• 제목/요약/키워드: Anti-wearing

검색결과 42건 처리시간 0.021초

Sub-micrometer 크기의 패턴의 복제시 발생되는 이형 특성의 분석 (Analysis of anti-adhesion property in replication of patterns of sub-micrometers)

  • 이남석;강신일
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.940-944
    • /
    • 2003
  • With the increasing demand for plastic micro components, micro-/nano-molding using the mother stamper has received much attention. If the replication temperature is too high, the adhesion between the stamper and the polymer melt may deteriorate the surface quality of the replicated part, excessively wearing down the stamper. In this paper, an experimental method analyzes the temperature dependency of the anti-adhesion property between the actual stamper with patterns of sub-micrometer and the polymer melt. As a practical example, a correlation between the contact angle of the stamper and the surface quality of the molded substrates as a function of the replication temperature, respectively, was obtained quantitatively.

  • PDF

진동모드에 따른 각종 장갑의 방진효과 분석 (An Analysis of Vibration Attenuation Effect of the different type of Gloves and Drilling Mode)

  • 황성환;이형일;이동충
    • 산업경영시스템학회지
    • /
    • 제24권69호
    • /
    • pp.65-73
    • /
    • 2001
  • The objective of this study is to evaluate the vibration attenuation effects of the different type of gloves and drilling mode while operating a light-weighted powered hand drill. For the experimental design, five different kinds of glove(barehanded cotton partly coated anti-vibration, and open-finger vibration glove) two types of push force level(100N and 200N) and two types of drilling mode(impact and non-impulsive) were considered. Six healthy male subjects were employed to drive screws into a vertically mounted marble plate with a powered hand drill in a randomly ordered experimental conditions. The findings of this study are summarized as follows; (1) It was found that the best combination of overall BMS transmissibility was using impact drilling mode with anti-vibration glove among evaluated experimental conditions (2) The wearing open finger vibration glove in mid-frequency level and anti-vibration glove with impact drill in high-frequency were the best in the result from mean corrected transmissibility equation of ISO 10819.

  • PDF

레보도파 약효 지연 현상 및 약효 감소 현상으로 인한 자세불안정 및 전신탈력감을 호소하는 특발성 파킨슨병 환자에 대한 보뇌식풍지경탕 치험 1례 (Treating Idiopathic Parkinson's Disease with Bonoesikpungjigyeong-tang: A Case Study on "Delayed On" and "Wearing Off" Phenomena after Long-term Levodopa Intake)

  • 성시윤;이다빈;허성은;홍성희;황예채;김경묵;이한결;문상관;정우상;권승원
    • 대한한방내과학회지
    • /
    • 제45권2호
    • /
    • pp.219-233
    • /
    • 2024
  • A 69-year-old female diagnosed with idiopathic Parkinson's disease and treated with anti-Parkinsonian medications, including levodopa, for 7 years presented with complaints of wearing-off phenomenon and delayed onset of medication efficacy, resulting in postural instability and feeling of severe exhaustion. The patient underwent a 50-day course of treatment with Bonoesikpungjigyeong-tang formula. The effects of the treatment were evaluated by recording the average time to onset of medication efficacy, the average time to medication wearing-off, and discomfort due to wearing-off phenomenon. Postural instability was assessed using the Numeric Rating Scale (NRS). The patient's overall quality of life was assessed using the EQ-5D-3L. After 50 days of treatment, the average time to onset of medication efficacy decreased, and the average time to medication wearing-off increased. Discomfort due to wearing-off phenomenon and postural instability decreased. This case suggests that Bonoesikpungjigyeong-tang might be an alternative for improving discomfort caused by long-term levodopa intake.

