• ETRI Journal
• /
• v.46 no.4
• /
• pp.571-580
• /
• 2024

A compact triple-band porous electromagnetic bandgap structure-loaded coplanar-waveguide-fed wearable antenna is introduced for applications of wireless body area networks. The porous structure is aimed to create a stopband or bandgap in the electromagnetic spectrum and increase breathability. The holes in the bottom electromagnetic bandgap surface increase the inductance, which in turn increases the bandwidth. The final design resonates at three bands with impedance bandwidths of 264 MHz, 100 MHz, and 153 MHz and maximum gains of 2.18 dBi, 6.75 dBi, and 9.50 dBi at 2.45 GHz, 3.5 GHz, and 5.5 GHz, respectively. In addition, measurements indicate that the proposed design can be deformed up to certain curvature and withstand human tissue loading. Moreover, the specific absorption rate remains within safe levels for humans. Therefore, the proposed antenna can suitably operate in the industrial, scientific, and medical, Bluetooth, Wi-Fi, and WiMAX bands for potential application to wireless body area networks.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.3
• /
• pp.123-129
• /
• 2003

In this paper, a relationship between AC discharge progress and the radiated electromagnetic waves was investigated by measuring electromagnetic waves using a biconical antenna and a spectrum analyzer. The frequency spectrum of the radiated electromagnetic waves were measured at the atmospheric pressure in liquid nitrogen($LN_2$) during partial discharges progressed by AC high voltage in nonuniform electric field. Front the results of this study, a new method was introduced for measurement and analysis of the radiated electromagnetic waves with discharge progress in $LN_2$ Besides. according to the consideration of the mutual relation between frequency spectrum of the radiated electromagnetic waves and discharge progress, it was confirmed that detecting partial discharge and estimating discharge progress could be possible. It is considered that these results obtained from this investigation may be used as fundamental data for diagnosis and prediction of electric insulations about superconducting and cryogenic power equipments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.223-230
• /
• 2004

A method for measuring array manifold which is the array antenna response of incident signal is presented. Array manifold measurement procedure by the presented method is explained for UCA(Uniform Circular Array), and spatial spectrum of 300 ㎒ tone signal incident on UCA is estimated by MUSIC algorithm in which spatial spectrum peak is searched with measured array manifold. Spatial spectrum estimation using array manifold measured by the proposed method shows superior performance to calculated array manifold.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.440-447
• /
• 2007

The switched diversity, although its performance is a little inferior to the selection diversity, is widely used due to its advantage that only one RF circuit is required for its operation without respect to the number of antennas in use. In this paper, we propose an application of the antenna switched diversity to a spread spectrum system with adaptive modulation and derived the optimal antenna switching threshold to maximize the average transmission bit rate. We also compared the performances of the proposed system with those of the two cases using a single antenna and the selection diversity with two antennas in terms of the average number of bits per symbol(BPS), the probability of no transmission, and the average BER. The performance analysis shows that, if the number of paths in a multipath channel environment increases, the performance of the proposed scheme becomes closer to that of the selection diversity based system in terms of the average BPS. Furthermore, the proposed scheme produces as almost high the probability of no transmission as the selection diversity based system for the case of low average SNR, although the former yields a little higher probability of no transmission than the latter fer the case of high average SNR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.512-519
• /
• 2016

This paper presents spectrum utilization strategies in cognitive radio (CR) networks powered by multi-antenna based wireless energy transfer. Secondary access point (AP) with multiple antennas should transfer the energy to the secondary sensor nodes with energy beamforming and simultaneously induces no interference to PUs. In addition, sensor nodes can transmit information to the secondary AP using the harvested energy, only when the spectrum is not utilized by PUs. We analyze the achievable rate of the CR sensor networks and propose an interference nulling energy beamforming method to maximize the achievable rate. Finally, we also propose a frame scheduling algorithm in which the durations of wireless energy transfer/information transfer frames (phases) are optimized.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.60-65
• /
• 2011

Wireless devices can communicate between each other without existing infrastructure in mobile Ad-hod network. Ad hoc networks can be used under difficult conditions, where it is difficult to construct infrastructures, such as shadowing areas, disaster areas, war area, and so on. In order to support to considerable and various wireless services, more spectrum resources are needed. However, efficient utilization of the frequency resource is difficult because of spectrum scarcity and the conventional frequency regulation. Ad-hoc networks employing cognitive radio (CR) system that guarantee high spectrum utilization provide effective way to increase the network capacity. In this paper, to improve detection performance of the energy detection which is widely used in CR based ad-hoc network, we propose multiple antenna system for CR based ad-hoc networks.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.108-113
• /
• 2006

This paper includes the test results of KOMPSAT-2 payload downlink system which were measured for the purpose of performance verification. The antenna beam patterns which indicates the status of the interface & antenna itself, were measured as well as the antenna VSWR. The checkout of the transponder & its spectrum was followed and this made sure that there was no spurious output distinguished. Finally a test for BER verification was conducted between satellite and receiving system for their compatibility through the antenna-to-antenna connection using an antenna hat. Verification tests for an RF system should be performed after relocation, integration and test for environments in order to make sure that no degradation happens.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.8
• /
• pp.617-622
• /
• 2016

The article describes the determination of the dynamic stability for an observation antenna, considering the rotational speed by the payload driving motor. A finite element model of the observation antenna was made using the solid and beam elements. The connecting parts between the solid and the beam was adequately coupled. The boundary conditions were made by restriction of the degree of freedoms in the supporting points. With the comparison between the modal analysis results and the rotating speed of the payload driving motor, no resonance for the structure of antenna was identified and first natural frequency was determined under 33 Hz (Seismic Cut-Off Frequency). Therefore, the dynamic stability of the antenna was confirmed by the comparism between the seismic safety criterion and the stress results of the dynamic analysis applied the loading conditions and required response spectrum (RRS).

• ETRI Journal
• /
• v.26 no.1
• /
• pp.45-47
• /
• 2004

A resolution enhancement method for estimating the direction-of-arrival (DOA) of signals is presented. The proposed method is by virtually expanding a real array into virtual arrays and then averaging the spatial spectrum of the virtual arrays, each of which has a different aperture size. Superior DOA resolutions are shown in comparison with the standard algorithm, MUltiple SIgnal Classification (MUSIC), for incoherent signals incident on a uniform circular array.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.118-118
• /
• 2010

In this paper, we analyzed the frequency spectrum of radiated electromagnetic waves which is generated by corona discharges as a basic study to develop a on-line diagnostic technique for power facilities installed in a closed-switchboard. Five types of electrode system were arranged to simulate corona discharge. The experiment was carried out in an electromagnetic shielding room, and the measurement system consists of an Ultra Log Antenna and an EMI Test Receiver. These results showed that the frequency spectrum of corona discharges exists widely in ranges from 30 to 1,000 [MHz].