• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.5
• /
• pp.406-415
• /
• 2010

Purpose: The secondary correction of cleft lip nasal deformity still presents a difficult surgical problems. The present study was aimed to investigate the usefulness of Bardach's technique for secondary correction of cleft lip nasal deformity. Materials and Methods: The subjects were eight patients with unilateral and bilateral cleft lip nasal deformity, who had secondary correction by using Bardach's rhinoplasty technique. Age range was from 2 to 21 years and mean age was 10.6 years. There were 3 boys and 5 girls. Six patients had bilateral and two patients had unilateral cleft lip. Facial photographs were taken before and twenty days after the operation. By using Adobe photoshop, the columella height and the nostril width were measured from the facial frontal photograph and Worm's eye view. The degree of improvement was calculated and statistically analyzed. Results: The degree of improvement of the columella length and the nostril width after Bardach's technique was $70.39{\pm}50.14%$ and $-22.93{\pm}0.15%$ respectively. Bardach's technique resulted in projecting the nasal tip, lengthening the columella, medially advancing the alar bases, restructuring the lower lateral cartilages, and changing orientation of the nostrils from horizontal to oblique. The profile view shows projection of the nasal tip, lengthening of the columella, and the change in the nasolabial angle. The scars remained at the philtrum were matter little in compared with improvement of the nasal appearance. Conclusion: These results indicate that Bardach's technique is an useful surgical technique for secondary correction of cleft lip nasal deformity.

• Current Research on Agriculture and Life Sciences
• /
• v.25
• /
• pp.13-18
• /
• 2007

The aim of this research is to set improvement guidance a character analysis of woodland edge to cope with the ecological dysfunction of woodland which was caused by massive development project and thoughtless development in country areas. The summary of research result are as follows. 1) From the result of landscape ecology characteristic analysis of woodland in all seven research sites, to begin with, in proportion of appearance by vegetation layer and condition of composition, site 5 showed to be most satisfactory. 2) A width of woodland edge was revealed 7.5m as a minimum, 17.0m as a maximum, and 11.4m as a average and minimum edge was set as 10m according to integrated analysis on each example place. 3) As a result of flexibility analysis, site 1, 2 and 5 was shown high value 3, and it is thought that curve rather than linearity should be maintained in order to increase the ecological function. Also, a phenomenon of straight was prominent, and as a woodland edge, green network and buffering system showed to be somewhat unsatisfactory. 4) Based on the result of character analysis of landscape ecology, main guidelines for improvement of woodland edge were categorized into five in parallel structure and three in vertical structure respectively. The guidelines for improvement of woodland edge suggested by the research has a deep meaning in that it is used as a basic material to induce for controling more systematically or landscape-friendly the defamed forest problems caused by road construction, various development projects, and enlargement of agricultural lands.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.6
• /
• pp.117-124
• /
• 2017

In this study, we investigated the optimization of process conditions by using the Six Sigma process, design of experiment (DOE) method and response surface method (RSM) to resolve dimensional deviation and appearance problems arising from the shortened process time of the mobile phone rear cover. The analysis of the trivial many was performed by 2-sample T-test and cooling time, and mold temperature and packing pressure were selected as the vital fews affecting the overall width of the product. The optimal conditions of the process were then studied using the DOE and the RSM. We analyzed the improvement effects by applying the selected optimal conditions to the production process and the results showed that the difference between the mean value and target value of the overall width stood at 0.01 mm, an improvement of 88.89% compared to current process that fell within the range of standard dimension. The short-term process capability stood at $4.77{\sigma}$, which implied an excellent technology level despite a decrease by $0.22{\sigma}$ compared to the current process. The difference in process capability decreased by $2.44{\sigma}$ to $0.41{\sigma}$, showing a significant improvement in management capability. Ultimately, the process time of the product was shortened from 18.3 seconds in the current process to 13.65 seconds, resulting in a 34.07% improvement in production yield.

• Journal of Families and Better Life
• /
• v.22 no.5
• /
• pp.59-73
• /
• 2004

Since 1980s' Korea had a great change on the housing culture by the supply of multi-family housing stock both on the macro-social and micro-social aspects. The purpose of this study was to examine the changes and the characteristics of housing environments which were estimated its modernization, and to examine the personal life under the change of housing environments. So I would like to revaluation the characteristics of modernization between the 1980s' and 1990s'. Therefore references were made to various papers, reports, the statistical data, newspaper reports, advertisements and magazines during that period. As a result, this paper came to the remarks as follows: 1. The success of modernization on the housing environments since 1980s' was the Quantitative growth of housing supply by multi-family housing. In spite of this, the Quantitative growth of housing supply and the improvement in Quality like housing space per person had the characters which was 'out of valence on the division'. 2. The Qualitative improvement of modem housing life by the development of housing industries could be said the improvement owing to develop of facilities and equipments. The introduction of up-to-date facilities and equipments realized the convenience and the rationality of living in the house. Although the improvement on the physical things deteriorated the modernized spaces to uniform things by commercial strategies. 3. The life in the multi-family housing which gives protection to personal privacy was settle down on the extremely individualized life without common things within the neighbors. Multi-family housing which was a production of process of modernization came true the growth in an appearance and the variety in the inside, but for the aspect of residents' everyday life in the multi-family housing, the Korean traditional relationship was collapsed and a sense of incompatibility within the residents was created.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.76-83
• /
• 2005

