• 제목/요약/키워드: Antenna Spacing

검색결과 88건 처리시간 0.027초

SUB-Y-TYPE ANTENNA ARRAY CONFIGURATION FOR HIGH RESOLUTION INTERFEROMETRIC SYNTHETIC APERTURE RADIOMETER

  • Kang, Gum-Sil;Jiang, Jingshan;Kim, Yong-Hoon
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.581-586
    • /
    • 2002
  • The development of 2-D radiometer is a new technical challenge for space borne remote sensing area. The Y-type antenna array has been proposed as a most efficient configuration because a large alias free FOV and a small-synthesized beam-width can be achieved compared to L-, T-type under the fixed antenna spacing. New configuration of antenna array, which is called sub-Y type configuration, is proposed to obtain a higher angular resolution than the case of Y-type array in the paper. The sub-Y type array is consisted of basic arrays, which are the Y-type array of four antenna elements. To analyze characteristics of the proposed configuration, the synthesized beam pattern is simulated through simulation. The secondary effect of the sub-Y-type is that the reconstructed image is suffered from the alias effect is appeared around the real target. The ghost targets in the reconstructed image can be reduced by the alias suppression algorithm introduced in this paper. In conclusion, the performance evaluation by use of array factor simulation shows more than 37.5% improvement in average for angular resolution and almost similar performance for temperature resolution.

  • PDF

Dumbbell 패치를 이용한 밀리미터파 대역 슬롯 도파관 안테나 (Slotted Waveguide Array Antenna using Dumbbell Patch for Millimeter-Wave)

  • 이정수;성영제;김영식
    • 한국전자파학회논문지
    • /
    • 제15권4호
    • /
    • pp.353-359
    • /
    • 2004
  • 본 논문에서는 슬롯 판과 도파관의 두 파트로 구성되어 있는 단층 구조의 슬롯 도파관 배열 안테나를 설계하였다. 슬롯 판과 도파관 사이의 전기적인 접촉을 구현하는 것이 대량 생산에 있어 가장 어려운 점이며 이를 위하여 Dumbbell 패치와 초크를 가지는 슬롯 도파관 배열 안테나를 제안하였다. 초크는 슬롯 판과 도파관 사이의 갭에 의해 발생하는 누설 전류를 막아 주지만 도파관 사이에 공간상의 손실이 발생하게 된다 본 논문에서는 Dumbbell 패치를 사용하여 공간상의 손실을 줄일 수 있었고, 16${\times}$16배열 안테나를 제작한 결과 27.2 ㏈의 이득과 45 %의 효율을 얻었다.

Hexagon 타일 부배열 안테나 시스템 구조 최적화에 관한 연구 (A Study on Optimization of Structure for Hexagon Tile Sub-array Antenna System)

  • 정진우;표성민
    • 전기전자학회논문지
    • /
    • 제26권1호
    • /
    • pp.129-132
    • /
    • 2022
  • 본 논문에서는 위상배열안테나의 부엽레벨을 최소화할 수 있는 부배열 시스템 구조의 최적화에 관한 기술을 제안하였다. 제안된 배열안테나 구조의 최적화는 6개의 육각배열을 한 개의 부배열과 육각 부배열의 육각형 배열 구조를 이용하여, 부배열의 배열간격과 부배열 사이의 배열 간격을 조절하여, 전체 위상배열안테나 시스템의 방사패턴을 최적화하였다. 제안된 기술은 2차원 평명배열안테나 시스템에 비하여, 24.3 dBi의 이득과 8.46도의 반치각은 변화없이 유지하며, 오직 x축과 y축 방향으로 각각 -3.4 dB와 -6.5 dB를 감소시켰다.

