• Imaging Science in Dentistry
• /
• v.38 no.1
• /
• pp.1-5
• /
• 2008

Purpose: The primary aims of this retrospective study were to compare subjective bone quality and bone quality based on the Hounsfield scale in different segments of the edentulous jaw, and to establish quantitative and objective assessment of the bone quality. Materials and Methods: Twenty eight randomly selected cone-beam computed tomographic (CBCT) scans were analyzed. For evaluation one hundred and twelve edentulous areas were selected. Implant recipient sites were evaluated visually for Lekholm and Zarb classification. The same sites were subsequently evaluated digitally using the Hounsfield scale with Vimplant$2.0^{TM}$, and the results were correlated with visual classification. Data was subject for statistical analysis in order to determine correlation between recorded HU and the regions of the mouth with the Kruskal-Wallis test. Results: The highest unit/mean density value (311 HU) was found in the anterior mandible, followed by 259 HU for the posterior mandible, 216 HU for the anterior maxilla, and 127 HU for the posterior maxilla. These results demonstrate a strong correlation for HU depending on the region of the mouth (p<0.001). The relationship between HU and type 4 bone was found to be significant (r=0.74). Conclusion: Knowledge of the Hounsfield value as a quantitative measurement of bone density can be helpful as a diagnostic tool by using $CBMercuRa6^{TM}$ with $Vimplant^{TM}$ software.

• The korean journal of orthodontics
• /
• v.21 no.3
• /
• pp.673-683
• /
• 1991

This research was performed to find out the adaptation patterns of maxillary and mandibular posterior teeth to the changes in relationships of vertical skeletal components, which constitute the skeletofacial complex. For this research, 61 adult malocclusion patients were chosen as subjects according to the Hellman's dental age with normally ranged FMN-A-B angle. These subjects were divided into 4 groups in maxilla and 3 groups in mandible according to mesiodistal inclinations of teeth. Following results were obtained after studying the relationships of the vertical skeletal components between each group. 1. Inspire of the fact that the FMN-A-B angle was within a normal range, the degree of mesiodistal inclinations of maxillary and mandibular posterior teeth showed differences in relation to the anteroposterior relationships of maxilla and mandible. In case where the FMN-A-B angle was large, the mesial inclinations of maxillary posterior teeth showed more increase from the posterior to the anterior, whereas in mandible it showed overall decrease. 2. The degrees of mesial inclinations of mandibular posterior teeth were increased when the angulations of lower facial height, occlusal plane angle and mandibular plane angle were greater. 3. The patterns of mesial inclinations of maxillary posterior teeth were varied according to the angulation of lower facial height. If relatively large, it showed more increase from the posterior to the anterior and it was decreased nearly consistent when the angulation was small. 4. The degrees of mesial inclinations of maxillary posterior teeth were decreased as the lower facial height, palatal plane angle, occlusal plane angle and the mandibular plane angle became greater.

• Imaging Science in Dentistry
• /
• v.40 no.4
• /
• pp.179-185
• /
• 2010

Purpose : Cortical bone thickness is one of the important factor in mini-implant stability. This study was performed to investigate the buccal cortical bone thickness at every interdental area as an aid in planning mini-implant placement. Materials and Methods : Two-dimensional slices at every interdental area were selected from the cone-beam computed tomography scans of 20 patients in third decade. Buccal cortical bone thickness was measured at 2, 4, and 6 mm levels from the alveolar crest in the interdental bones of posterior regions of both jaws using the plot profile function of $Ez3D2009^{TM}$ (Vatech, Yongin, Korea). The results were analyzed using by Mann-Whitney test. Results : Buccal cortical bone was thicker in the mandible than in the maxilla. The thickness increased with further distance from the alveolar crest in the maxilla and with coming from the posterior to anterior region in the mandible (p<0.01). The maximum CT value showed an increasing tendency with further distance from the alveolar crest and with coming from posterior to anterior region in both jaws. Conclusion : Interdental buccal cortical bone thickness varied in both jaws, however our study showed a distinct tendency. We expect that these results could be helpful for the selection and preparation of mini-implant sites.

• Journal of Periodontal and Implant Science
• /
• v.40 no.2
• /
• pp.56-60
• /
• 2010

