• 전기학회논문지
• /
• 제61권1호
• /
• pp.110-116
• /
• 2012

This paper proposes a new diversity antenna which is the base of MIMO, tunable and reconfigurable antennas. The antenna has a small size and high inter-antenna isolation resulting from the compact radiating element comprising a meandered line and an open-loop combined in one limited uniplanar space and a modified T-shaped decoupling structure, respectively. In a WiMAX band, the radiating element and the entire antenna are $0.092{\lambda}$ and $0.2216{\lambda}$ in size, which shows effective size-reduction and the gain and efficiency of the proposed antenna attached to the ground of a handheld device are 3.7dBi and 56% acceptable to the industrial standard.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.622-627
• /
• 2014

A method to reduce the specific absorption rate(SAR) of the antenna for WiMAX mobile communication is proposed in this paper. The SAR reduction is achieved by miniaturizing the physical size of the antenna for the given resonance frequency by devising a metamaterial-composite right- and left-handed(CRLH) configuration-based radiator much smaller than the quarter-guided wavelength adopted a lot in the conventional planar inverted F antenna(PIFA) or modified monopole antenna. The proposed antenna is placed near the head-phantom and its SAR is evaluated by the full-wave simulations(SEMCAD X), where the metamaterial-inspired antenna is shown to have the lower value than a modified monopole as the reference in terms of the SAR.

• 한국전자파학회논문지
• /
• 제13권7호
• /
• pp.633-640
• /
• 2002

본 논문에서는 이중공진 칩 meander 안테나를 제안하였다. 제안된 안테나는 기존 meander 안테나의 소형화 특성을 유지하면서 인접한 주파수에서 이중공진하는 특징을 갖는다. LTCC-MLC 공정을 이용하여 제작하였고, 2.20 GHz와 2.883 GHz에서 이중공진(주파수비=1.35)하며, meander 패치의 크기는 15.7 mm $\times$ 6.52 mm( 0.32 λg $\times$ 0.133 λg)이다. 그리고 이중공진 meander 안테나의 추가적인 소형화를 위해 3차원 구조를 제안한다. 이 3차원 구조를 이용하여 약 50 %의 크기를 추가적으로 소형화하였다. 전류분포를 통해 제안된 안테나가 이중공진하는 원리를 확인하였고, 제작된 안테나의 반사손실 및 방사패턴의 특성을 분석하였다.

• 한국항행학회논문지
• /
• 제16권1호
• /
• pp.35-40
• /
• 2012

본 논문에서는 선박 통신용 HF 휩 안테나의 소형화 방법을 제안한다. HF 휩 안테나의 크기를 줄이기 위해 선형 휩 안테나의 끝 부분을 헬리컬 형태로 변형하였다. 상용 휩 안테나에 비해 60% 정도의 크기를 갖는 휩 안테나를 설계하였고, 상용의 휩 안테나와 변형된 휩 안테나를 사용한 통신실험을 수행하였다. 실험을 통해 제안하는 휩 안테나가 선박 통신용 상용 휩 안테나를 대체할 수 있음을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.327-330
• /
• 2003

A novel compact circular polarization operation of the microstrip antenna with four-slits and T-slits is proposed. The mechanism for compact size antenna is investigated with the behavior of the currents on the radiating patch. The equivalent surface current path due to the slits is lengthened, reducing the resonant frequency at a fixed patch size. The proposed compact CP design can have an antenna size reduction of about 33 ∼ 45％ as compared to the conventional microstrip antenna. Details of the experimental and measured results are presented and analysed.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.473-477
• /
• 2003

In this paper, a integrated structure of a two-element microstrip patch antenna with two feeds for GPS/PCS dual-band operation is proposed. The radiating element for PCS operation is a novel broad band low-profile cylindrical monopole top-loaded with a shorted meander patch, which gives linearly polarized conical radiation pattern and size reduction of patch due to meander line. The radiating element for GPS operation is a novel square-ring microstrip patch with truncated corners and slits. which provide circularly polarized broadside radiation patterns and size reduction due to slots. using dielectric substrate in GPS antenna of proposed antenna provide to improve isolation between two feeds and reduce size of patch. The proposed antenna achieves the bandwidth and polarization requirements of GPS and PCS systems.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.464-467
• /
• 2003

