• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.96-101
• /
• 2000

Comparative studies on microstructure, and mechanical and anti-oxidation properties between TiN and Ti-Si-N films were performed. The Ti-Si-N films were deposited on high-speed steel and silicon wafer substrates by plasma-assisted chemcial vapor deposition(PACVD) technique. The Si addition to TiN film caused to change the microstructure such as grain size refinement, randomly multi-oriented microstructure, and nano-sized codeposition of silicon nitride in the TiN matrix. The Ti-Si-N film, contains Si content of ∼7 at.%, showed the micro-hardness value of ∼3400 HK, which was higher than the pure TiN film whose hardness was ∼1500HK. The Ti-Si(7 at.%)-N film also showed much improved anti-oxidation properties compared with those of the pure TiN film. These properties were also related to the microstructure of Ti-Si(7 at.%)-N film was formed and retarded further oxidation of the nitridelayer. These properties were also related to the microstructure of Ti-Si(7 at.%)-N film which was characterized by nano-sized precipitates of silicon nitride phase in the TiN matrix and randomly oriented grains.

• Carbon letters
• /
• v.12 no.2
• /
• pp.116-119
• /
• 2011

C/SiC composites were prepared by boron nitride (BN)-assisted liquid silicon infiltration (LSI), and their anti-oxidation and mechanical properties were investigated. The microstructures, bulk densities, and porosities of the C/SiC composites demonstrated that the infiltration of liquid silicon into the composites improved them, because the layered-structure BN worked as a lubricant. Increasing the amount of BN improved the anti-oxidation of the prepared C/SiC composites. This synergistic effect was induced by the assistance of BN in the LSI. More thermally stable SiC was formed in the composite, and fewer pores were formed in the composite, which reduced inward oxygen diffusion. The mechanical strength of the composite increased up to the addition of 3% BN and decreased thereafter due to increased brittleness from the presence of more SiC in the composite. Based on the anti-oxidation and mechanical properties of the prepared composites, we concluded that improved anti-oxidation of C/SiC composites can be achieved through BN-assisted LSI, although there may be some degradation of the mechanical properties. The desired anti-oxidation and mechanical properties of the composite can be achieved by optimizing the BN-assisted LSI conditions.

• Journal of the Korean Society of Food Culture
• /
• v.18 no.2
• /
• pp.111-122
• /
• 2003

This studies were performed to develop a Korean traditional folk liquor namely Gangha-ju has been prepared at Bosung district in Korea, and manufacturing conditions and anti-oxidation activity and anti-microbial activity of Gangha-ju were investigated. Ethyl-alcohol 20% and 30% Gangha-ju were brewed with glutinous rice wine, distilled liquor and 6 herbs of ginger, cinnamon, etc. Chemical and physical properties of 30% Gangha-ju were acidity 0.22, pH 4.31, amino acidity 3.26, transmittance 59 and conductivity $911\;{\mu}s/m$, and 20% Gangha-ju were 0.43, 4.20, 6.26, 62 and $924\;{\mu}s/m$. Volatile flavor compounds of ethyl alcohol, acetic acid, butanol, n-amyl alcohol, iso-pentyl alcohol, ethyl acetate, butyl acetate, acetaldehyde and furfural were detected, and main aroma compounds of Gangha-ju were isopentyl alcohol and ethyl acetate. Anti-oxidation activity by DPPH method was evaluated 31.32%, and nitrite scavenging effect was 31.79%. Anti-microbial activity against several microorganisms was pronounced strong activity over a wide range of test organisms, and Leuconostoc mesenteroids and Salmonella Ttyphimurium, Staphylococcus epidermidis were found to be more sensitive to Gangha-ju than Escherichia coli and Aspergillus flavus.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.237-244
• /
• 2000

Phenolic resin used as a precursor of carbonized matrix for carbon-carbon composites was modified by addition of molybdenum disilicide (MoSi$_2$) in various concentrations of 0, 4, 12 and 20% by weight to improve the anti-oxidation properties of the composites. The green body was manufactured by a prepreg method and was submitted to carbonization up to 110$0^{\circ}C$. In this work, the oxidation behavior of carbon-carbon composites with MoSi$_2$ as an oxidation inhibitor was investigated at the temperature range of 600-100$0^{\circ}C$ in an air environment. The carbon-carbon composites with MoSi$_2$ showed a significantly improved oxidation resistance due to both the reduction of the porosity formation and the formation of mobile diffusion barrier for oxygen when compared to those without MoSi$_2$. Carbon active sites should be blocked, decreasing the oxidation rate of carbon. This is probably due to the effect of the inherent MoSi$_2$ properties, resulted from a formation of the protective layer against oxygen attack in the composites studied.

• Journal of the Korean Chemical Society
• /
• v.18 no.6
• /
• pp.443-446
• /
• 1974

The regenerated lubricating oils for an internal combustion engine, obtained from the sulfuric acid and clay treatment, showed an improved thermal oxidation stability regardless of additives, especially anti-oxidant, originally presented in the oils. It is believed that such improvement is due to the formation of anti-oxidant materials, which is observed by the in crease of 25 % of aromatic compounds.