영차 공진을 이용한 전방향성 원형 편파 안테나 (Omnidirectional Circularly Polarized Antenna Using Zeroth-Order Resonance)

  • 박병철;이정해
    • 한국전자파학회논문지
    • /
    • 제20권8호
    • /
    • pp.806-812
    • /
    • 2009
  • 본 논문에서는 원형 버섯 구조에 구부러진 가지가 부착된 전방향성 원형 편파 안테나를 제안한다. 수직 편파와 전방향성의 방사 패턴을 얻기 위해 원형 버섯 구조의 영차 공진을 사용하였고, 수평 편파를 얻기 위해 구부러진 가지를 원형 버섯 구조에 부착하였다. 그리고 수직 편파와 수평 편파간의 $90^{\circ}$ 위상 차이를 위해 구부러진 가지와 원형 버섯 구조 사이에 위상 지연 선로를 삽입하였다. 따라서 제안된 안테나는 전방향성 원형 편파 특성을 가진다. 제안된 안테나는 기존에 보고된 전방향성 원형 편파 안테나에 비해 전기적인 크기가 38% 감소하였다. 또한, 별도의 $90^{\circ}$ 위상 천이기와 이중 급전의 필요 없이 간단하게 디자인이 가능하다. 제안된 안테나는 임피던스 정합과 방사 패턴의 향상을 위해 바주카 발룬을 사용하였다. 좀 더 개선된 3 dB 축비를 얻기 위해 최적화 과정을 거친 결과 린Y 평면에서 3 dB 축비를 만족하는 구간이 $86{\sim}282^{\circ}$로 측정되었다.

마이크로스트립 원형 편파 8$\times$2 위상 배열 안테나 (Microstrip 8$\times$2 circularly polarized phased array antenna)

  • 윤재승;이영주;박위상
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
    • /
    • pp.345-349
    • /
    • 2000
  • A microstrip polarized 8${\times}$2 linear phased array antenna with four 4-bit phase shifters is designed at 10 GHz. The 180$^{\circ}$and 90$^{\circ}$ sections of the phase shifter are of the switched line type, and the rests are of the loaded line type. A 2${\times}$2 sequential sub-array is adopted for a broad axial ratio bandwidth. The construction of the array antenna is of the tile type placing the phase shifters on the same layer containing the feed network. The element spacing is chosen to be 0.45λ$\sub$0/ to exclude the grating lobe. Measurement results show a gain 9.69 dB at broadside and 8.3 dB at the beam-tilt angle of 16$^{\circ}$ by imposing a progressive phase of 90$^{\circ}$.

  • PDF

X-대역 진행파 슬롯 배열 안테나 설계 (Design of An X-Band Traveling-Wave Slot Array)

  • 유상길;이석곤;최재현;안병철
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
    • /
    • pp.455-458
    • /
    • 2002
  • Design methods are presented for an X-band traveling-wave slot array realized on a rectangular waveguide. An array of 21 longitudinal slots is realized on the broad wall of a rectangular waveguide. The squint of the antenna main beam is adjusted using the element spacing and the waveguide broad wall dimension. The excitation of the array is controlled by the slot offset from the waveguide center line Multiple I-plane steps are placed around last slot elements so that the second-order beam due to tile reflected wave Is minimized A waveguide-to-coaxial adapter Is designed for feeding the array antenna from a coaxial system. Results of the design show an outstanding performance of the antenna 17.1 dB gain. 36"beam 1111, and -21 dB maximum sidelobe level.evel.

  • PDF

An Iterative MUSIC-Based DOA Estimation System Using Antenna Direction Control for GNSS Interference

  • Seo, Seungwoo;Park, Youngbum;Song, Kiwon
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제9권4호
    • /
    • pp.367-378
    • /
    • 2020
  • This paper introduces the development of the iterative multiple signal classification (MUSIC)-based direction-of-arrival (DOA) estimation system using a rotator that can control the direction of antenna for the global navigation satellite system (GNSS) interference. The system calculates the spatial spectrum according to the noise eigenvector of all dimensions to measure the number of signals (NOS). Also, to detect the false peak, the system adjusts the array antenna's direction and checks the change's peak angles. The phase delay and gain correction values for system calibration are calculated in consideration of the chamber's structure and the characteristics of radio waves. The developed system estimated DOAs of interferences located about 1km away. The field test results show that the developed system can estimate the DOA without NOS information and detect the false peak even though the inter-element spacing is longer than the half-wavelength of the interference.

