters to realize accurate regulation in different genetic backgrounds.