With the acceleration of the miniaturization of products, especially in recent years, machining technologies for these products is in need of improvement. Conventional technologies have limitations in realizing the miniaturization due to the downsizing effects of the tools, which lack sufficient cutting stiffness during machining. The application of ultrasonic vibration is one of the most useful solutions in dealing with the problem. This study focused on the difference of ultrasonic drilling from conventional one in geometrical machining mechanism and the corresponding machining results. In detailed, some mathematical equations for drill cutting edge paths during drilling were extracted and new method to find uncut chip thickness from above equations was suggested. The experiments were carried out through the comparison between the results (disposed chips and internal surface states of holes) of conventional drilling and those of ultrasonic drilling. It was determined that the geometrical paths of cutting edges and analyzed uncut chip thickness agree with the appearance of disposed chips. Furthermore, the change in tool path by ultrasonic vibration resulted in the improvement of surface statement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.95-101
• /
• 2013

Recently, the demand for esthetic improvement by a treatment neither time consuming nor invasive is increasing. The patient wanted the maxillary anterior teeth appearance to be improved by prosthetic treatment, not other treatments such as orthodontic, periodontal, and endodontic treatments, despite the limit of esthetic improvement. In this case, among the recent variety of all ceramic systems for the aesthetic prosthetic restoration, we selected the zirconia-based system as a method of restoration in order to conceal the discoloration of teeth. The patient was satisfied with the esthetic results.

• Design & Manufacturing
• /
• v.2 no.6
• /
• pp.49-55
• /
• 2008

Double-injection molding can inject two different materials or two colors in the same mold and process. If this injection process use, product has ability because the base part maintain strength and specified part can inject soft-material. It makes the cost down by single operation automatically for saving wages. In this paper, we designed double-injection mold for automobile remote control to inject secondary using this part as insert after inject external appearance of product. CAE analysis was progressed gate location and runner size as variable and analysis result is reflected in mold design process. As a result, it could solved badness that is generated at the conventional mold. Additionally, cost is downed by reducing loss of runner as well as could omit painting process because surface of finished product is improved through new mold.

• Journal of Acupuncture Research
• /
• v.23 no.1
• /
• pp.179-186
• /
• 2006

Background : Recently the demand was increasing on the data describing treatment rates and the outcome of Androgenetic Alopecia using Oriental Medicine. Thus this study was designed to observe androgenetic Alopecia treatment using Oriental Medicine including acupuncture and herb because there has been no such statistics. Objectives : Our purpose was determine whether oriental medicine treatment leads to clinical improvement in men with androgenetic alopecia. Methods : Eighty two Men, 17 to 53 years of age, with male pattern hair loss according to a modified Norwood/Hamilton classification scale(II to VI) were enrolled in this study. Patients were treated with multidisciplinary Korean oriental medicine treatment (herbal acupuncture, acupuncture, herb, chuna therapy) at twice a week for 6 months to 12 months. Efficacy was evaluated by patient and investigator assessment, and global photographic review. Results : Oriental medicine treatment improved scalp hair by all evaluation. Patient self assessment demonstrated that Oriental medicine treatment slowed hair loss, increased hair growth, and improvement appearance of hair. These improvements were corroborated by investigator assessments and assessments of photographs. Conclusion : Oriental medicine treatment has significant effects on the androgenetic alopecia. Longer follow up studies are needed to examine whether its effects last long enough for the patients with androgenetic alopecia.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.18 no.2
• /
• pp.33-43
• /
• 2012

This study purposes to present the improvement on the index by analyzing concretely the certification and evaluation index and the actual certification acquisition focusing on the buildings acquiring the barrier-free (BF) certification. So, after analyzing the screening results of the buildings acquiring the BF certification and then grasping the general application level based on the above analysis, this study tries to present the improvement on the BF certification index by analyzing the detailed applications of the BF certification-acquired buildings and then grasping the problems on the evaluation index of the current certification system. It was analyzed that the items which applied the BF construction method generalized to the common buildings through the Act on the Promotion of Convenience in medium facilities and the items with higher distribution points were shown as high in terms of points and the acquired point level of items which influenced by the shape and condition of side and land to defile the appearance of buildings were low.

• Management & Information Systems Review
• /
• v.18
• /
• pp.91-113
• /
• 2006

Most merchant of traditional markets think that the condition of market management is getting worse because of decreasing customers caused appearance of large retail stores such as discount store and changing of consumer's life style. Therefore special law was legislated for the activation of traditional markets in 2005. This special law include important articles about surroundings improvement, business management modernization and redevelopment of traditional markets. According to the small and medium business administration data, korea government furnished 177billion and 11billion(won) separately for the facilities and management modernization of traditional markets. Traditional markets of whole country planned and practiced modernization of facilities and management of traditional markets. And most of traditional markets interested in a large project such as establishment of arcade and car parking, remodelling of building, pavement of passageway etc. By the way, under the long term viewpoint, a large project presented above are not the best solution for the traditional markets because of its effectiveness. Maybe, for example, improvement of store signboard and display stand is more effective for the long time. As the problem of management modernization, yet a credit transactions. is the most important factor, only four markets have a plan for the credit transactions. And above all, we must realize that activation of traditional markets can be accomplished by merchant's own initiative participation.