Purpose: The sinus lift procedure requires detailed knowledge of maxillary sinus anatomy and the possible anatomical variations. This study evaluated the location and prevalence of maxillary sinus septa using computed tomography (CT). Methods: This study was based on the analysis of CT images for posterior maxilla which were obtained from patients who visited Chonbuk National University Dental Hospital during the period of June 2007 to December 2008. With the exclusion of cases presenting any pathological changes, 236 maxillary sinuses in 204 patients were retrospectively analyzed. The average age of the patients was 50.9. The cases were divided into two groups, an atrophy/edentulous segment and a non-atrophy/dentate segment, and maxillary sinus septa of less than 2.5 mm were not taken in-to consideration. The location of septa was also divided for analysis into 3 regions: the anterior (1st and 2nd premolar), middle (1st and 2nd molar) and posterior (behind 2ndmolar) regions. Results: In 54 (20.9%) of the 204 patients there were pathologic findings, and those patients were excluded from the analysis. Sinus septa were present in 58 (24.6%) of the 236 maxillary sinuses and in 55 (27%) of the 204 total patients. In the atrophy/ edentulous ridge group (148 maxillary sinuses), 41 cases (27.7%) were found, and 17 cases (19.3%) were found in the non-atrophy/ dentulous ridge group (88 maxillary sinuses). In terms of location, septa were found in 18 cases (27.3%) in the anterior, in 33 cases (50%) in the middle and in 15 cases (22.7%) in the posterior regions. Conclusions: In the posterior maxilla, regardless of type of ridge (atrophy/edentulous or non-atrophy/dentate), the anatomical variation of sinus septa is diverse in its prevalence and location. Thus, accurate information on the maxillary sinus of thepatient is essential and should be clearly understood by the surgeon to prevent possible complications during sinus lifting.

• The Journal of Korean Academy of Prosthodontics
• /
• v.18 no.1
• /
• pp.99-109
• /
• 1980

An investigation was made Into 1,357 fixed bridges which had been performed at the Department of Prosthetic Dentistry, Seoul National University Hospital from 1973 to 1979. The purpose of this investigation was to establish a basic reference of the treatment with fixed bridges by obtaining statistical conclusions from the data concerning the patients who had been treated with fixed bridges. The following conclusions were obtained; 1. The ratio of the fixed bridges made on the maxillae to those made on the mandible was 1:1. 2. The cases of fixed bridges with one pontic were the most frequent, i.e., 946 cases out of total 1,357 cases, which were 69.7% of the total. 3. As the number of missing teeth increased, the number of the relevant cases of fixed bridges decreased. 4. The most frequent age group of the patients who had been treated with fixed bridges was the twenties, which was 40.8% of the total. As the age of the patients increased, the number of corresponding cases of fixed bridges decreased. 5. Most of the fixed bridges with more than three pontics were made at the anterior portion samely on the maxilla and on the mandible. 6. As for the retainers, the porcelain fused to metal crown and the partial veneer crown were frequently used at the anterior portion, while the full veneer crown was frequently used and the inlay and the attachment were used in some cases at the posterior portion. The locations of fixed bridges in the order of their frequency were: canine, lateral incisor, second bicuspid, central incisor, second molar, first bicuspid, first molar, and third molar on the maxilla; second bicuspid, second molar, first bicuspid, first molar, canine, third molar, lateral incisor, and central incisor on the mandible.

• Imaging Science in Dentistry
• /
• v.54 no.1
• /
• pp.33-41
• /
• 2024

Purpose: The aims of this study were to create a deep learning model to distinguish between nasopalatine duct cysts (NDCs), radicular cysts, and no-lesions (normal) in the midline region of the anterior maxilla on panoramic radiographs and to compare its performance with that of dental residents. Materials and Methods: One hundred patients with a confirmed diagnosis of NDC (53 men, 47 women; average age, 44.6±16.5 years), 100 with radicular cysts (49 men, 51 women; average age, 47.5±16.4 years), and 100 with normal groups (56 men, 44 women; average age, 34.4±14.6 years) were enrolled in this study. Cases were randomly assigned to the training datasets (80%) and the test dataset (20%). Then, 20% of the training data were randomly assigned as validation data. A learning model was created using a customized DetectNet built in Digits version 5.0 (NVIDIA, Santa Clara, USA). The performance of the deep learning system was assessed and compared with that of two dental residents. Results: The performance of the deep learning system was superior to that of the dental residents except for the recall of radicular cysts. The areas under the curve (AUCs) for NDCs and radicular cysts in the deep learning system were significantly higher than those of the dental residents. The results for the dental residents revealed a significant difference in AUC between NDCs and normal groups. Conclusion: This study showed superior performance in detecting NDCs and radicular cysts and in distinguishing between these lesions and normal groups.

• The korean journal of orthodontics
• /
• v.19 no.1 s.27
• /
• pp.201-218
• /
• 1989

