• 조명전기설비학회논문지
• /
• 제29권3호
• /
• pp.88-95
• /
• 2015

The accelerated thermal aging of CSPE(Chloro Sulfonate Polyethylene) was carried out for 40.41, 121.22, 202.04 days, 16.82, 50.45, 84.09 days and 7.32, 21.96, 36.59 days at 100, 110, and $120^{\circ}C$, respectively, which are equivalent to 20, 60, 100 years of aging at $50^{\circ}C$. The permittivities and the apparent densities of the accelerated thermally aged CSPE samples are increased with accelerated thermal aging year but EAB(Elongation at Break) is decreased with that. The dielectric strength and the electric breakdown of the non-accelerated and accelerated thermally aged CSPE samples do not depend on accelerated thermal aging year and applied voltage rising time. density and EAB measures.

• 한국세라믹학회지
• /
• 제21권1호
• /
• pp.19-26
• /
• 1984

This study has exemined on the effect for the fitting in porcelain body of $MgO-SiO_2$ system. The mixture was made of corresponding in the theoretical composition of enstatite with Kyul Sung talc and sea water magnesia cake. Hyup Jin kaolin as clay minerals to give the mixtue plasticity was added 10% by weight of the mixture. Also feldspar was added 5% by weight of the above mixture. We added limestone in various kinds of 1%-20% by weight of mixture included kaoil and feldspar in order last of all. The mixture was fire at the various temperatures from 12$25^{\circ}C$ to 13$25^{\circ}C$. After we examined closely physcial properties and microstructures we achieved the following results. 1) 5% addition amount of limestone was good for the property of the strength at the full firing temperatures. But 10% and 15% additions were remarkably excellant below 1275$^{\circ}C$ 2)When we considered the apparent bulk density 5% addition was good for the full firing temperature. 3) 5% addition amount of limestone was proved to be the most excellant propeties between 130$0^{\circ}C$ and 13$25^{\circ}C$ when we considered the apparent bulk density and the range of the firing temperature.

• 한국의류학회지
• /
• 제38권3호
• /
• pp.397-403
• /
• 2014

In this study, various types of Jumchi Hanji were made to develop shroud materials as a new use for Hanji. The properties of Hanji (basis weight, thickness, apparent density, bulk, tensile strength, wet tensile strength, elongation ratio, tear strength, bursting strength, and folding endurance) are measured. In all cases, Jumchi Hanji had a higher thickness, lower apparent density and higher bulk than Hanji because pores in the intervals of mulberry fiber are composed of bulk. So, it is considered to carry a value as a textile material. As for the results of the strength analysis of Jumchi Hanji, Jumchi technique enhances 25% of elongation ratio, which is regarded the most important role in textiles and 35% of bulk. Moreover, it was shown that it enhanced overall strength. In conclusion, it implies the possibility of applying it as a shroud material. Jumchi Hanji is thought to have enough potential to be developed as a material to carry the characteristics of Hanji in the textile market.

• 한국재료학회지
• /
• 제5권8호
• /
• pp.921-928
• /
• 1995

MoSi$_2$heating elements were fabricated using MoSi$_2$, powder prepared by SHS. Their apparent density, electrical resistivity, bending strength and victors hardness were measured as a function of sintering temperature, time and the amount of ceramic additives. The additives were A1$_2$O$_3$, SiO$_2$and bentonite which were added as a plastisizer. The electrical resistivity of MoSi$_2$decreased with the increase in the apparent density as expected. It decreased when the additives were added and the increase was the largest for the case of SiO$_2$. The bending strength and hardness decreased when the grain size becomes larger which is opposite to the expectation from the Hall-Petch type relation. Instead, they showed inverse proportionality with the volume fraction of pores probably in an exponential manner. The strength and hardness also decreased with the additives.

• 한국세라믹학회지
• /
• 제32권7호
• /
• pp.769-776
• /
• 1995

Infrared radiators of a cordierite system [cordierite (2MgO.2Al2O3.5SiO2)＋30wt% clay＋X wt% MnO2 (X=0, 0.1, 0.25, 0.5, 1.0, 1.5, 2.0, 2.5)] were manufactured by a slurry casting method. Thermal and physical properties of these infrared radiators were studied by the measurement of spectra emissivity, thermal expansion coefficient and apparent density, SEM and EPMA analyses were also carried out. The thermal expansion coefficient and apparent density were decreased with increasing amouonts of MnO2 additives. On the other hand, the spectral emissivity was increased in the wavelength below 4.5${\mu}{\textrm}{m}$. Also, infrared radiators of the cordierite system, of which the spectral emisivity was 0.8, could be attainable in the wavelength above 4.5${\mu}{\textrm}{m}$. The infrared radiator of the cordierite system with 2.0wt% MnO2, of which the spectral emissivity was approximately 1.0, could be attainable in the wavelength between 4.5${\mu}{\textrm}{m}$ and 8${\mu}{\textrm}{m}$. The spectral emissivity of the specimen containing 2.0wt% MnO2 was higher than others in the wavelength between 8${\mu}{\textrm}{m}$ and 14${\mu}{\textrm}{m}$.