• Journal of Sasang Constitutional Medicine
• /
• v.24 no.4
• /
• pp.51-61
• /
• 2012

Objectives : The purpose of this study was to investigate the anti-atherosclerotic effects of 4 herbal formulas for Sasang constitutional medicine (Yeoldahanso-tang: YDHST, Yanggyeoksanhwa-tang: YGSHT, Cheongsimyeonja-tang: CSYJT and Taeeumjowi-tang: TEJWT). Methods : The antioxidant activities of herbal formulas were studied by measuring free radical scavenging activities on ABTS and DPPH. The inhibitory effects on LDL oxidation was evaluated by the formation of TBARS, REM and fragmentation of apolipoprotein B-100 (ApoB). Effects of herbal formulas on macrophage lipid accumulation were determined in native LDL and LPS co-incubated macrophages using Oil Red O staining. Results : The scavenging activities on ABTS and DPPH of herbal formulas were increased in dose-dependent manner (YDHST>YGSHT>CSYJT>TEJWT). Herbal formulas reduced the oxidation properties of LDL induced by $CuSO_4$. YDHST, YGSHT and CSYJT showed strong suppressive effect on LDL oxidation than TEJWT. In addition, YDHST, YGSHT and CSYJT significantly inhibited foam cell formation in LDL/LPS stimulated RAW 264.7 cells. Conclusions : These results demonstrate that YDHST, YGSHT and CSYJT have potentials on anti-atherosclerosis by antioxidative effect and suppressive effect on LDL oxidation.

• Journal of Powder Materials
• /
• v.22 no.4
• /
• pp.271-277
• /
• 2015

As wrought stainless steel, sintered stainless steel (STS) has excellent high-temperature anti-corrosion even at high temperature of $800^{\circ}C$ and exhibit corrosion resistance in air. The oxidation behavior and oxidation mechanism of the sintered 316L stainless was reported at the high temperature in our previous study. In this study, the effects of additives on high-temperature corrosion resistances were investigated above $800^{\circ}C$ at the various oxides ($SiO_2$, $Al_2O_3$, MgO and $Y_2O_3$) added STS respectively as an oxidation inhibitor. The morphology of the oxide layers were observed by SEM and the oxides phase and composition were confirmed by XRD and EDX. As a result, the weight of STS 316L sintered body increased sharply at $1000^{\circ}C$ and the relative density of specimen decreased as metallic oxide addition increased. Compared with STS 316L sintered parts, weight change ratio corresponding to different oxidation time at $900^{\circ}C$ and $1000^{\circ}C$, decreased gradually with the addition of metallic oxide. The best corrosion resistance properties of STS could be improved in case of using $Y_2O_3$. The oxidation rate was diminished dramatically by suppression the peeling on oxide layers at $Y_2O_3$ added sintered stainless steel.

• Carbon letters
• /
• v.2 no.1
• /
• pp.27-36
• /
• 2001

The pack-cementation process is the method which is formed SiC coating layer to improve weak oxidation properties of CFRCs (carbon fiber-reinforced carbons). This method develops the anti-oxidation coating layer having no dimensional changes and good wetting properties. In this study to improve the oxidative resistance of the prepared 4D CFRCs, the surface of CFRCs is coated by SiC using pack cementation method. The mechanical properties of SiC-coated 4D CFRCs are measured by the 3-point bending test, and their ablation properties are investigated by the arc torch plasma test. From the results, it is found that both mechanical and ablation properties of SiC-coated 4D CFRCs are much better than bare CFRCs.

• Journal of the Korean Society for Heat Treatment
• /
• v.16 no.6
• /
• pp.335-340
• /
• 2003

To improve properties of wear resistance and anti-corrosion of the trivalent chromium platings, oxinitrocarbunsing and steam oxidation were conducted. Armophous trivalent Cr platings could be transformed to chromium carbides of high hardness, that showed low friction and wear rate. Even though micro-cracks were within as platings, superior anti-corrosion property was obtained by these treatments due to healing of cracks at the interface between the trivalent chromium platings and substrate.

• Composites Research
• /
• v.16 no.3
• /
• pp.41-48
• /
• 2003

In this work, the effect of molybdenum disilicide(MoSi$_2$) content on the impact properties of carbon-carbon composites(C/C composites) was investigated in the presence of MoSi$_2$. The content of MoSi$_2$ was varied in 0, 4, 12 and 20 wt% on the basis of resin matrix for anti-oxidation properties of the composites under high temperature. As a result, the composites made with MoSi$_2$ resulted in an increase of interfacial adhesion between fibers and matrix, which could improve the impact properties of the composites. Especially, 12 wt% Mosi$_2$ composites showed the highest impact properties in the present system. This was probably due to the existence of brittle-to-ductile transition(BDT) properties of MoSi$_2$ in the vicinity of 90$0^{\circ}C$, resulting from increasing the interfacial adhesion force among fibers, filler, and matrix in the composites.