HMD 착용 중의 충돌 사고 방지를 위한 알리미 모듈 설계 (Reminder module design to prevent collision accidents while wearing HMD)

  • 이민혜;조승표;신성윤;이홍로
    • 한국정보통신학회논문지
    • /
    • 제26권11호
    • /
    • pp.1653-1659
    • /
    • 2022
  • 가상현실 콘텐츠는 HMD기기를 이용하여 사용자에게 높은 몰입감을 제공한다. 그러나 HMD기기의 착용 중에는 사용자의 위치나 장애물과의 거리를 파악하기 어렵기 때문에 물리적 충돌로 인해 상처를 입는 경우가 발생한다. 본 논문에서는 HMD기기의 착용 중에 장애물과의 충돌 위험을 알려 사고를 방지하는 알리미 모듈을 제안한다. 제안하는 모듈은 가속도·자이로 센서로 사용자의 상태를 입력받아 충돌 사고 가능성이 있는 동작을 판별한다. 충돌 예상 범위에 장애물이 있다면 사용자에게 부저로 경고음을 출력한다. 실험 결과, HMD 착용 상태에서 장애물 감지 정확도가 1단계에서 86.6%, 2단계 상황에서 83.3%로 도출되어 사고 방지 알리미의 성능을 확인할 수 있었다.

Protective role of Ginseng in endomertriosis during covid-19

  • JiHyeon Song;YoungJoo Lee
    • Journal of Ginseng Research
    • /
    • 제47권2호
    • /
    • pp.169-172
    • /
    • 2023
  • The coronavirus disease 2019 (COVID) pandemic began in December 2019. Many countries have implemented restrictions such as mandatory mask wearing and social distancing. These measures have caused diverse and complex health problems, particularly in women's health, anxiety, and depression. This review examines an alternative approach to the treatment of endometriosis during the COVID pandemic. The efficacy of ginseng with anti-inflammatory activity and ability to relieve or prevent symptoms of endometriosis is discussed and reviewed.

Antioxidant and Antibacterial Effects of Mixed Extracts of Phyllanthus emblica, Geranium (Pelargonium graveolens) and Commiphora myrrha: Possibility of Natural Materials for Acne Treatment

  • Mi Jeong Choi;Yu Ri Kim
    • 한국미생물·생명공학회지
    • /
    • 제51권2호
    • /
    • pp.174-183
    • /
    • 2023
  • Various skin diseases are occurring due to external factors such as urbanization and increase in environmental pollution and wearing masks due to COVID-19. Accordingly, various functional cosmetics are being released, but as some side effects are reported, research on functional cosmetics materials using natural plants is necessary. Therefore, in this study, the antioxidant, antibacterial and anti-inflammatory effects of Phyllanthus emblica, Geranium (Pelargonium graveolens), and Commiphora myrrha mixed extracts (PGC) that pharmacological efficacy has been verified were analyzed and their potential as functional cosmetics raw materials was examined. Four extracts (PGC-1~4) were prepared according to the extraction method. ABTS and DPPH radical scavenging activity experiments were conducted for the antioxidant efficacy of the extracts. In addition, paper disc experiments and LPS inflammation-inducing cytokine experiments were conducted to examine the antibacterial and anti-inflammatory effects. In addition, a cell viability test was performed to confirm cytotoxicity. As results of the study, all extracts showed antioxidant, antibacterial, and anti-inflammatory effects without cytotoxicity, and in particular, PGC-4, a fermentation and ultrasonic extract, showed the best efficacy. This means that the extraction yield of useful components varies depending on the extraction method.

항노화 패션을 위한 여성 요실금 팬티 연구 (A Study of Women's Incontinence Panties with Anti-aging Effect)

  • 구미란
    • 한국의상디자인학회지
    • /
    • 제18권1호
    • /
    • pp.51-60
    • /
    • 2016
  • This study aims to contribute to development of women's incontinence panties with anti-aging effect meeting customers' requirements by examining types, sorts, sizes and specifications of women's incontinence panties currently sold in the market. The results of analysis of a total of 22 commercial products are as follows. 1. Among the samples, 21 incontinence panties were slip on type like regular underwear; only 1 was pad insertion type. With respect to the length of side seam, 17 (77.3%) incontinence panties were above 14 cm which is classified as maxi; the rest of them (5, 22.7%) were 7~11 cm which is classified as middy. 2. With respect to size, the percentage of Size 3 was 40.9% showing the largest, followed by Size 4 (31.8%), Size 2 (18.2%), Size 5 (9.1%). To produce the incontinence panties considering various ages and body shapes, it is recommended to select above Size 4 as a minimum. 3. With respect to materials of the incontinence panties, natural fibers such as cotton or rayon were mostly used and a polyurethane, nylon or polyester was mixed to enhance the wearing sensation and stretchability of the panties. Finally, for structure of the crotch area, single knit was the largest (9, 40.9%), terry weave 7 (31.8%), sofe pile weave 4 (18.2%), and waffle weave or diamond weave 2.