• 한국세라믹학회지
• /
• 제20권4호
• /
• pp.347-355
• /
• 1983

A batch mixture was prepared as 16mol% CaO-84mol% $ZrO_2$ of regeant-grade powder. The monoclinic Zirconia powder had an average particle size of $9.24 \mu\textrm{m}$ and calcium carbonate powder had a reported purity of 99.7 weight percent and mean particle size of TEX>$24, 37<\mu\textrm{m}$. The specimens were fired at 1400, 1500, 1650 and $1750^{\circ}C$ for 0. 3, 5 and 7 hours respectively. After fired the specimens were investigated using Scaning electron microscopy. Density Porosity Compressive strength Modulus of rupture and Thermal expansion were measured X-ray diffration analysis was also carried out. The results are as follows ; 1) As the firing temperature or soaking time was increased firing linear shrinkage apparent density compressive strength and modulus of rupture increased but apparent porosity decreased, 2) Cubic and monoclinic Zirconia was found at $1400^{\circ}C$ and cubic Ziconia found above $1500^{\circ}C$ 3) The specimens fired at 140$0^{\circ}C$ without soaking display thermal expansion curves by monoclinic〓tetragonal transformation and no tranformation was found at $1400^{\circ}C$ for 5hrs and above $1500^{\circ}C$. 4) The lattice parameter had constant value of 5.1345 $\AA$ through all the ranges of firing temperature 5) The higher the firing temperature was or the longer the soaking time was the larger the grain size was.

• 한국재료학회지
• /
• 제22권12호
• /
• pp.701-705
• /
• 2012

The effects of clay, aluminum hydroxide, and carbon powder on the sintering of a Si/SiC mixture from photovoltaic silicon-wafer production were investigated. Sintering temperature was fixed at $1,350^{\circ}C$ and the sintered bodies were characterized by SEM and XRD to analyze the microstructure and to measure the apparent porosity, absorptivity, and apparent density. The XRD peak intensity of SiC in the sintered body was increased by adding 5% carbon to the Si/SiC mixture. From this result, it is confirmed that Si in the Si/SiC mixture had reacted with the added carbon. Addition of aluminum hydroxide decreased the cristobalite phase and increased the stable mullite phase. The measurement of the physical properties indicates that adding carbon to the Si/SiC mixture enables us to obtain a dense sintered body that has high apparent density and low absorptivity. The sintered body produced from the Si/SiC mixture with aluminum hydroxide and carbon powder as sintering additives can be applied to diesel particulate filters or to heat storage materials, etc., since it possesses high thermal conductivity, and anticorrosion and antioxidation properties.

• 한국수산과학회지
• /
• 제43권4호
• /
• pp.325-330
• /
• 2010

The apparent digestibility coefficients of dry matter, crude protein and energy in white fishmeal, herring meal, anchovy meal, salmon meal, sardine meal, mackerel meal, squid meal, soybean meal, corn gluten meal and wheat flour were determined for olive flounder. Digestibility coefficients were determined using a reference diet and test diets that contained 70% of the reference diet mixture and 30% test ingredients. All diets contained 0.5% chromic oxide as a digestibility indicator. The fish averaging 220 g were held in 500 L tanks at a density of 20 fish per tank. Feces were collected from three replicated groups of fish using a fecal collection column attached to a fish-rearing tank. The apparent dry matter, crude protein and energy digestibility coefficient values observed were in the ranges 29-79%, 59-95% and 45-91%, respectively, for various test ingredients. The apparent dry matter, crude protein and energy digestibility of white fishmeal, herring meal, anchovy meal, salmon meal, sardine meal, mackerel meal and squid meal were significantly higher than those of soybean meal, corn gluten meal and wheat flour.

• 자원리싸이클링
• /
• 제9권2호
• /
• pp.40-45
• /
• 2000

석탄회를 출발물질로 사용하고 봉사 및 유리를 첨가하여 저밀도 세라믹 담체를 제조하였다. 또한 성형체의 초기 기공율을 높이기 위하여 밀가루를 30wt% 첨가하였다. 봉사를 첨가함에 따라 겉보기 밀도 및 벌크 밀도가 낮아졌고, 석탄회에 대하여 15wt%의 붕사를 첨가한 결과 $1160^{\circ}C$에서 15분 소결하여 벌크 밀도 $0.79g/\textrm{cm}^3$, 겉보기 밀도 $1.10g/\textrm{cm}^3$인 담체를 얻을 수 있었다. 판유리를 분쇄한 후 212 이하로 체가름한 유리 분말을 첨가하면 붕사와 마찬가지로 밀도가 낮아졌으며, 12wt% 첨가하여 $1280^{\circ}C$에서 10분간 소결한 결과 벌크 밀도 $0.90g/\textrm{cm}^3$, 겉보기 밀도 $1.00g/\textrm{cm}^3$를 얻을 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.635-642
• /
• 2014

The space charge behaviors of oil-paper insulation affect the stability and security of oil-filled converter transformers of traditional and new energies. This paper presents the results of the electrical aging of oil-impregnated paper under AC-DC combined voltages by the pulsed electro-acoustic technique. Data mining and feature extractions were performed on the influence of electrical aging on charge dynamics based on the experiment results in the first stage. Characteristic parameters such as total charge injection and apparent charge mobility were calculated. The influences of electrical aging on the trap energy distribution of an oil-paper insulation system were analyzed and discussed. Longer electrical aging time would increase the depth and energy density of charge trap, which decelerates the apparent charge mobility and increases the probability of hot electron formation. This mechanism would accelerate damage to the cellulose and the formation of discharge channels, enhance the acceleration of the electric field distortion, and shorten insulation lifetime under AC-DC combined voltages.