• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.1
• /
• pp.50-54
• /
• 2012

According to Luhr's classification, a fracture in the mandible with a width of less than 15-20 mm is considered to be an atrophic mandibular fracture and its incidence is very rare. Because of the reduced cross-sectional area and smaller contact area of the fractured ends as well as the poorly vascularized bony structure and delayed bone healing, an atrophic mandibular fracture is a great challenge for oral and maxillofacial surgeons. Surgeons tend to perform closed reduction, because open reduction is considered a non-life-saving surgery among elderly patients. Thus, most of them have limited experience in surgical management. According to recent reports, open reduction yields a good result, and the Association for Osteosynthesis (AO) group has recommended open reduction. This is a case report of our two experiences of open reduction and rigid fixation of atrophic mandibular fractures by the AO principle. Articles were also reviewed here.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.132.2-132.2
• /
• 2011

We are developing Adaptive Optics (AO) system for astronomical use. The He-Ne laser works as an artificial light source. The tip-tilt correction servo is added to our AO system. The tip-tilt term, among the Zernike terms, is the biggest contributor of wavefront deformation caused by atmospheric turbulence at small telescopes. The tip-tilt correction servo consists of a Piezo tip-tilt platform with a mirror, a quadrant photodiode as a tip-tilt sensor, and controllers. The Shack-Hartmann wavefront sensor measures the residual wavefront errors and they are corrected by the MEMS (Micro Electro Mechanical System) deformable mirror. The MEMS deformable mirror allows the compact size at low cost compare to adaptive secondary mirror and other deformable mirrors. As the frame rates of the MEMS deformable mirror is about tens of kHz, the frame rates of the detector in wavefront sensor is the bottleneck of the wavefront correction speed. For faster performance, we replaced a CCD which provides frame rates only 70 Hz with a CMOS with frame rates up to 450 Hz.

• Journal of Biosystems Engineering
• /
• v.37 no.1
• /
• pp.1-10
• /
• 2012

Purpose: The most important element of an agricultural helicopter is the rotor blade realizing lift force. In order to improve the performance of the rotor blades, two types (KA152313 and KB203611) of airfoils were designed and compared. Methods: The nose shape of the KB203611 airfoil was 'drooped' and 'sharp' compared to the leading edge of the KA152313 airfoil. The performance of the experimental airfoils was simulated using CFD-ACE program, and lifts were measured in situ using the 'AgroHeli-4G', a prototype helicopter. Results: Simulated lifts of the blade with the KA152313 airfoil showed proper values for a wide range of angles of attack between $14^{\circ}{\sim}18^{\circ}$, while the simulated lift of the KB203611 blade exhibited maximum values near $13^{\circ}{\sim}14^{\circ}$. In the lift measurements, the range of operable angles of attack was a collective pitch angle at the grip (GP) of $12^{\circ}{\sim}18^{\circ}$ for the KA152313 blade. On the other hand, the range of angles of attack for the KB203611 blade was a GP of $12^{\circ}{\sim}14^{\circ}$. Conclusions: The blade of KA152313 performed well over a wide range of AoAs and the blade of KB203611 performed better at low AoAs. In this study, a variative airfoil blade, gradually emerging from grip to tip using the two different airfoils, was suggested.

• Korean Journal of Veterinary Research
• /
• v.50 no.1
• /
• pp.49-53
• /
• 2010

A 5-year-old female Cocker spaniel dog (body weight 7.0 kg) was presented with primary complaints of exercise intolerance and loud precordial thrill which was noticed since she was a puppy. Physical examination revealed a grade V/VI continuous murmur over the maximal point of the left basal area, bounding femoral pulse, but no differential cyanosis. Tall R waves were detected in electrocardiogram, suggesting left ventricular enlargement. Diagnostic imaging studies showed enlarged left ventricle, bulged descending aorta (dAo), markedly dilated right pulmonary artery, and continuous shunt flow between the dAo and main pulmonary artery. Based on these findings, the dog was diagnosed as left to right shunted patent ductus arteriosus (PDA). The patent ductus arteriosus was treated by lodging a PDA duct occluder via the transvenous approach. Clinical signs were markedly improved after the ductal occlusion, the shunt flow was mildly persistent. The case presented is the first case of PDA occluded by the PDA duct occluder via the transvenous approach in a small breed of dog. Although the residual shunt flow was mildly persisted, the dog was clinically normal without detectable murmurs.

• Korean Journal of Poultry Science
• /
• v.32 no.4
• /
• pp.275-279
• /
• 2005

This study investigated the effect of dried food-waste diets (FW) fermented by Aspergillus oryzae (AEW), on egg Production and egg qualify in laying hens. One hundred sixty eight laying hens, 50 week old, ISA-Brown wtrain were randomly distributed into 7 treatments with 3 relpicates of 8 birds per replicate and fed with standards laying hen diet replaced with FW and AFW at die=rent level Basal Diet, 25, 10, $75\%$, respectively. There was a significant decrease in feed intake for FW $50\%$ diet and egg Production was statistically lower in all W diet treatments(p<0.05). Water consumption was increased as the replacement increased. Egg weight, egg shell thickness and strength were similar among treatments. However, egg yolk color and Haugh unit showed distinct differences when W were added to their diets(p<0.05). No difference was observed in egg yolk cholesterol. It seems that FW diet could decrease the egg Production, but would be able to improve egg Quality. From this results, AO seemed applicable to laying hen diet as supplements.