  • PDF

영화 의상을 통해 본 블루머 의상(bloomer costume)에 관한 고찰­영화"오스카와 루신다(OSCAR and LUCINDA)"를 중심으로­ (A Study on the bloomer costume on the movie costume­Focusing on "OSCAR and LUCINDA"­)

  • 곽미영
    • 한국의상디자인학회지
    • /
    • 제2권1호
    • /
    • pp.133-145
    • /
    • 2000
  • Costume in movies are used as an instrument to signify the personality image and status of characters, and even the main theme of movie itself. The purpose of this paper is to verify the feministic meaning of bloomer costume used in movie, 「OSCAR and LUCINDA」. The bloomer costume was anti-fashion in crinoline period, when women was normally not allowed to put on trousers. To achieve the purpose, I used content analysis to obtain meanings from existing literature and video tapes(including, slides and pictures). Bloomer costume, introduced by Mrs. Amelia Bloomer at 1850s, is an anti­fashion to express women's right to wear trousers that were exclusively used by men since the medieval age. In this sense, bloomer costume itself is a costume expressing values of women's emancipation movement. In 「OSCAR and LUCINDA」, heroine, Lucinda, with bloomer costume is described as a woman who has strong motivation toward work, who actively looks for a man she loves, and who has free­will to involve herself in what she wants, even gambling. This is not surprising in a sense that Lucinda's bloomer costumes itself signifies the meanings of feminism. I found that bloomer costume was well described in the movie from the historical point of view. But some details, including type of trousers, were expressed without strict historical evidence. Overall, it is certain that 「OSCAR and LUCINDA」, with a heroine wearing bloomer costume was a big step towards women's emancipation in movies.

  • PDF

철강-현무암 복합재료 파이프의 역학적 거동에 관한 연구 (A Study on the Mechanical Behaviour of Steel-basalt Composite Pipe)

  • 김종도;왕지석;윤희종
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제31권4호
    • /
    • pp.401-409
    • /
    • 2007
  • Because of the various excellent characteristics of cast basalt materials. such as, anti-corrosion, anti-wearing, good hardness. high chemical stability, of which steel may not possess, the steel-basalt composite pipes are used in severe environments for compensating the defects of steel. However. without sufficient mechanical investigation prior to application. the basalt liners in steel-basalt composite pipes may be cracked and broken or the basalt liners are omitted from steel pipes in applications. In these cases, the merits of basalt materials may disappear and the basalt liners may not play their good roles as expected. Therefore, it is required that mechanical behavior of steel-basalt composite pipes and surrounding environments be fully examined before installation. The limit of bending moment with which steel-basalt composite pipe may safely endure is calculated and the limit curvature of the composite pipe in the safe range is presented in this paper. The temperature distributions and the thermal stresses are also computed and the limit difference of temperatures between inner and outer side of composite pipe is given together.

폐자기를 사용한 마그네시아 인산염 세라믹(MPC) 인조석재의 내마모특성 (Abrasion Resistance Property of the Magnesia Phosphate Ceramics(MPC) Artificial Stone Using the Waste Porcelain)

  • 유용진;이상수;송하영
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2014년도 추계 학술논문 발표대회
    • /
    • pp.51-52
    • /
    • 2014
  • Recently, it is the global warming phenomenon because of the greenhouse gas exhaustion caused by and the environment problem is serious. And it is the situation where the problem of the exhaustion of resource because of the indiscriminate picking of the that is the raw material of the cement, limestone and natural aggregate are emphasized. In addition, thus the cement reduction amount of use and substitute material research is the urgent actual condition with the gas emission, which here it is generated in conducting compression molding in the building stone manufacturing process performance degradation phenomenon and fire resistance, and problem of the durability. Therefore, in this research, because of being the magnesia phosphate ceramics, the waste porcelain is applied and the anti-wearing character of the artificial stone according to it tries to be investigated.

  • PDF