In this paper, to reduce the patch size of microstrip antenna, folded surface-type patch antenna is designed and fabricated. Size reduction could be achieved because of the downed resonant frequency by the extended current path passing along below the transformated patch surface. Comparison of the patch size at the 1.575 GHz between plane type(length 82 mm${\times}$width 90 mm) and "ㄷ"-shaped folded type is carried and comparision of frequency variation at the same patch size is carried. The result is like that the patch size was reduced than the plane type by 60 mm(73.17 %) at the same frequency. Therefore, it could be checked that "ㄷ"-shaped folded type antenna is advantageous than the plane type in size reduction.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.245-248
• /
• 2005

In this paper, small sized half-wavelength circular loop antenna which attached beneath a visor of helmet is designed and fabricated at the resonant frequency of 449MHz. To reduce the size of the antenna, double series-shorted stubs are inserted inside the loop for practical use of a vacant space of loop inside. Also, It is designed for the printed type to install the helmet easily. The size of antenna on helmet is reduced to 87.75%(diameter : 70mm, height :.36mm) compare with general type antenna(diameter : 200mm height 101mm). The return loss, -10dB bandwidth and gain are -13.2dB, 17.6MHz(3.9%), and -1.78dBd. And, radiation pattern is omni-directional pattern at H-plane. Therefore, it can be seen that the half-wavelength circular loop antenna using double series-shorted stubs is proper structure for the miniaturization and the installed antenna of the helmet.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.142-147
• /
• 2023

This paper presents a novel design of a differential patch antenna for 60-GHz millimeter-wave applications. The design process of the back-to-back (BTB) patch antenna is based on the conventional single-patch antenna. The initial design of the BTB patch antenna (Type-I) has a patch size of 0.66 × 0.98 mm² and a substrate size of 0.99 × 1.48 mm². It has a gain of 1.83 dBi and an efficiency of 94.4% with an omni-directional radiation pattern. A 0.4 mm-thick high-resistivity silicon (HRS) is employed for the substrate of the BTB patch antenna. The proposed antenna is further analyzed to investigate the effect of substrate size and resistivity. As the substrate resistivity decreases, the gain and efficiency degrade due to the substrate loss. As the substrate (HRS) size decreases approaching the patch size, the resonant frequency increases with a higher gain and efficiency. The BTB patch antenna has optimal performances when the substrate size matches the patch size on the HRS substrate (Type-II). The antenna is redesigned to have a patch size of 0.81 × 1.18 mm² on the HRS substrate in the same size. It has an efficiency of 94.9% and a gain of 1.97 dBi at the resonant frequency of 60 GHz with an omni-directional radiation pattern. Compared to the initial design of the BTB patch antenna (Type-I), the optimal BTB patch antenna (Type-II) has a slightly higher efficiency and gain with a considerable reduction in antenna area by 34.8%.

• 한국위성정보통신학회논문지
• /
• 제12권1호
• /
• pp.72-75
• /
• 2017

본 논문은 소형화와 고이득을 위하여 패치 안테나에 원형 슬릿을 구현하였으며 900 MHz 대역에서 동작이 되도록 설계하였다. 사각형 모양의 패치형태를 변형하여 안테나 크기를 일차적으로 줄였으며 나아가 패치 안에 원형 슬릿을 추가하여 추가적으로 안테나의 크기를 감소시켰다. 원형슬릿의 개수와 반지름을 설계 변수로 설정하여 원하는 대역에서 반사손실을 약 -30 dB까지 되도록 Tuning 하였으며 방사패턴의 최대 이득도 약 4 dBi에 이르도록 안테나의 설계를 수행하였다. 원형슬릿이 존재하지 않는 경우 대비 약 20 MHz 정도의 공진 주파수 하향천이를 구현하여 본 논문에서 설계한 안테나의 소형화가 달성되었음을 증명하였다.