This study was focused on the distribution of different facial types of the Class II division I malocclusion groups and skeletal characteristics of the each group and those that anteropsterior relationship of the maxilla and mandible calculated from the analysis of ANB angle and Wits appraisal was quite different from each other, as well. Cephalometric headplates of 140 persons of Class II division 1 malocclusion whose mean age was 11.2 years and 69 persons of normal occlusion whose mean age was 12.2 years were utilize as materials. Measurements were recorded, tabulated and statistically analyzed employing the tracings of the lateral cephalograms, then Class II division 1 malocclusion group was divided into 9 Types according to the angle of SNA and SNB for the anteroposterior relationship of the maxilla and mandible, another 9 Types according to the FH-NPog and SN-MP for the horisontal and vertical relationship, and the other 9 Types according to the ANB and Wits appraisal for intermaxillary relationship as well, with which was based on $Mean{\pm}$ 1SD of those of normal occlusion. The result allowed the following conclusion: 1. $37.1\%$ of population demonstrated maxilla within nounal range and retrognathic mandible to the cranial base, $30\%$ for both maxilla and mandible within normal range, $20\%$ for retrognathic maxilla and mandible and $12.9\%$ of the rest were ananged in Class II division 1 maloccusion groups. 2. Retrognathic mandible and hyperdivergent face accounted for $30.7\%$, mesognathic mandible and neutrodivergent face for $29.3\%$, mesognathic mandible and hyperdivergent face for $16.4\%$, retrognathic mandible and neutrodivergent face for $13.6\%$, mesognathic mandible and hypodivergent face for $10\%$ of population were computed in Class II division 1 malocclusion groups. 3. It was suggested that skeletal Class II malocclusion might be due to anomaly in size and shape of cranial base, underdevelopment of mandible, retropositioning of mandible, underdevelopment of posterior face against anterior face, or any combination of these factors. 4. Population with underdevelopment and / or retropositioning of the mandible showed hyperdivergent tendency of facia profile. 5. The ANB angle and Wits appraisal did not coincide the severity of anteroposterior dysplasia in $35.7\%$ of Class II division 1 malocclusion group each other, and this inconsistency was suggested to be related with mandibular rotation, inclination of cranial base, and anteroposterior position of the maxilla.

• The korean journal of orthodontics
• /
• v.29 no.1 s.72
• /
• pp.23-35
• /
• 1999

Lateral cephalograms or 251 males md 286 females were taken and pubertal growth pattern or cranial base, maxillary and mandible of 7 to 17 years old Korean children was evaluated. 10 landmarks and 16 analytical measurements were evaluated. Analytical measurement and annual difference for each age group was calculated and tested for statistical significance. Analytical measurements were classified into three groups which were cranial base, maxillary and mandibular measurements and also classified into make and female measurements. Following results were achieved. 1. The circumpuberal growth spurt was earlier in Korean females than in males. 2. Cranial base, maxilla and mandible showed circumpuberal growth. The cranial base showed a relatively smaller amount of growth than the facial complex. 3. Middle and posterior cranial base length showed a floater increase than anterior cranial base length and circumpuberal growth spurt was also more definite. 4. the forward and downward growth or maxilla results from maxillary growht itself and transposition or the maxilla due to circumsutural growth aroud the maxilla. Ar-ANS and Ar-Pr which represent maxillary position relative to the cranial base showed more growth than ANS-PNS which represents maxillary bone growth. 5. mandible showed more vertical growth than horizontal growth but without significance. 6. Alveolar gwoth of maxilla and mandible show maximum growth rate of the time of permanent teeth eruption following loss of deciduous teeth . After this period alveolar growth shows a decreasing tendency.

• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.205-227
• /
• 1992

This study was aimed to investigate the characteristics & the causative areas of the adult skeletal class III malocclusions with different facial divergency. The lateral cephalograms of 80 subjects with skeletal class III malocclusion from 17 to 29 years of age were classified into 3 groups according to SN-MP angle; hypodivergent group $(21.65{\pm}3.52^{\circ})$, neutrodivergent group $(30.50{\pm}2.29^{\circ})$ and hyperdivergent group $(40.02{\pm}3.98^{\circ})$. The data were gathered by digitizing of the traced cephalograms and were statistically analyzed. The results were as follows: 1. The anterior cranial base of the hyperdivergent group was shortest & tipped upwardly to the FH plane. 2. The maxilla of hyperdivergent group was shortest anteroposteriorly and positioned posteriorly to the anterior cranial base. 3. The degree of the mandibular prognathism in hyperdivergent group was less than the hypodivergent group. The hyperdivergent group showed the downward & backward rotated mandible. 4. The mandibular ramus & body was short & slender in the hyperdivergent group and the gonial angle was greatest in the hyperdivergent group. 5. The temporomandibular joint was positioned more superiorly to the anterior cranial base in the hyperdivergent group. 6. The cranial base, palatal plane, occlusal plane and mandibular plane were diverged in the hyperdivergent group. And this group had a great anterior total facial height, especially anterior lower facial height. 7. The craniofacial characteristics of skeletal class III malocclusion were critical in the vertical structure than the horizontal.

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.347-355
• /
• 2001

Maxillary and mandibular anterior dental arches often have the problems of occlusal relation and esthetics by malformations of teeth, congenital missing, et at. Though the clinician usually use the anterior ratio to overcome this problems, he has the limitation of a direct application this ratio to the prediction of anterior occlusal relationship by the change of anterior ratio as dental arch form, intercanine width, segment depth and arch perimeter. So this study examine maxillary and mandibular anterior dental arch forms by least square method using Korean normal occlusion models(man : 20 casts, woman : 20 casts). Maxillary and mandibular anterior dental arches of Korean normal occlusion models are curve fitted to polynomial function, beta function, hyperbolic cosine function in order. And this accuracy of curve fitting is constant regardless of man/woman and maxilla/mandible. The relationships between intercanine width, segment depth, and arch perimeter based on this owe fitted dental arch form are acquired. This relationships will give the prediction of anterior dental arch form and the information of more accurate anterior ratio according to intercanine width.