평판이 삽입된 IBBD 배열 안테나의 복사 특성 분석 (Analysis of Radiation Characteristics of Plate-Inserted IBBD Array Antennas)

  • 최환기;최학근;김도경;정영배;전순익
    • 한국전자파학회논문지
    • /
    • 제19권11호
    • /
    • pp.1213-1222
    • /
    • 2008
  • 본 논문에서는 지능형 안테나 시스템을 위하여 IBBD 배열 안테나의 소자 간격 및 소자 사이에 삽입된 평판의 높이에 따른 격리도를 분석하였다. 배열 소자 사이의 격리도는 두 소자 사이의 배열 간격이 증가할수록 향상되고, 두 소자 사이에 평판을 삽입한 경우가 평판이 없는 경우보다 약 13 dB의 격리도가 향상되는 것을 확인하였다. 또, 평판이 삽입된 $4{\times}4$ 소자 IBBD 배열 안테나를 제작하여 평판의 높이에 따른 복사 특성을 측정하고 분석하였다. 평판의 높이가 증가함에 따라 이득이 약간 감소하나, 복사 패턴 형상에는 거의 변화가 없었다.

스트립이 추가된 소형 UWB 대수 주기 직각 삼각형-모양 다이폴 배열 안테나 (Compact UWB Log Periodic Right Triangle-Shaped Dipole Array Antenna Appended With Strips)

  • 여준호;이종익
    • 한국항행학회논문지
    • /
    • 제26권5호
    • /
    • pp.344-349
    • /
    • 2022
  • UWB 응용을 위해 스트립이 추가된 직각 삼각형-모양의 다이폴 소자로 구성된 소형 대수 주기 다이폴 배열 (LPDA; log periodic dipole array) 안테나를 제안하였다. 첫째, LPDA 안테나의 폭을 줄이기 위해 기존의 스트립 다이폴 소자 대신에 직각 삼각형-모양 다이폴 소자를 사용하였다. 둘째, 소자 사이의 간격을 줄여 LPDA 안테나의 길이를 줄였다. 마지막으로, 안테나의 폭을 더 줄이기 위해 직각 삼각형-모양 다이폴 소자의 양 팔의 끝에 스트립을 추가하였다. 16개의 다이폴 소자와 4 dBi 이상의 이득을 가지도록 제안된 안테나의 시제품을 FR4 기판에 44mm×30mm 크기로 제작하였다. 제작된 안테나의 전압 정재파비가 (VSWR; voltage standing wave ratio) 2 이하인 주파수 대역은 2.99-14.76 GHz로 UWB 대역을 만족하며, 측정된 이득은 4.0-5.5dBi이고 전후방비는 10 dB 이상이다. 제안된 소형 LPDA 안테나의 길이와 너비는 기존 LPDA에 비해 각각 40.9%와 20.6% 감소하였다.

직사각형 슬롯을 갖는 C-ITS용 패치 안테나에 대한 연구 (A Study on Patch Antenna for C-ITS with Rectangle Slot)

  • 강상원;장대순
    • 한국인터넷방송통신학회논문지
    • /
    • 제24권1호
    • /
    • pp.103-107
    • /
    • 2024
  • 본 논문은 직사각형 슬롯과 스트립 도체를 이용한 삼각 패치 안테나에 대한 연구이다. 직사각형 슬롯을 갖는 삼각 패치 안테나 특성을 확인하기 위해 슬롯 길이와 간격을 조정하였고, 복사 패치의 형태를 삼각형, 직사각형, 육각형으로 변화시켜 임피던스 매칭을 하였다. 안테나 파라미터 특성으로 확인하기 위해 HFSS 시뮬레이터를 이용하였다. 제안한 안테나 크기는 26 mm × 26 mm이다. 제안한 안테나에서 시뮬레이션을 통해 얻게 된 VSWR 2이하인 주파수 대역은 5.27 ~ 6.24 GHz이며, 주파수 대역폭은 970 MHz이다. 실제로 제작한 안테나의 주파수 대역은 5.24 ~ 6.38 GHz이고, 주파수 대역폭은 1140 MHz이다. 복사패턴을 확인한 주파수는 5.855 GHz, 5.890 GHz, 5.925 GHz이다. 최대 이득은 5.01 dBi이다. 모든 복사패턴에서 지향성 특징을 갖는 것을 확인할 수 있었다.