• ETRI Journal
• /
• v.39 no.2
• /
• pp.234-244
• /
• 2017

Research interest in three-dimensional multiple-input multiple-output (3D-MIMO) beamforming has rapidly increased on account of its potential to support high data rates through an array of strategies, including sector or user-specific elevation beamforming and cell-splitting. To evaluate the full performance benefits of 3D and full-dimensional (FD) MIMO beamforming, the 3D character of the real MIMO channel must be modeled with consideration of both the azimuth and elevation domain. Most existing works on the 2D spatial channel model (2D-SCM) assume a wide range for the distribution of elevation angles of departure (eAoDs), which is not practical according to field measurements. In this paper, an optimal FD-MIMO planar array configuration is presented for different practical channel conditions by restricting the eAoDs to a finite range. Using a dynamic network level simulator that employs a complete 3D SCM, we analyze the relationship between the angular spread and sum throughput. In addition, we present an analysis on the optimal antenna configurations for the channels under consideration.

• Current Optics and Photonics
• /
• v.2 no.6
• /
• pp.612-622
• /
• 2018

In wave-front-sensor-less adaptive optics (WFS-less AO) systems, the Jacopo Antonello (JA) method belongs to the model-based class and requires few iterations to achieve acceptable distortion correction. However, this method needs a lot of measurements, especially when it deals with moderate or severe aberration, which is undesired in free-space optical communication (FSOC). On the contrary, the stochastic parallel gradient descent (SPGD) algorithm only requires three time measurements in each iteration, and is widely applied in WFS-less AO systems, even though plenty of iterations are necessary. For better and faster compensation, we propose a WFS-less hybrid approach, borrowing from the JA method to compensate for low-order wave front and from the SPGD algorithm to compensate for residual low-order wave front and high-order wave front. The correction results for this proposed method are provided by simulations to show its superior performance, through comparison of both the Strehl ratio and the convergence speed of the WFS-less hybrid approach to those of the JA method and SPGD algorithm.

• Clinics in Shoulder and Elbow
• /
• v.16 no.1
• /
• pp.33-39
• /
• 2013

Purpose: The aim of this study is to evaluate the clinical result of intra-articular fractures of the distal humerus (AO type C) in elderly osteoporotic patients treated with double tension band osteosynthesis. Materials and Methods: From January 2006 to December 2010, 10 elderly osteoporotic patients(1 male, 9 females) with intra-articular fractures of the distal humerus (AO type C) were treated with double tension band osteosynthesis. The mean age of patients at the time of surgery was 74.6(66~84) years and the mean follow-up period was 39.2(20~74) months. The fracture union and complications were assessed and the functional result was evaluated by the rating system of Jupiter et al. and the Mayo elbow performance index. Results: Bone union was achieved in all patients with no secondary displacement. The mean time for union was 16.6(13~22) weeks. The average postoperative arc of elbow flexion was 119(100~140) degrees with a mean flexion contracture of 8.5(0~15) degrees. The recovery in two patients was rated as excellent, in 7 as good, and in 1 as fair in terms of the Mayo elbow performance index with average value of 82(70~90) points. Seven patients were rated as excellent, 1 as good, and 2 as fair in terms of the rating system of Jupiter et al. Changing tension band wiring was performed in one patient as skin irritation was noticed due to tension band knots. Heterotopic ossification developed in one patient but had no symptom. Conclusion: Double tension band osteosynthesis in intra-articular fractures of distal humerus (AO type C) in elderly osteoporotic patients can provide sufficient and secure stability to allow early rehabilitation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.4
• /
• pp.307-318
• /
• 2005

This study was conducted to examine effects of brewery meal-based fermented feedstuff supplemented with Aspergillus oryzae(AO) or Saccharomyces cerevisiae(SC) on luminal micro-organism of Korean native cattle. Two cows equipped with luminal cannulas were used as experimental animals. Experiment was done with three treatment groups: $71.5\%$ of commercial feed and $28.5\%$ of com silage(control): $45.0\%$ of commercial feed, $26.5\%$ of fermented feedstuff supplemented with AO and $28.5\%$ of corn silage(TAO): $45.0\%$ of commercial feed, $26.5\%$ of fermented ffedstuff supplemented with SC and $28.5\%$ of corn silage(TSC). The number of total viable bacteria (p<0.05), anaerobic fungi and protozoa(p<0.05) was higher in TAO and TSC than in control. The number of proteolytic bacteria(p<0.05), cellulolytic bacteria and xylan fermenters tended to be higher in TAO and TSC than in control. The dry matter recovery (DMR) of protozoa was higher in TAO and TSC than in control(p<0.05). The crude protein (CP) content of total microbes and protozoa was higher in TSC than in control and TAO (p<0.05). The CP content of bacteria was higher in TAO and TSC than in control(p<0.05). The ether extract(EE) content of the total microbes was higher in TAO than in control and TSC(p<0.05), and the EE of protozoa and bacteria were higher in TSC than in control and TAO(p<0.05). The ratio of essential amino acids of total microbe was higher in control than in TAO and TSC(p<0.05). The ratio of methionine and alanine of bacteria was higher in TAO and TSC than in control(p<0.05). The results suggested that the feeding of fermented feedstuff supplemented with AO or SC had an influence on the numbers of ruminal microorganism and the changes of microbial body composition.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.6
• /
• pp.9-16
• /
• 2010

The SFRJ(Solid Fuel Ram-Jet) propulsion is attractive for projectiles because of the combination of high propulsive performance and low system complexity more than conventional projectiles. The Objective of this research was to characterize the inlet aerodynamic characteristics (center-body & pitot type) in SFRJ. Diffuser static pressure & combustion chamber pressure was tested and the AoA was changed $0^{\circ}$ and $4^{\circ}$ at Mach number of 3.0 for performance estimate. The performance study of inlet was carried out with the Schlieren system and Supersonic cold-flow system. Under mach 3.0, the center-body showed twice higher total pressure recovering ratio than the pitot type. A Computational fluid dynamic solution is applied internal flow of inlet and the solutions are compared with experimental results.